TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Bing, Yu
A1  - Wagner, Torsten
A1  - Yoshinobu, Tatsuo
A1  - Schöning, Michael Josef
T1  - Visualization of Defects on a Cultured Cell Layer by Utilizing Chemical Imaging Sensor
JF  - Procedia Engineering
N2  - The chemical imaging sensor is a field-effect sensor which is able to visualize both the distribution of ions (in LAPS mode) and the distribution of impedance (in SPIM mode) inthe sample. In this study, a novel wound-healing assay is proposed, in which the chemical imaging sensor operated in SPIM mode is applied to monitor the defect of a cell layer brought into proximity of the sensing surface.A reduced impedance inside the defect, which was artificially formed ina cell layer, was successfully visualized in a photocurrent image.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.806
SN  - 1877-7058
N1  - Part of special issue "Eurosensors 2015"
VL  - 120
SP  - 936
EP  - 939
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Scheja, S.
A1  - Wu, Chunsheng
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Electrostatic Detection of Unlabelled Single- and Double-stranded DNA Using Capacitive Field-effect Devices Functionalized with a Positively Charged Polyelectrolyte Layer
JF  - Procedia Engineering
N2  - Capacitive field-effect electrolyte-insulator-semiconductor sensors consisting of an Al-p-Si-SiO2 structure have been used for the electrical detection of unlabelled single- and double-stranded DNA (dsDNA) molecules by their intrinsic charge. A simple functionalization protocol based on the layer-by-layer (LbL) technique was used to prepare a weak polyelectrolyte/probe-DNA bilayer, followed by the hybridization with complementary target DNA molecules. Due to the flat orientation of the LbL-adsorbed DNA molecules, a high sensor signal has been achieved. In addition, direct label-free detection of in-solution hybridized dsDNA molecules has been studied.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.710
SN  - 1877-7058
N1  - Eurosensors 2015
VL  - 120
SP  - 544
EP  - 547
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Staat, Manfred
ED  - Nithiarasu, Perumal
T1  - Homogenization of a cardiac tissue construct
T2  - CMBE15 : 4th International Conference on Computational & Mathematical Biomedical Engineering ; 29th June - 1st July 2015 ; École Normale Supérieure de Cachan ; Cachan (Paris), France
Y1  - 2015
SN  - 2227-9385
N1  - Konferenzband unter:
http://www.compbiomed.net/getfile.php?type=12/site_documents&id=Proceedings_2227-9385_compressed.pdf
SP  - 645
EP  - 648
PB  - CMBE
CY  - [s.l.]
ER  - 
TY  - CHAP
A1  - Wallnöfer, Armin
A1  - Drath, Rainer
A1  - Hüning, Felix
T1  - Was ist Funktionales Engineering? Einordnung, Definition, Randbedingungen
T2  - Automation 2015 : 16. Branchentreff der Mess- und Automatisierungstechnik, 11. und 12. Juni 2015, Baden-Baden / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik
Y1  - 2015
SN  - 978-3-18-092258-4
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Wolf, Martin
A1  - Lenz, Laura L.
T1  - The economic effectiveness of serious games in the healthcare environment : application and evaluation of the Comparative Transformation Model (CTM)
T2  - IEEE 3rd International Conference on Serious Games and Applications for Health : SeGAH 2014 ; Rio de Janeiro, Brazil, May 14 - 16
Y1  - 2015
SN  - 978-1-4799-4823-9
U6  - http://dx.doi.org/10.1109/SeGAH.2014.7067089
SP  - 135
EP  - 142
PB  - IEEE [u.a.]
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Rahier, Michael
A1  - Ritz, Thomas
A1  - Wallenborn, Ramona
T1  - Information and communication technology for integrated mobility concepts such as E-carsharing
T2  - E-Mobility in Europe : trends and good practice
N2  - During the past decade attitude towards sharing things has changed extremely. Not just personal data is shared (e.g. in social networks) but also mobility. Together with the increased ecological awareness of the recent years, new mobility concepts have evolved. E-carsharing has become a symbol for these changes of attitude. The management of a shared car fleet, the energy management of electric mobility and the management of various carsharing users with individual likes and dislikes are just some of the major challenges of e-carsharing. Weaving it into integrated mobility concepts, this raises complexity even further. These challenges can only be overcome by an appropriate amount of well-shaped information available at the right place and time. In order to gather, process and share the required information, fleet cars have to be equipped with modern information and communication technology (ICT) and become so-called fully connected cars. Ensuring the usability of these ICT systems is another challenge that is often neglected, even though it is usability that makes carsharing comfortable, attractive and supports users’ new attitudes. By means of an integrated and consistent concept for human-machine interaction (HMI), the usability of such systems can be raised tremendously.
KW  - Information and communication technology
KW  - Fully connected car
KW  - E-carsharing
KW  - Mobility management
KW  - Integrated mobility
Y1  - 2015
SN  - 978-3-319-13193-1
U6  - http://dx.doi.org/10.1007/978-3-319-13194-8_17
SP  - 311
EP  - 326
PB  - Springer
CY  - Cham [u.a.]
ER  - 
TY  - CHAP
A1  - Busse, Daniel
A1  - Esch, Thomas
A1  - Muntaniol, Roman
T1  - Thermal management in E-carsharing vehicles - preconditioning concepts of passenger compartments
T2  - E-Mobility in Europe : trends and good practice
N2  - The issue of thermal management in electric vehicles includes the topics of drivetrain cooling and heating, interior temperature, vehicle body conditioning and safety. In addition to the need to ensure optimal thermal operating conditions of the drivetrain components (drive motor, battery and electrical components), thermal comfort must be provided for the passengers. Thermal comfort is defined as the feeling which expresses the satisfaction of the passengers with the ambient conditions in the compartment. The influencing factors on thermal comfort are the temperature and humidity as well as the speed of the indoor air and the clothing and the activity of the passengers, in addition to the thermal radiation and the temperatures of the interior surfaces. The generation and the maintenance of free visibility (ice- and moisture-free windows) count just as important as on-demand heating and cooling of the entire vehicle. A Carsharing climate concept of the innovative ec2go vehicle stipulates and allows for only seating areas used by passengers to be thermally conditioned in a close-to-body manner. To enable this, a particular feature has been added to the preconditioning of the Carsharing electric vehicle during the electric charging phase at the parking station.
KW  - Carsharing
KW  - Thermal management
KW  - Thermal comfort
KW  - Electrical vehicle
KW  - Passenger compartment
Y1  - 2015
SN  - 978-3-319-13193-1
U6  - http://dx.doi.org/10.1007/978-3-319-13194-8_18
SP  - 327
EP  - 343
PB  - Springer
CY  - Cham [u.a.]
ER  - 
TY  - BOOK
A1  - Kurz, Melanie
T1  - Handwerk oder Design : zur Ästhetik des Handgemachten
N2  - Manuelle Herstellung ist sozial fair, ökologisch nachhaltig und schafft qualitätsvolle Erzeugnisse! Vorbote für eine großformatige Rückkehr zum Handwerk und zur eigenhändigen Fertigung ist die Maker-Bewegung! – Solche Thesen begegnen uns gegenwärtig oft. Journalistische Texte, Filmdokumentationen, Werbung oder die Ästhetik von Produkten sind ihre Vehikel. Doch wie ist es um die Wiederbelebung des Handwerks tatsächlich bestellt? Und in welchem Verhältnis steht das Design – ein durch und durch industriebasiertes Berufsfeld – zu vorindustriellen Produktionsweisen? Diesen Fragen geht das vorliegende Buch ebenso auf den Grund wie der seit Beginn der Industrialisierung auftretenden Handwerksromantik. Es untersucht zudem, wie aktuelles Design die Sehnsucht nach dem Ursprünglichen mit formalen Kodes beantwortet und wie die visuellen Erscheinungsformen des Handgemachten ihre Wirkung freisetzen.
Y1  - 2015
SN  - 978-3-7705-5943-5 (Druckausgabe)
SN  - 978-3-8467-5943-1 (E-Book)
U6  - http://dx.doi.org/10.30965/9783846759431
PB  - Fink
CY  - Paderborn
ER  - 
TY  - JOUR
A1  - Takenaga, Shoko
A1  - Schneider, Benno
A1  - Erbay, E.
A1  - Biselli, Manfred
A1  - Schnitzler, Thomas
A1  - Schöning, Michael Josef
A1  - Wagner, Torsten
T1  - Fabrication of biocompatible lab-on-chip devices for biomedical applications by means of a 3D-printing process
JF  - Physica status solidi (a)
N2  - A new microfluidic assembly method for semiconductor-based biosensors using 3D-printing technologies was proposed for a rapid and cost-efficient design of new sensor systems. The microfluidic unit is designed and printed by a 3D-printer in just a few hours and assembled on a light-addressable potentiometric sensor (LAPS) chip using a photo resin. The cell growth curves obtained from culturing cells within microfluidics-based LAPS systems were compared with cell growth curves in cell culture flasks to examine biocompatibility of the 3D-printed chips. Furthermore, an optimal cell culturing within microfluidics-based LAPS chips was achieved by adjusting the fetal calf serum concentrations of the cell culture medium, an important factor for the cell proliferation.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201532053
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1347
EP  - 1352
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Bäcker, Matthias
A1  - Iken, Heiko
A1  - Poghossian, Arshak
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Concept for a biomolecular logic chip with an integrated sensor and actuator function
JF  - Physica status solidi (a)
N2  - A concept for a new generation of an integrated multi-functional biosensor/actuator system is developed, which is based on biomolecular logic principles. Such a system is expected to be able to detect multiple biochemical input signals simultaneously and in real-time and convert them into electrical output signals with logical operations such as OR, AND, etc. The system can be designed as a closed-loop drug release device triggered by an enzyme logic gate, while the release of the drug induced by the actuator at the required dosage and timing will be controlled by an additional drug sensor. Thus, the system could help to make an accurate and specific diagnosis. The presented concept is exemplarily demonstrated by using an enzyme logic gate based on a glucose/glucose oxidase system, a temperature-responsive hydrogel mimicking the actuator function and an insulin (drug) sensor. In this work, the results of functional testing of individual amperometric glucose and insulin sensors as well as an impedimetric sensor for the detection of the hydrogel swelling/shrinking are presented.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431913
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1382
EP  - 1388
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Warmer, Johannes
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
A1  - Kaul, Peter
T1  - Detection of triacetone triperoxide using temperature cycled metal-oxide semiconductor gas sensors
JF  - Physica status solidi (a)
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431882
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1289
EP  - 1298
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Delle, Lotta E.
A1  - Huck, Christina
A1  - Bäcker, Matthias
A1  - Müller, Frank
A1  - Grandthyll, Samuel
A1  - Jacobs, Karin
A1  - Lilischkis, Rainer
A1  - Vu, Xuan T.
A1  - Schöning, Michael Josef
A1  - Wagner, Patrick
A1  - Thoelen, Roland
A1  - Weil, Maryam
A1  - Ingebrandt, Sven
T1  - Impedimetric immunosensor for the detection of histamine based on reduced graphene oxide
JF  - Physica status solidi (a)
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431863
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1327
EP  - 1334
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Kümmell, Steffen
A1  - Hillgärtner, Michael
T1  - Inductive charging comfortable and nonvisible charging stations for urbanised areas
T2  - E-Mobility in Europe : trends and good practice
N2  - For a wide acceptance of E-Mobility, a well-developed charging infrastructure is needed. Conductive charging stations, which are today’s state of the art, are of limited suitability for urbanised areas, since they cause a significant diversification in townscape. Furthermore, they might be destroyed by vandalism. Besides for those urbanistic reasons, inductive charging stations are a much more comfortable alternative, especially in urbanised areas. The usage of conductive charging stations requires more or less bulky charging cables. The handling of those standardised charging cables, especially during poor weather conditions, might cause inconvenience, such as dirty clothing etc. Wireless charging does not require visible and vandalism vulnerable charge sticks. No wired connection between charging station and vehicle is needed, which enable the placement below the surface of parking spaces or other points of interest. Inductive charging seems to be the optimal alternative for E-Mobility, as a high power transfer can be realised with a manageable technical and financial effort. For a well-accepted and working public charging infrastructure in urbanised areas it is essential that the infrastructure fits the vehicles’ needs. Hence, a well-adjusted standardisation of the charging infrastructure is essential. This is carried out by several IEC (International Electrotechnical Commission) and national standardisation committees. To ensure an optimised technical solution for future’s inductive charging infrastructures, several field tests had been carried out and are planned in near future.
KW  - E-mobility
KW  - Inductive charging
KW  - Charging stations
KW  - Urban areas
Y1  - 2015
SN  - 978-3-319-13193-1
U6  - http://dx.doi.org/10.1007/978-3-319-13194-8_16
SP  - 297
EP  - 309
PB  - Springer
CY  - Cham [u.a.]
ER  - 
TY  - BOOK
A1  - Timme, Michael
T1  - BGB Crashkurs : der sichere Weg durch die Prüfung ; [Fall für Fall durch das Privatrecht]
Y1  - 2015
SN  - 978-3-406-68018-2
PB  - Beck
CY  - München
ET  - 3. Aufl.
ER  - 
TY  - CHAP
A1  - Vitting, Eva
A1  - Schmitz, Timo
A1  - Lenz, Florian
A1  - Querg, David
ED  - Schuh, Günther
T1  - Gib mir ein Zeichen! Visualisierunskonzepte, die Entscheidungshilfe bieten und versteckte Potentiale aufzeigen
T2  - Ergebnisbericht des BMBF-Verbundprojektes PROSENSE : hochauflösende Produktionssteuerung auf Basis kybernetischer Unterstützungssysteme und intelligenter Sensorik
Y1  - 2015
SN  - 978-3-86359-346-9
N1  - BMBF-Förderkennzeichen 02PJ2490
SP  - 148
EP  - 174
PB  - Apprimus-Verl.
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Chanson, Hubert
A1  - Bung, Daniel B.
A1  - Matos, J.
T1  - Stepped spillways and cascades
T2  - Energy dissipation in hydraulic structures / Hubert Chanson (ed.)
Y1  - 2015
SN  - 978-1-138-02755-8 (print) ; 978-1-315-68029-3 (e-Book)
SP  - 45
EP  - 64
PB  - CRC Press
CY  - Boca Raton, Fla. [u.a.]
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
ED  - Rowinski, Pawel
T1  - Laboratory models of free-surface flows
T2  - Rivers - physical, fluvial and environmental processes
N2  - Hydraulic modeling is the classical approach to investigate and describe complex fluid motion. Many empirical formulas in the literature used for the hydraulic design of river training measures and structures have been developed using experimental data from the laboratory. Although computer capacities have increased to a high level which allows to run complex numerical simulations on standard workstation nowadays, non-standard design of structures may still raise the need to perform physical model investigations. These investigations deliver insight into details of flow patterns and the effect of varying boundary conditions. Data from hydraulic model tests may be used for calibration of numerical models as well. As the field of hydraulic modeling is very complex, this chapter intends to give a short overview on capacities and limits of hydraulic modeling in regard to river flows and hydraulic structures only. The reader shall get a first idea of modeling principles and basic considerations. More detailed information can be found in the references.
KW  - Physical modeling
KW  - Similitude
KW  - Open channels
KW  - Hydraulic structures
Y1  - 2015
SN  - 978-3-319-17718-2 ; 978-3-319-17719-9
U6  - http://dx.doi.org/10.1007/978-3-319-17719-9_9
SP  - 213
EP  - 228
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Valero, Daniel
A1  - Bung, Daniel B.
T1  - Hybrid investigation of air transport processes in moderately sloped stepped spillway flows
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Balmes, Jan P.
A1  - Bung, Daniel B.
T1  - Numerical simulation of erosion processes on crossbar block ramps
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Valero, Daniel
T1  - Image processing for bubble image velocimetry in self-aerated flows
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - JOUR
A1  - Oertel, Mario
A1  - Bung, Daniel B.
T1  - Numerische Strömungssimulationen von Fließgewässern : Praxisanwendungen und zukünftige Entwicklungen
JF  - Korrespondenz Wasserwirtschaft : KW
Y1  - 2015
SN  - 1616-430X
VL  - 8
IS  - H. 3
SP  - 177
EP  - 182
PB  - Gesellschaft zur Förderung der Abwassertechnik
CY  - Hennef
ER  - 
TY  - CHAP
A1  - Bühler, P.
A1  - Leandro, J.
A1  - Bung, Daniel B.
A1  - Lopes, P.
A1  - Carvalho, R.
T1  - Measuring void fraction of a stepped spillway with non-intrusive methods using different image resolutions
T2  - 2nd International Workshop on Hydraulic Structures : Data Validation : Coimbra, Portugal, 8-9 May 2015
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Srivastava, Alok
A1  - Knolle, F.
A1  - Schnug, E.
A1  - Scherer, Ulrich W.
T1  - Study of Trace Elements in Water Bodies of the Harz Mts. Region, Germany using Total Reflection X Ray Fluorescence (TXRF)
T2  - DAE-BRNS 12th National Symposium on Nuclear and Radiochemistry NUCAR 2015, Feb. 9-13, Mumbai, India, Mumbai, India; 02/2015
Y1  - 2015
SP  - 355
EP  - 356
ER  - 
TY  - CHAP
A1  - Srivastava, Alok
A1  - Knolle, Friedhart
A1  - Hoyler, Friedrich
A1  - Scherer, Ulrich W.
A1  - Schnug, Ewald
T1  - Uranium Toxicity in the State of Punjab in North-Western India
T2  - Management of Natural Resources in a Changing Environment
N2  - Lately there has been an increasing concern about uranium toxicity in some districts of Punjab State located in the North Western part of India after the publication of a report (Blaurock-Busch et al. 2010) which showed that the concentration of uranium in hair and urine of children suffering from physical deformities, neurological and mental disorder from Malwa region (Fig. 1) of Punjab State was manifold higher than the reference ranges. A train which connects the affected region with the nearby city of Bikaner which has a Cancer Hospital has been nicknamed as Cancer Express due to the frenzy generated on account of uranium related toxicity.
Y1  - 2015
SN  - 978-3-319-12559-6
U6  - http://dx.doi.org/10.1007/978-3-319-12559-6_21
SP  - 271
EP  - 275
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Fissabre, Anke
A1  - Niethammer, Bernhard
T1  - System mit Hülle - Die innovativen Bauten der Steiff-Spielwarenfabrik in Giengen an der Brenz
JF  - In situ : Zeitschrift für Architekturgeschichte
Y1  - 2015
SN  - 1866-959X
N1  - gedruckt in der Bibliothek Bayernallee unter der Signatur 13 Z 959-2015
VL  - 7
IS  - 2
SP  - 247
EP  - 262
PB  - Wernersche Verlagsgesellschaft
CY  - Worms
ER  - 
TY  - CHAP
A1  - Fissabre, Anke
T1  - Die Augsburger Dachterrassen der Renaissance
T2  - Lutherstadt Wittenberg, Torgau und der Hausbau im 16. Jahrhundert : Bericht über die Tagung des Arbeitskreises für Hausforschung e.V. in der Lutherstadt Wittenberg vom 19.-13. Oktober 2011.
Y1  - 2015
SN  - 978-3-89445-517-0
N1  - Jahrbuch für Hausforschung ; 62
SP  - 571
EP  - 585
PB  - Jonas Verlag für Kunst und Literatur
CY  - Marburg
ER  - 
TY  - CHAP
A1  - Sirazitdinova, Y.
A1  - Dulzon, A.
A1  - Müller, Burghard
T1  - Project management practices in engineering university
T2  - 21st International Conference for Students and Young Scientists: Modern Technique and Technologies, MTT 2015; National Research Tomsk Polytechnic UniversityTomsk; Russian Federation; 5 October 2015 through 9 October 2015
Y1  - 2015
U6  - http://dx.doi.org/10.1088/1757-899X/93/1/012080
N1  - IOP Conference Series: Materials Science and Engineering
Vol. 93, Issue 1
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Duong, Minh Tuan
A1  - Staat, Manfred
T1  - Simulating beating cardiomyocytes with electromechanical coupling
T2  - II. International Conference on Biomedical Technology : 28-30 October 2015 Hannover, Germany / T. Lenarz, P. Wriggers (Eds.)
Y1  - 2015
SP  - 1
EP  - 2
ER  - 
TY  - BOOK
A1  - Esch, Thomas
T1  - Verbrennungsmotoren
Y1  - 2015
PB  - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik
CY  - Aachen
ET  - 11. Aufl., [Umdruck]
ER  - 
TY  - JOUR
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Huynh
A1  - Staat, Manfred
T1  - Physical response of hyperelastic models for composite materials and soft tissues
JF  - Asia pacific journal on computational engineering
Y1  - 2015
U6  - http://dx.doi.org/10.1186/s40540-015-0015-x
SN  - 2196-1166
VL  - 2
IS  - 3 (December 2015)
SP  - 1
EP  - 18
ER  - 
TY  - BOOK
A1  - Esch, Thomas
T1  - Experimentelle Untersuchungen an Antriebssystemen von Kraft-, Luft- und Raumfahrzeugen : Vorlesungsumdruck. 3. Aufl. Bd. 1
Y1  - 2015
PB  - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik
CY  - Aachen
ET  - 3. Aufl.
ER  - 
TY  - JOUR
A1  - Chen, Tao
A1  - Clauser, Christoph
A1  - Marquart, Gabriele
A1  - Willbrand, Karen
A1  - Mottaghy, Darius
T1  - A new upscaling method for fractured porous media
JF  - Advances in Water Resources
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.advwatres.2015.03.009
SN  - 0309-1708
N1  - Corrigendum 2019:
https://doi.org/10.1016/j.advwatres.2019.01.004
VL  - 80
SP  - 60
EP  - 68
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Kürten, Sylvia
A1  - Mottaghy, Darius
A1  - Ziegler, Martin
T1  - A new model for the description of the heat transfer for plane thermo-active geotechnical systems based on thermal resistances
JF  - Acta Geotechnica
Y1  - 2015
U6  - http://dx.doi.org/10.1007/s11440-014-0311-6
SN  - 1861-1133
VL  - 10
IS  - 2
SP  - 219
EP  - 229
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Kürten, Sylvia
A1  - Mottaghy, Darius
A1  - Ziegler, Martin
T1  - Design of plane energy geostructures based on laboratory tests and numerical modelling
JF  - Energy and Buildings
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.enbuild.2015.08.039
SN  - 0378-7788
VL  - 107
SP  - 434
EP  - 444
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Kürten, Sylvia
A1  - Mottaghy, Darius
A1  - Ziegler, Martin
T1  - Besonderheiten bei der Planung und Berechnung von oberflächennahen thermo-aktiven Bauteilen
JF  - Geotechnik
Y1  - 2015
U6  - http://dx.doi.org/10.1002/gete.201500002
SN  - 2190-6653
VL  - 38
IS  - 2
SP  - 107
EP  - 119
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Experimental and Numerical Study on Optimizing the DLN Micromix Hydrogen Combustion Principle for Industrial Gas Turbine Applications
T2  - ASME Turbo Expo 2015: Turbine Technical Conference and Exposition Volume 4A: Combustion, Fuels and Emissions Montreal, Quebec, Canada, June 15–19, 2015
Y1  - 2015
SN  - 978-0-7918-5668-0
U6  - http://dx.doi.org/10.1115/GT2015-42043
SP  - V04AT04A008
ER  - 
TY  - BOOK
A1  - Dobischat, Rolf
A1  - Witt, Gerd
A1  - Eich, Dieter
A1  - Marschall, Herbert
A1  - Thurn, Laura
A1  - Kunkel, Maximilian
A1  - Richter, Alina
A1  - Gebhardt, Andreas
T1  - 3D-Drucken in Deutschland : Entwicklungsstand, Potentiale, Herausforderungen, Auswirkungen und Perspektiven
Y1  - 2015
SN  - 978-3-8440-3479-0
N1  - Andreas Gebhardt: Hrsg.
PB  - Shaker-Verl.
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Tewari, Udit
A1  - Neshvad, Surena
A1  - Goldbach, Daniel
A1  - Sachau, Jürgen
T1  - Verification and Implementation of Pseudo-Random-Binary-Sequences for Online Determination of Grid Impedance Spectrum
T2  - International Conference on Renewable Energies and Power Quality (ICREPQ´15), La Conuna, Spain, 25th to 27th March, 2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Lopes, Pedro
A1  - Bung, Daniel B.
A1  - Leandro, Jorge
A1  - Carvalho, Rita F.
T1  - The effect of cross-waves in physical stepped spillway models
T2  - E-proceedings of the 36th IAHR World Congress ; 28 June - 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 9
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - Decision-Theoretic Planning with Linguistic Terms in Golog
T2  - FLinAl 2015 - Fuzzy Logic in Artificial Intelligence : Proceedings of the Workshop on Fuzzy Logic in AI (FLinAI-15) co-located with the 24th International Joint Conference on Artificial Intelligence (IJCAI 2015) Buenos Aires, Argentina, July 25, 2015.
Y1  - 2015
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0074-1424-4
SN  - 1613-0073
ER  - 
TY  - JOUR
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Scheja, Sabrina
A1  - Wu, Chunsheng
A1  - Keusgen, Michael
A1  - Mewes, Dieter
A1  - Schöning, Michael Josef
T1  - DNA Immobilization and Hybridization Detection by the Intrinsic Molecular Charge Using Capacitive Field-Effect Sensors Modified with a Charged Weak Polyelectrolyte Layer
JF  - Applied Materials & Interfaces
N2  - Miniaturized setup, compatibility with advanced micro- and nanotechnologies, and ability to detect biomolecules by their intrinsic molecular charge favor the semiconductor field-effect platform as one of the most attractive approaches for the development of label-free DNA chips. In this work, a capacitive field-effect EIS (electrolyte–insulator–semiconductor) sensor covered with a layer-by-layer prepared, positively charged weak polyelectrolyte layer of PAH (poly(allylamine hydrochloride)) was used for the label-free electrical detection of DNA (deoxyribonucleic acid) immobilization and hybridization. The negatively charged probe single-stranded DNA (ssDNA) molecules were electrostatically adsorbed onto the positively charged PAH layer, resulting in a preferentially flat orientation of the ssDNA molecules within the Debye length, thus yielding a reduced charge-screening effect and a higher sensor signal. Each sensor-surface modification step (PAH adsorption, probe ssDNA immobilization, hybridization with complementary target DNA (cDNA), reducing an unspecific adsorption by a blocking agent, incubation with noncomplementary DNA (ncDNA) solution) was monitored by means of capacitance–voltage and constant-capacitance measurements. In addition, the surface morphology of the PAH layer was studied by atomic force microscopy and contact-angle measurements. High hybridization signals of 34 and 43 mV were recorded in low-ionic strength solutions of 10 and 1 mM, respectively. In contrast, a small signal of 4 mV was recorded in the case of unspecific adsorption of fully mismatched ncDNA. The density of probe ssDNA and dsDNA molecules as well as the hybridization efficiency was estimated using the experimentally measured DNA immobilization and hybridization signals and a simplified double-layer capacitor model. The results of field-effect experiments were supported by fluorescence measurements, verifying the DNA-immobilization and hybridization event.
Y1  - 2015
U6  - http://dx.doi.org/10.1021/acsami.5b05146
VL  - 36
IS  - 7
SP  - 20068
EP  - 20075
PB  - American Chemical Society
CY  - Washington, DC
ER  - 
TY  - CHAP
A1  - Krückel, Kai
A1  - Nolden, Florian
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - Intuitive visual teleoperation for UGVs using free-look augmented reality displays
T2  - 2015 IEEE International Conference on Robotics and Automation (ICRA), Seattle, WA
Y1  - 2015
U6  - http://dx.doi.org/10.1109/ICRA.2015.7139809
SP  - 4412
EP  - 4417
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Reuter, Sebastian
A1  - Ewert, Daniel
A1  - Ferrein, Alexander
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
T1  - Decisive Factors for the Success of the Carologistics RoboCup Team in the RoboCup Logistics League 2014
T2  - RoboCup 2014: Robot World Cup XVIII
Y1  - 2015
SN  - 978-3-319-18615-3
N1  - Lecture Notes in Computer Science ; 8992
SP  - 155
EP  - 167
PB  - Springer
ER  - 
TY  - JOUR
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Additive manufactured mechanical disentanglement lock
JF  - RTejournal - Forum für Rapid Technologie
Y1  - 2015
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0009-2-42147
SN  - 1614-0923
VL  - 12
PB  - Fachhochschule Aachen
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Großmann, Agnes
A1  - Gabrielli, Roland Antonius
A1  - Herdrich, Georg
A1  - Fasoulas, Stefanos
A1  - Schnauffer, Peter
A1  - Middendorf, Peter
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Overview of the MultiRob 3D Lunar Industrial Development Project
T2  - Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015
Y1  - 2015
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Study of Interdigitated Electrode Arrays Using Experiments and Finite Element Models for the Evaluation of Sterilization Processes
JF  - Sensors
N2  - In this work, a sensor to evaluate sterilization processes with hydrogen peroxide vapor has been characterized. Experimental, analytical and numerical methods were applied to evaluate and study the sensor behavior. The sensor set-up is based on planar interdigitated electrodes. The interdigitated electrode structure consists of 614 electrode fingers spanning over a total sensing area of 20 mm2. Sensor measurements were conducted with and without microbiological spores as well as after an industrial sterilization protocol. The measurements were verified using an analytical expression based on a first-order elliptical integral. A model based on the finite element method with periodic boundary conditions in two dimensions was developed and utilized to validate the experimental findings.
Y1  - 2015
U6  - http://dx.doi.org/10.3390/s151026115
SN  - 1424-8220
N1  - This article belongs to the Special Issue "Gas Sensors—Designs and Applications"
VL  - 15
IS  - 10
SP  - 26115
EP  - 26127
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
A1  - Reichert, Walter
T1  - Learning to Program Mobile Robots in the ROS Summer School Series
T2  - Proceedings 6th International Conference on Robotics in Education (RiE 15)
N2  - The main objective of our ROS Summer School series is to introduce MA level students to program mobile robots with the Robot Operating System (ROS). ROS is a robot middleware that is used my many research institutions world-wide. Therefore, many state-of-the-art algorithms of mobile robotics are available in ROS and can be deployed very easily. As a basic robot platform we deploy a 1/10 RC cart that is wquipped with an Arduino micro-controller to control the servo motors, and an embedded PC that runs ROS. In two weeks, participants get to learn the basics of mobile robotics hands-on. We describe our teaching concepts and our curriculum and report on the learning success of our students.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Heuermann, Holger
A1  - Sadeghfam, Arash
T1  - Universaler Plasmajet für verschiedene Behandlungsschritte der Klebetechnik
T2  - Tagungsband / 15. Kolloquium Gemeinsame Forschung in der Klebtechnik : 3. und 4. März 2015, Maternushaus, Köln / DECHEMA
Y1  - 2015
SP  - 85
EP  - 87
CY  - Köln
ER  - 
TY  - CHAP
A1  - Gregorio, Fabrizio de
A1  - Fatigati, Giovanni
A1  - Kallweit, Stephan
T1  - Tiltrotor airframe flow field characterization by SPIV
T2  - 11th International Symposium on Partivle Image Velocimetry - PIV15 , Santa Barbara, California, Sept 14-16, 2015
Y1  - 2015
ER  - 
TY  - RPRT
A1  - Hoepner, Gert
A1  - Siers, Carsten
T1  - 7. Studie Vertriebskompass 2015/2016  / durchgeführt von der FH Aachen und der Siers & Collegen GmbH
Y1  - 2015
PB  - FH Aachen
CY  - Aachen
ER  -