TY - JOUR A1 - Staat, Manfred T1 - Local and global collapse pressure of longitudinally flawed pipes and cylindrical vessels N2 - Limit loads can be calculated with the finite element method (FEM) for any component, defect geometry, and loading. FEM suggests that published long crack limit formulae for axial defects under-estimate the burst pressure for internal surface defects in thick pipes while limit loads are not conservative for deep cracks and for pressure loaded crack-faces. Very deep cracks have a residual strength, which is modelled by a global collapse load. These observations are combined to derive new analytical local and global collapse loads. The global collapse loads are close to FEM limit analyses for all crack dimensions. KW - Finite-Elemente-Methode KW - Grenzwertberechnung KW - Axialbelastung KW - FEM KW - Grenzwertberechnung KW - Axialbelastung KW - Traglastanalyse KW - Limit analysis KW - Global and local collapse KW - Axially cracked pipe KW - Pressure loaded crack-face Y1 - 2005 ER - TY - JOUR A1 - Staat, Manfred T1 - Direct finite element route for design-by-analysis of pressure components N2 - In the new European standard for unfired pressure vessels, EN 13445-3, there are two approaches for carrying out a Design-by-Analysis that cover both the stress categorization method (Annex C) and the direct route method (Annex B) for a check against global plastic deformation and against progressive plastic deformation. This paper presents the direct route in the language of limit and shakedown analysis. This approach leads to an optimization problem. Its solution with Finite Element Analysis is demonstrated for mechanical and thermal actions. One observation from the examples is that the so-called 3f (3Sm) criterion fails to be a reliable check against progressive plastic deformation. Precise conditions are given, which greatly restrict the applicability of the 3f criterion. KW - Einspielen KW - Plastizität KW - Deformation KW - Analytischer Zulaessigkeitsnachweis KW - Einspiel-Analyse KW - fortschreitende plastische Deformation KW - alternierend Verformbarkeit KW - Einspiel-Kriterium KW - Design-by-analysis KW - Shakedown analysis KW - Progressive plastic deformation KW - Alternating plasticity KW - Shakedown criterion Y1 - 2005 ER - TY - JOUR A1 - Staat, Manfred T1 - Shakedown and ratchetting under tension-torsion loadings: analysis and experiments N2 - Structural design analyses are conducted with the aim of verifying the exclusion of ratchetting. To this end it is important to make a clear distinction between the shakedown range and the ratchetting range. The performed experiment comprised a hollow tension specimen which was subjected to alternating axial forces, superimposed with constant moments. First, a series of uniaxial tests has been carried out in order to calibrate a bounded kinematic hardening rule. The load parameters have been selected on the basis of previous shakedown analyses with the PERMAS code using a kinematic hardening material model. It is shown that this shakedown analysis gives reasonable agreement between the experimental and the numerical results. A linear and a nonlinear kinematic hardening model of two-surface plasticity are compared in material shakedown analysis. KW - Einspielen KW - Einspielen KW - Ratchetting KW - Zug-Druck Belastung KW - shakedown KW - ratchetting KW - tension–torsion loading Y1 - 2003 ER - TY - JOUR A1 - Staat, Manfred T1 - Basis Reduction for the Shakedown Problem for Bounded Kinematic Hardening Material N2 - Limit and shakedown analysis are effective methods for assessing the load carrying capacity of a given structure. The elasto–plastic behavior of the structure subjected to loads varying in a given load domain is characterized by the shakedown load factor, defined as the maximum factor which satisfies the sufficient conditions stated in the corresponding static shakedown theorem. The finite element dicretization of the problem may lead to very large convex optimization. For the effective solution a basis reduction method has been developed that makes use of the special problem structure for perfectly plastic material. The paper proposes a modified basis reduction method for direct application to the two-surface plasticity model of bounded kinematic hardening material. The considered numerical examples show an enlargement of the load carrying capacity due to bounded hardening. KW - Finite-Elemente-Methode KW - Einspielen KW - Basis Reduktion KW - konvexe Optimierung KW - FEM KW - Druckgeräte KW - Basis reduction KW - Convex optimization KW - FEM KW - Shakedown analysis Y1 - 2000 ER - TY - CHAP A1 - Staat, Manfred T1 - Design by Analysis of Pressure Components by non-linear Optimization N2 - This paper presents the direct route to Design by Analysis (DBA) of the new European pressure vessel standard in the language of limit and shakedown analysis (LISA). This approach leads to an optimization problem. Its solution with Finite Element Analysis is demonstrated for some examples from the DBA-Manual. One observation from the examples is, that the optimisation approach gives reliable and close lower bound solutions leading to simple and optimised design decision. KW - Analytischer Zulaessigkeitsnachweis KW - FEM KW - Einspiel-Analyse KW - design-by-analysis KW - finite element analysis KW - limit and shakedown analysis Y1 - 2003 ER - TY - JOUR A1 - Staat, Manfred T1 - LISA - a European project for FEM-based limit and shakedown analysis N2 - The load-carrying capacity or the safety against plastic limit states are the central questions in the design of structures and passive components in the apparatus engineering. A precise answer is most simply given by limit and shakedown analysis. These methods can be based on static and kinematic theorems for lower and upper bound analysis. Both may be formulated as optimization problems for finite element discretizations of structures. The problems of large-scale analysis and the extension towards realistic material modelling will be solved in a European research project. Limit and shakedown analyses are briefly demonstrated with illustrative examples. KW - Einspielen KW - Traglast KW - Finite-Elemente-Methode KW - Traglastanalyse KW - Einspielanalyse KW - FEM KW - limit analysis KW - shakedown analysis Y1 - 2001 ER - TY - CHAP A1 - Fabo, Sabine T1 - Audio-visual hybrids : between immersion and detachment N2 - Close interrelations between sound and image are not a mere phenomenon of today’s multimedia technology. The idea of the synthesis of different media lies at the core of the concept of the Gesamtkunstwerk in the second half of the 19th century and it can also be traced back to the synaesthesia debate at the beginning of the 20th century [...]. KW - Elektronische Kunst KW - Klangkunst KW - Hybride Kunst KW - Medienkunst KW - Hybrid Art KW - Sound Art KW - Audio-visual Art Y1 - 2004 ER - TY - CHAP A1 - Poghossian, Arshak A1 - Schumacher, Kerstin A1 - Kloock, Joachim P. A1 - Rosenkranz, Christian A1 - Schultze, Joachim W. A1 - Müller-Veggian, Mattea A1 - Schöning, Michael Josef T1 - Functional testing and characterisation of ISFETs on wafer level by means of a micro-droplet cell N2 - A wafer-level functionality testing and characterisation system for ISFETs (ionsensitive field-effect transistor) is realised by means of integration of a specifically designed capillary electrochemical micro-droplet cell into a commercial wafer prober-station. The developed system allows the identification and selection of “good” ISFETs at the earliest stage and to avoid expensive bonding, encapsulation and packaging processes for nonfunctioning ISFETs and thus, to decrease costs, which are wasted for bad dies. The developed system is also feasible for wafer-level characterisation of ISFETs in terms of sensitivity, hysteresis and response time. Additionally, the system might be also utilised for wafer-level testing of further electrochemical sensors. KW - Biosensor KW - Biosensorik KW - ISFET KW - Wafer KW - ISFET KW - wafer-level testing KW - capillary micro-droplet cell Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1259 ER - TY - CHAP A1 - Wagner, Torsten A1 - Schöning, Michael Josef T1 - Preface of the Special Issue of I3S 2005 in Jülich (Germany) N2 - International Symposium on Sensor Science, I3S 2005 <3; 2005; Juelich, Germany> In: Sensors 2006, 6, 260-261 ISSN 1424-8220 KW - Biosensor KW - I3S 2005 KW - International Symposium on Sensor Science Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1365 ER - TY - CHAP A1 - Srivastava, Alok A1 - Singh, Virendra A1 - Dhand, Chetna A1 - Kaur, Manindar A1 - Singh, Tejvir A1 - Witte, Katrin A1 - Scherer, Ulrich W. T1 - Study of swift heavy ion modified conduction polymer composites for application as gas sensor N2 - A polyaniline-based conducting composite was prepared by oxidative polymerisation of aniline in a polyvinylchloride (PVC) matrix. The coherent free standing thin films of the composite were prepared by a solution casting method. The polyvinyl chloride-polyaniline composites exposed to 120 MeV ions of silicon with total ion fluence ranging from 1011 to 1013 ions/cm2, were observed to be more sensitive towards ammonia gas than the unirradiated composite. The response time of the irradiated composites was observed to be comparably shorter. We report for the first time the application of swift heavy ion modified insulating polymer conducting polymer (IPCP) composites for sensing of ammonia gas. KW - Biosensor KW - Conducing polymer KW - ammonia gas sensors KW - swift heavy ions KW - polymer composites Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1345 ER - TY - CHAP A1 - Chaiyboun, Ali A1 - Traute, Rüdiger A1 - Kiesewetter, Olaf A1 - Ahlers, Simon A1 - Müller, Gerhard A1 - Doll, Theodor T1 - Modular analytical multicomponent analysis in gas sensor arrays N2 - A multi-sensor system is a chemical sensor system which quantitatively and qualitatively records gases with a combination of cross-sensitive gas sensor arrays and pattern recognition software. This paper addresses the issue of data analysis for identification of gases in a gas sensor array. We introduce a software tool for gas sensor array configuration and simulation. It concerns thereby about a modular software package for the acquisition of data of different sensors. A signal evaluation algorithm referred to as matrix method was used specifically for the software tool. This matrix method computes the gas concentrations from the signals of a sensor array. The software tool was used for the simulation of an array of five sensors to determine gas concentration of CH4, NH3, H2, CO and C2H5OH. The results of the present simulated sensor array indicate that the software tool is capable of the following: (a) identify a gas independently of its concentration; (b) estimate the concentration of the gas, even if the system was not previously exposed to this concentration; (c) tell when a gas concentration exceeds a certain value. A gas sensor data base was build for the configuration of the software. With the data base one can create, generate and manage scenarios and source files for the simulation. With the gas sensor data base and the simulation software an on-line Web-based version was developed, with which the user can configure and simulate sensor arrays on-line. KW - Biosensor KW - Main sensitivity KW - cross sensitivity KW - matrix method KW - gas sensor array KW - modelling Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1358 ER - TY - CHAP A1 - Sakthivel, Mariappan A1 - Weppner, Werner T1 - Response behaviour of a hydrogen sensor based on ionic conducting polymer-metal interfaces prepared by the chemical reduction method N2 - A solid-state amperometric hydrogen sensor based on a protonated Nafion membrane and catalytic active electrode operating at room temperature was fabricated and tested. Ionic conducting polymer-metal electrode interfaces were prepared chemically by using the impregnation-reduction method. The polymer membrane was impregnated with tetra-ammine platinum chloride hydrate and the metal ions were subsequently reduced by using either sodium tetrahydroborate or potassium tetrahydroborate. The hydrogen sensing characteristics with air as reference gas is reported. The sensors were capable of detecting hydrogen concentrations from 10 ppm to 10% in nitrogen. The response time was in the range of 10-30 s and a stable linear current output was observed. The thin Pt films were characterized by XRD, Infrared Spectroscopy, Optical Microscopy, Atomic Force Microscopy, Scanning Electron Microscopy and EDAX. KW - Biosensor KW - Hydrogen sensor KW - amperometric sensor KW - porous Pt electrode KW - chemical reduction method Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1399 ER - TY - CHAP A1 - Koplin, Tobias J. A1 - Siemons, Maike A1 - Océn-Valéntin, César A1 - Sanders, Daniel A1 - Simon, Ulrich T1 - Workflow for high throughput screening of gas sensing materials N2 - The workflow of a high throughput screening setup for the rapid identification of new and improved sensor materials is presented. The polyol method was applied to prepare nanoparticular metal oxides as base materials, which were functionalised by surface doping. Using multi-electrode substrates and high throughput impedance spectroscopy (HT-IS) a wide range of materials could be screened in a short time. Applying HT-IS in search of new selective gas sensing materials a NO2-tolerant NO sensing material with reduced sensitivities towards other test gases was identified based on iridium doped zinc oxide. Analogous behaviour was observed for iridium doped indium oxide. KW - Biosensor KW - High throughput experimentation KW - gas sensor KW - metal oxide KW - doping KW - impedance spectroscopy KW - nitrogen oxides Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1407 ER - TY - CHAP A1 - Spannhake, Jan A1 - Schulz, Olaf A1 - Helwig, Andreas A1 - Krenkow, Angelika A1 - Müller, Gerhard A1 - Doll, Theodor T1 - High-temperature MEMS heater platforms: long-term performance of metal and semiconductor heater materials N2 - Micromachined thermal heater platforms offer low electrical power consumption and high modulation speed, i.e. properties which are advantageous for realizing nondispersive infrared (NDIR) gas- and liquid monitoring systems. In this paper, we report on investigations on silicon-on-insulator (SOI) based infrared (IR) emitter devices heated by employing different kinds of metallic and semiconductor heater materials. Our results clearly reveal the superior high-temperature performance of semiconductor over metallic heater materials. Long-term stable emitter operation in the vicinity of 1300 K could be attained using heavily antimony-doped tin dioxide (SnO2:Sb) heater elements. KW - Biosensor KW - Hotplate KW - heater metallisation KW - high-temperature stability KW - electro-migration KW - doped silicon KW - doped metal oxide KW - antimony doped tin oxide Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1513 ER - TY - CHAP A1 - Katz, Eugenii A1 - Willner, Itamar T1 - Magneto-controlled quantized electron transfer to surface-confined redox units and metal nanoparticles N2 - Hydrophobic magnetic nanoparticles (NPs) consisting of undecanoate-capped magnetite (Fe3O4, average diameter ca. 5 nm) are used to control quantized electron transfer to surface-confined redox units and metal NPs. A two-phase system consisting of an aqueous electrolyte solution and a toluene phase that includes the suspended undecanoatecapped magnetic NPs is used to control the interfacial properties of the electrode surface. The attracted magnetic NPs form a hydrophobic layer on the electrode surface resulting in the change of the mechanisms of the surface-confined electrochemical processes. A quinone-monolayer modified Au electrode demonstrates an aqueous-type of the electrochemical process (2e-+2H+ redox mechanism) for the quinone units in the absence of the hydrophobic magnetic NPs, while the attraction of the magnetic NPs to the surface results in the stepwise single-electron transfer mechanism characteristic of a dry nonaqueous medium. Also, the attraction of the hydrophobic magnetic NPs to the Au electrode surface modified with Au NPs (ca. 1.4 nm) yields a microenvironment with a low dielectric constant that results in the single-electron quantum charging of the Au NPs. KW - Biosensor KW - Nanoparticles KW - magnetic particles KW - quantum charging KW - modified electrode Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1528 ER - TY - CHAP A1 - Pijanowska, Dorota G. A1 - Remiszewska, Elzbieta T1 - pH-based detection of phenylalnine by potentiometric and colorimetric methods N2 - In this paper, methods of sample preparation for potentiometric measurement of phenylalanine are presented. Basing on the spectrophotometric measurements of phenylalanine, the concentrations of reagents of the enzymatic reaction (10 mM L-Phe, 0,4 mM NAD+, 2U L-PheDH) were determined. Then, the absorption spectrum of the reaction product, NADH, was monitored (maximum peak at 340 nm). The results obtained by the spectrophotometric method were compared with the results obtained by the colourimetry, using pH indicators. The above-mentioned two methods will be used as references for potentiometric measurements of phenylalanine concentration. KW - Biosensor KW - Phenylalanine determination KW - enzymatic methods KW - pH-based biosensing Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1536 ER - TY - CHAP A1 - Arida, Hassan A. A1 - Kloock, Joachim P. A1 - Schöning, Michael Josef T1 - Novel organic membrane-based thin-film microsensors for the determination of heavy metal cations N2 - A first step towards the fabrication and electrochemical evaluation of thin-film microsensors based on organic PVC membranes for the determination of Hg(II), Cd(II), Pb(II) and Cu(II) ions in solutions has been realised. The membrane-coating mixture used in the preparation of this new type of microsensors is incorporating PVC as supporting matrix, o-nitrophenyloctylether (o-NPOE) as solvent mediator and a recently synthesized Hg[dimethylglyoxime(phene)]2+ and Bis-(4-hydroxyacetophenone)-ethylenediamine as electroactive materials for Hg(II) and Cd(II), respectively. A set of three commercialised ionophores for Cd(II), Pb(II) and Cu(II) has been also used for comparison. Thin-film microsensors based on these membranes showed a Nernstian response of slope (26-30 mV/dec.) for the respective tested cations. The potentiometric response characteristics (linear range, pH range, detection limit and response time) are comparable with those obtained by conventional membranes as well as coated wire electrodes prepared from the same membrane. The realisation of the new organic membrane-based thin-film microsensors overcomes the problem of an insufficient selectivity of solid-state-based thinfilm sensors. KW - Biosensor KW - Heavy metal detection KW - thin-film microsensors KW - organic PVC membranes Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1545 ER - TY - CHAP A1 - Barek, Jiri A1 - Fischer, Jan A1 - Navratil, Tomas A1 - Peckova, Karolina A1 - Yosypchuk, Bogdan T1 - Silver solid amalgam electrodes as sensors for chemical carcinogens N2 - The applicability of differential pulse voltammetry (DPV) and adsorptive stripping voltammetry (AdSV) at a non-toxic meniscus-modified silver solid amalgam electrode (m-AgSAE) for the determination of trace amounts of genotoxic substances was demonstrated on the determination of micromolar and submicromolar concentrations of 3-nitrofluoranthene using methanol - 0.01 mol L-1 NaOH (9:1) mixture as a base electrolyte and of Ostazine Orange using 0.01 mol L-1 NaOH as a base electrolyte. KW - Biosensor KW - Solid amalgam electrodes KW - voltammetry KW - carcinogens KW - 3-nitrofluoranthene KW - Ostazine Orange Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1554 ER - TY - CHAP A1 - Baronas, Romas A1 - Ivanauskas, Feliksas A1 - Kulys, Juozas T1 - Mathematical modeling of biosensors based on an array of enzyme microreactors N2 - This paper presents a two-dimensional-in-space mathematical model of biosensors based on an array of enzyme microreactors immobilised on a single electrode. The modeling system acts under amperometric conditions. The microreactors were modeled by particles and by strips. The model is based on the diffusion equations containing a nonlinear term related to the Michaelis-Menten kinetics of the enzymatic reaction. The model involves three regions: an array of enzyme microreactors where enzyme reaction as well as mass transport by diffusion takes place, a diffusion limiting region where only the diffusion takes place, and a convective region, where the analyte concentration is maintained constant. Using computer simulation, the influence of the geometry of the microreactors and of the diffusion region on the biosensor response was investigated. The digital simulation was carried out using the finite difference technique. KW - Biosensor KW - Reaction-diffusion KW - modeling biosensor KW - microreactor Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1569 ER - TY - CHAP A1 - Lei, Yu A1 - Mulchandani, Priti A1 - Chen, Wilfred A1 - Mulchandani, Ashok T1 - Biosensor for direct determination of fenitrothion and EPN using recombinant Pseudomonas putida JS444 with surface expressed organophosphorus hydrolase. 1. modified clark oxygen electrode N2 - This paper reports a first microbial biosensor for rapid and cost-effective determination of organophosphorus pesticides fenitrothion and EPN. The biosensor consisted of recombinant PNP-degrading/oxidizing bacteria Pseudomonas putida JS444 anchoring and displaying organophosphorus hydrolase (OPH) on its cell surface as biological sensing element and a dissolved oxygen electrode as the transducer. Surfaceexpressed OPH catalyzed the hydrolysis of fenitrothion and EPN to release 3-methyl-4-nitrophenol and p-nitrophenol, respectively, which were oxidized by the enzymatic machinery of Pseudomonas putida JS444 to carbon dioxide while consuming oxygen, which was measured and correlated to the concentration of organophosphates. Under the optimum operating conditions, the biosensor was able to measure as low as 277 ppb of fenitrothion and 1.6 ppm of EPN without interference from phenolic compounds and other commonly used pesticides such as carbamate pesticides, triazine herbicides and organophosphate pesticides without nitrophenyl substituent. The applicability of the biosensor to lake water was also demonstrated. KW - Biosensor KW - Organophosphorus KW - fenitrothion KW - EPN KW - biosensor KW - Pseudomonas putida Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1573 ER - TY - CHAP A1 - Näther, Niko A1 - Juárez, Leon M. A1 - Emmerich, Rüdiger A1 - Berger, Jörg A1 - Friedrich, Peter A1 - Schöning, Michael Josef T1 - Detection of hydrogen peroxide (H2O2) at exposed temperatures for industrial processes N2 - An H2O2 sensor for the application in industrial sterilisation processes has been developed. Therefore, automated sterilisation equipment at laboratory scale has been constructed using parts from industrial sterilisation facilities. In addition, a software tool has been developed for the control of the sterilisation equipment at laboratory scale. First measurements with the developed sensor set-up as part of the sterilisation equipment have been performed and the sensor has been physically characterised by optical microscopy and SEM. KW - Biosensor KW - Gas sensor KW - hydrogen peroxide KW - sterilisation KW - catalytic decomposition Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1418 ER - TY - CHAP A1 - Wagner, Thorsten A1 - Kohl, Claus-Dieter A1 - Fröba, Michael A1 - Tiemann, Michael T1 - Gas sensing properties of ordered mesoporous SnO2 N2 - We report on the synthesis and CO gas-sensing properties of mesoporous tin(IV) oxides (SnO2). For the synthesis cetyltrimethylammonium bromide (CTABr) was used as a structure-directing agent; the resulting SnO2 powders were applied as films to commercially available sensor substrates by drop coating. Nitrogen physisorption shows specific surface areas up to 160 m2·g-1 and mean pore diameters of about 4 nm, as verified by TEM. The film conductance was measured in dependence on the CO concentration in humid synthetic air at a constant temperature of 300 °C. The sensors show a high sensitivity at low CO concentrations and turn out to be largely insensitive towards changes in the relative humidity. We compare the materials with commercially available SnO2-based sensors. KW - Biosensor KW - Tin oxide KW - sensing properties KW - CO KW - humidity Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1422 ER - TY - CHAP A1 - Mirmohseni, Abdolreza A1 - Rostamizadeh, Kobra T1 - Quartz crystal nanobalance in conjunction with principal component analysis for identification of volatile organic compounds N2 - Quartz crystal nanobalance (QCN) sensors are considered as powerful masssensitive sensors to determine materials in the sub-nanogram level. In this study, a single piezoelectric quartz crystal nanobalance modified with polystyrene was employed to detect benzene, toluene, ethylbenzene and xylene (BTEX compounds). The frequency shift of the QCN sensor was found to be linear against the BTEX compound concentrations in the range about 1-45 mg l-1. The correlation coefficients for benzene, toluene, ethylbenzene, and xylene were 0.991, 0.9977, 0.9946 and 0.9971, respectively. The principal component analysis was also utilized to process the frequency response data of the single piezoelectric crystal at different times, considering to the different adsorption-desorption dynamics of BTEX compounds. Using principal component analysis, it was found that over 90% of the data variance could still be explained by use of two principal components (PC1 and PC2). Subsequently, the successful identification of benzene and toluene was possible through the principal component analysis of the transient responses of the polystyrene modified QCN sensor. The results showed that the polystyrene-modified QCN had favorable identification and quantification performances for the BTEX compounds. KW - Biosensor KW - Quartz crystal nanobalance (QCN) KW - BTEX compounds KW - principal component Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1434 ER - TY - CHAP A1 - Kreutz, Christian A1 - Lörgen, Jürgen A1 - Graewe, Boris A1 - Bargon, Joachim A1 - Yoshida, Mayumi A1 - Freso, Zachary M. A1 - Frèchet, Jean M. J. T1 - High frequency quartz micro balances: a promising path to enhanced sensitivity of gravimetric sensors N2 - An array of 50 MHz quartz microbalances (QMBs) coated with a dendronized polymer was used to detect small amounts of volatile organic compounds (VOCs) in the gas phase. The results were compared to those obtained with the commonly used 10 MHz QMBs. The 50 MHz QMBs proved to be a powerful tool for the detection of VOCs in the gas phase; therefore, they represent a promising alternative to the much more delicate surface acoustic wave devices (SAWs). KW - Biosensor KW - Quartz micro balances KW - electronic noses dendronized polymers inverted mesa technology Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1445 ER - TY - CHAP A1 - Rabner, Arthur A1 - Shacham, Yosi T1 - A concept for a sensitive micro total analysis system for high throughput fluorescence imaging N2 - This paper discusses possible methods for on-chip fluorescent imaging for integrated bio-sensors. The integration of optical and electro-optical accessories, according to suggested methods, can improve the performance of fluorescence imaging. It can boost the signal to background ratio by a few orders of magnitudes in comparison to conventional discrete setups. The methods that are present in this paper are oriented towards building reproducible arrays for high-throughput micro total analysis systems (µTAS). The first method relates to side illumination of the fluorescent material placed into microcompartments of the lab-on-chip. Its significance is in high utilization of excitation energy for low concentration of fluorescent material. The utilization of a transparent µLED chip, for the second method, allows the placement of the excitation light sources on the same optical axis with emission detector, such that the excitation and emission rays are directed controversly. The third method presents a spatial filtering of the excitation background. KW - Biosensor KW - Fluorescence KW - imaging KW - lab-on-chip KW - fluidic KW - lenslet array KW - LED chip KW - image sensor KW - biosensor Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1456 ER - TY - CHAP A1 - Förster, Arnold A1 - Stock, Jürgen A1 - Montanari, Simone A1 - Lepsa, Mihail Ion A1 - Lüth, Hans T1 - Fabrication and characterisation of GaAs Gunn Diode Chips for applications at 77 GHz in automotive industry N2 - GaAs-based Gunn diodes with graded AlGaAs hot electron injector heterostructures have been developed under the special needs in automotive applications. The fabrication of the Gunn diode chips was based on total substrate removal and processing of integrated Au heat sinks. Especially, the thermal and RF behavior of the diodes have been analyzed by DC, impedance and S-parameter measurements. The electrical investigations have revealed the functionality of the hot electron injector. An optimized layer structure could fulfill the requirements in adaptive cruise control (ACC) systems at 77 GHz with typical output power between 50 and 90 mW. KW - Biosensor KW - Gunn diode KW - microwave generation KW - GaAs hot electron injector Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1462 ER - TY - CHAP A1 - Platen, Johannes A1 - Poghossian, Arshak A1 - Schöning, Michael Josef T1 - Microstructured Nanostructures – nanostructuring by means of conventional photolithography and layer-expansion technique N2 - A new and simple method for nanostructuring using conventional photolithography and layer expansion or pattern-size reduction technique is presented, which can further be applied for the fabrication of different nanostructures and nano-devices. The method is based on the conversion of a photolithographically patterned metal layer to a metal-oxide mask with improved pattern-size resolution using thermal oxidation. With this technique, the pattern size can be scaled down to several nanometer dimensions. The proposed method is experimentally demonstrated by preparing nanostructures with different configurations and layouts, like circles, rectangles, trapezoids, “fluidic-channel”-, “cantilever”- and meander-type structures. KW - Biosensor KW - Nanostructuring KW - layer expansion KW - pattern-size reduction KW - self-aligned patterning Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1477 ER - TY - CHAP A1 - Pijanowska, Dorota G. A1 - Remiszewska, Elzbieta A1 - Pederzolli, Cecilia A1 - Lunelli, Lorenzo A1 - Vendano, Michele A1 - Canteri, Roberto A1 - Dudzinski, Konrad A1 - Kruk, Jerzy A1 - Torbicz, Wladyslaw T1 - Surface modification for microreactor fabrication N2 - In this paper, methods of surface modification of different supports, i.e. glass and polymeric beads for enzyme immobilisation are described. The developed method of enzyme immobilisation is based on Schiff’s base formation between the amino groups on the enzyme surface and the aldehyde groups on the chemically modified surface of the supports. The surface of silicon modified by APTS and GOPS with immobilised enzyme was characterised by atomic force microscopy (AFM), time-of-flight secondary ion mass spectroscopy (ToF-SIMS) and infrared spectroscopy (FTIR). The supports with immobilised enzyme (urease) were also tested in combination with microreactors fabricated in silicon and Perspex, operating in a flow-through system. For microreactors filled with urease immobilised on glass beads (Sigma) and on polymeric beads (PAN), a very high and stable signal (pH change) was obtained. The developed method of urease immobilisation can be stated to be very effective. KW - Biosensor KW - Microreactors KW - surface modification KW - enzyme immobilisation KW - lab-on-a-chip Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1480 ER - TY - CHAP A1 - Bukhari, Syed Faisal Ahmed A1 - Yang, Wuqiang T1 - Multi-interface level sensors and new development in monitoring and control of oil separators N2 - In the oil industry, huge saving may be made if suitable multi-interface level measurement systems are employed for effectively monitoring crude oil separators and efficient control of their operation. A number of techniques, e.g. externally mounted displacers, differential pressure transmitters and capacitance rod devices, have been developed to measure the separation process with gas, oil, water and other components. Because of the unavailability of suitable multi-interface level measurement systems, oil separators are currently operated by the trial-and-error approach. In this paper some conventional techniques, which have been used for level measurement in industry, and new development are discussed. KW - Biosensor KW - Level sensor KW - multi-interface measurement KW - electrical capacitance tomography KW - ECT Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1498 ER - TY - CHAP A1 - Tymecki, Lukasz A1 - Glab, Stanislaw A1 - Koncki, Robert T1 - Miniaturized, planar ion-selective electrodes fabricated by means of thick-film technology N2 - Various planar technologies are employed for developing solid-state sensors having low cost, small size and high reproducibility; thin- and thick-film technologies are most suitable for such productions. Screen-printing is especially suitable due to its simplicity, low-cost, high reproducibility and efficiency in large-scale production. This technology enables the deposition of a thick layer and allows precise pattern control. Moreover, this is a highly economic technology, saving large amounts of the used inks. In the course of repetitions of the film-deposition procedure there is no waste of material due to additivity of this thick-film technology. Finally, the thick films can be easily and quickly deposited on inexpensive substrates. In this contribution, thick-film ion-selective electrodes based on ionophores as well as crystalline ion-selective materials dedicated for potentiometric measurements are demonstrated. Analytical parameters of these sensors are comparable with those reported for conventional potentiometric electrodes. All mentioned thick-film strip electrodes have been totally fabricated in only one, fully automated thickfilm technology, without any additional manual, chemical or electrochemical steps. In all cases simple, inexpensive, commercially available materials, i.e. flexible, plastic substrates and easily cured polymer-based pastes were used. KW - Biosensor KW - Potentiometry KW - thick-film technology KW - screen-printing KW - ion-selective electrodes Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1506 ER - TY - CHAP A1 - Brüssermann, Klaus T1 - Platform of Excellence in "Energy and Environment" N2 - The Ministry of Science and Research in North Rhine-Westphalia created eight platforms of excellence, one in the research area „Energy and Environment“ in 2002 at ACUAS. This platform concentrates the research and development of 13 professors in Jülich and Aachen and of two scientific institutes with different topics: – NOWUM-Energy with emphasis on efficient and economic energy conversion – The Solar Institute Jülich – SIJ – being the largest research institute in the field of renewables at a University of Applied Sciences in Germany With this platform each possible energy conversion – nuclear, fossil, renewable- can be dealt with to help solving the two most important problems of mankind, energy and potable water. At the CSE are presented the historical development, some research results and the combined master studies in „Energy Systems“ and „Nuclear Applications“ KW - Energietechnik KW - Kernenergie KW - Umwelt KW - Energy KW - environment KW - Energy Systems KW - Nuclear Applications Y1 - 2005 ER - TY - BOOK A1 - Schürmann, Wilhelm T1 - Song of joy : Kippenberger, Schürmann [Martin Kippenberger - gemalte Bilder ; Wilhelm Schürmann - fotografierte Bilder] Y1 - 1983 N1 - Ausstellung der Neuen Galerie, Sammlung Ludwig, Aachen (10. Juni 1983 - 24. Juli 1983) PB - Neue Galerie CY - Aachen ER - TY - JOUR A1 - Gebhardt, Andreas T1 - Rapid Prototyping JF - Landolt-Börnstein - Group VIII Advanced Materials and Technologies‡Vol. 1 Laser Physics and Applications‡Subvol. C Laser Applications / authors: Bäuerle, D. ... Y1 - 2004 SN - 3-540-00105-0 SP - 105 EP - 123 PB - Heidelberg CY - Springer ER - TY - JOUR A1 - Jacobs, Stephan A1 - Hermanns, Oliver T1 - Cooperative Design: Requirements on Network Technology and Document Architecture JF - Selected papers of the 6th Joint European Networking Conference / guest ed.: J. Barberá Y1 - 1996 N1 - Joint European Networking Conference <6, 1995, Tel Aviv>; Computer networks and ISDN systems ; 28,4 : special issue PB - Elsevier CY - Amsterdam [u.a.] ER - TY - BOOK A1 - Jacobs, Stephan A1 - Jarke, Matthias T1 - Requirements information management : the NATURE approach / RWTH Aachen, Fachgruppe Informatik. M. Jarke Y1 - 1994 N1 - Aachener Informatik-Berichte ; 94-24 PB - RWTH, Fachgruppe Informatik CY - Aachen ER - TY - JOUR A1 - Jacobs, Stephan A1 - Jarke, Matthias A1 - Pohl, Klaus T1 - Requirements Engineering 1993 JF - Automated software engineering : the international journal of automated reasoning and artificial intelligence in software engineering. Vol. 1 (1994), H. No. 1 Y1 - 1994 SN - 0928-8910 ER - TY - JOUR A1 - Jacobs, Stephan A1 - Grob, Robert A1 - Kethers, Stefanie T1 - Towards CIS in Quality Management - Integration of Agents and Methods / Robert Grob, Stephan Jacobs, Stefanie Kethers JF - Proceedings of the Second International Conference on Cooperative Information Systems : May 17 - 20, 1994, Toronto, Canada / sponsored by the University of Toronto. Editors: Michael Brodie Y1 - 1994 N1 - International Conference on Cooperative Information Systems ; (2 : ; 1994.05.17-20 : ; Toronto) PB - University of Toronto Press CY - Toronto ER - TY - JOUR A1 - Jacobs, Stephan T1 - A Fault Diagnosis System Using Temporary Relations between Symptoms JF - Operations research '93 : extended abstracts of the 18th Symposium on Operations Research held at the University of Cologne, September 1 - 3, 1993 / Achim Bachem ... (ed.) Y1 - 1994 SN - 379080794X N1 - Symposium on Operations Research ; (18, 1993, Köln) PB - Physica-Verl. CY - Heidelberg ER - TY - JOUR A1 - Jacobs, Stephan A1 - Jarke, Matthias A1 - Pohl, Klaus A1 - Bubenko, Janis T1 - Requirements Engineering : An Integrated View of Representations, Process, and Domain / Jarke, Matthias ; Pohl, Klaus ; Jacobs, Stephan ; Bubenko, Janis ... JF - Software engineering : 4th European Software Engineering Conference Garmisch-Partenkirchen, Germany, September 13 - 17, 1993 ; proceedings / ESEC '93. Ian Sommerville ... (eds.) Y1 - 1993 SN - 3-540-57209-0 N1 - ESEC (4, 1993, Garmisch-Partenkirchen); Lecture notes in computer science ; 717 SP - 100 EP - 114 PB - Springer CY - Berlin [u.a.] ER - TY - JOUR A1 - Jacobs, Stephan A1 - Quernheim, Ulrich A1 - Aghadavoodi Jolfaei, Masoud T1 - Performance Evalutation of three Access Protocols for VSAT Networks / Ulrich Quernheim, Stephan Jacobs, Masoud Aghadavoodi Jolfaei JF - Proceedings of the second European Conference on Satellite Communications : ECSC-2 ; Palais de Congrès, Liège, Belgium, 22 - 24 October 1991 / [ed.: Brigitte Kaldeich] Y1 - 1991 SN - 92-9092-170-6 N1 - European Conference on Satellite Communications <2, 1991, Liège>; ESA SP ; 332 PB - ESA Publ. Div. CY - Noordwijk ER - TY - JOUR A1 - Jacobs, Stephan A1 - Quernheim, Ulrich T1 - ARQ Error Control for Multipoint Satellite Communications / Ulrich Quernheim, Stephan Jacobs JF - Computer networking : proceedings of the IFIP TC 6 Conference on Computer Networking, COMNET '90, Budapest, Hungary, 8-10 May, 1990 / edited by László Csaba, Tibor Szentiványi, Katie Tarnay Y1 - 1990 SN - 0444888721 N1 - International Federation for Information Processing ; COMNET ; (1990, Budapest) PB - Elsevier CY - New York, N.Y. ER - TY - JOUR A1 - Grap, Rolf Dietmar T1 - Determining manpower requirements in a spinning mill JF - Chemical fibers international : CFI ; fiber polymers, fibers, texturing, and spunbonds (2003) Y1 - 2003 SN - 0340-3343 SP - 455 EP - 458 ER - TY - JOUR A1 - Jacobs, Stephan T1 - Introducing Measurable Requirements: A Case Study JF - Proceedings : June 7 - 11, 1999, University of Limerick, Limerick, Ireland / sponsored by IEEE Computer Society Technical Council on Software Engineering. In cooperation with ACM SIGSOFT Y1 - 1999 SN - 0769501885 N1 - International Symposium on Requirements Engineering ; (4, 1999, Limerick) ER - TY - JOUR A1 - Gebhardt, Michael A1 - Jarke, Matthias A1 - Jacobs, Stephan T1 - A Toolkit for Negotiation Support Interfaces to Multidimensional Data JF - SIGMOD 1997 : proceedings ACM SIGMOD International Conference on Management of Data, May 13 - 15, 1997, Tucson, Arizona, USA / ed. by Joan M. Peckman Y1 - 1997 SN - 0897919114 N1 - International Conference on Management of Data ; (1997, Tucson, Ariz.) PB - ACM Press CY - New York, NY ER - TY - JOUR A1 - Jacobs, Stephan A1 - Gebhardt, Michael T1 - Conflict Management in Design / JF - Transactions from the Eighth Symposium on Quality Function Deployment : (concurrent with International Symposium on QFD 96] ; June 9 - 11, 1996, Novi, Michigan, USA / sponsored by: QFD Institute Y1 - 1996 N1 - Symposium on Quality Function Deployment ; (8, 1996, Novi, Mich.) PB - QFD Institute CY - Ann Arbor, Mich. ER - TY - JOUR A1 - Jacobs, Stephan A1 - Gebhardt, Michael A1 - Kethers, Stefanie A1 - Rzasa, Wojtek T1 - Filling HTML forms simultaneously: CoWeb — architecture and functionality JF - Computer Networks and ISDN Systems. Vol. 30 (1996), H. Issues 1-7 Y1 - 1996 SN - 0376-5075 SP - 1385 EP - 1395 ER - TY - JOUR A1 - Jacobs, Stephan A1 - Holten, Roland T1 - Goal Driven Business Modelling - Supporting Decision Making within Information System Development JF - Conference on Organizational Computing Systems : August 13 - 16, 1995, Milpitas, Calif. / general ed. Nora Comstock ... Y1 - 1995 SN - 0-89791-706-5 N1 - Conference on Organizational Computing Systems <1995, Milpitas, Calif.> PB - ACM CY - New York, NY ER - TY - JOUR A1 - Hagemann, Hans-Jürgen A1 - Cassidy, Wiliam D. T1 - Diamond growth rates and quality: dependence on gas phase cpmposition / William D. Cassidy [...], Hans-Jurgen Hagemann JF - Diamond, SiC and nitride wide bandgap semiconductors : symposium held April 4 - 8, 1994, San Francisco, California, U.S.A. / ed.: Calvin H. Carter, Jr. .... Y1 - 1994 SN - 1-55899-239-1 N1 - Materials Research Society symposium proceedings ; 339 SP - 285 EP - 291 CY - Pittsburgh, Penn. , ER - TY - JOUR A1 - Jacobs, Stephan A1 - Quernheim, Ulrich T1 - Multicopy ARQ Error Control Techniques for Multipoint Satellite Links / Ulrich Quernheim, Stephan Jacobs JF - Proceedings of the IFIP TC 6 International Conference on Information Network and Data Communication : Lillehammer, Norway, 26 - 29 March, 1990 / ed. by Dipak Khakhar ... Y1 - 1990 SN - 0-444-88696-6 N1 - International Conference on Information Network and Data Communication <3, 1990, Lillehammer> PB - North-Holland CY - Amsterdam [u.a.] ER - TY - JOUR A1 - Jacobs, Stephan A1 - Quernheim, Ulrich T1 - Error Control Techniques for Digital Satellite Links JF - C-band antennas for regional communication systems : 1st European Conference Satellite Communications, ECSC-1, München, 28.-30.11.89 / Wolf, H. u.a. [Mitarb.]. Information und Dokumentation, Messerschmitt-Bölkow-Blohm GmbH (MBB), München Y1 - 1990 PB - OTN-Berichtsstelle, Technisch-wissenschaftliche Information, Messerschmitt-Bölkow-Blohm GmbH CY - München ER - TY - JOUR A1 - Jacobs, Stephan T1 - CSCW for Requirements Engineering - Requirements Engineering for CSCW JF - Proceedings of the Third European Conference on Computer Supported Cooperative Work : 13 - 17 September 1993, Milan, Italy ; ECSCW ' 93 / ed. by Giorgio de Michelis ... Y1 - 1993 SN - 0-7923-2447-1 N1 - ECSCW <3, 1993, Milano> ; [Workshop "CSCW Tools and Technologies: Definging Research Agendas] PB - Kluwer CY - Dordrecht [u.a.] ER - TY - JOUR A1 - Janz, Norbert T1 - Outlier Robust Estimation of an Euler Equation Investment Model with German Firm Level Panel Data JF - Contributions to modern econometrics : from data analysis to economic policy ; [dedicated to Gerd Hansen on the occasion of his 65th Birthday] / ed. by Ingo Klein and Stefan Mittnik Y1 - 2002 SN - 1402073348 N1 - Dynamic modeling in econometrics in economics and finance ; 4 SP - 87 EP - 103 PB - Kluwer Academic Publ. CY - Dordrecht [u.a.] ER - TY - JOUR A1 - Janz, Norbert A1 - Ebling, Günther A1 - Gottschalk, Sandra A1 - Niggemann, Hiltrud T1 - The Mannheim Innovation Panels (MIP and MIP-S) of the Centre for European Economic Research (ZEW) / Janz, N., G. Ebling, S. Gottschalk und H. Niggemann JF - Schmollers Jahrbuch : Zeitschrift für Wirtschafts- und Sozialwissenschaften ; journal of applied social science studies. 121 (2001) Y1 - 2001 SN - 0342-1783 SP - 123 EP - 129 ER - TY - JOUR A1 - Janz, Norbert A1 - Lööf, Hans A1 - Peters, Bettina T1 - Firm Level Innovation and Productivity, Is there a Common Story Across Countries? JF - Problems and Perspectives in Management (2004) Y1 - 2004 SN - ISSN 1727-7051 N1 - online download: http://businessperspectives.org/files/ppm/PPM_EN_2004_02_Janz.pdf SP - 184 EP - 204 ER - TY - BOOK A1 - Janz, Norbert A1 - Lööf, Hans A1 - Peters, Bettina T1 - Firm Level Innovation and Productivity, Is there a Common Story Across Countries? Y1 - 2003 SN - ISSN 1727-7051 N1 - ZEW Diskussion Paper. No 03-26 Online : ftp://ftp.zew.de/pub/zew-docs/dp/dp0326.pdf PB - Zentrum für Europäische Wirtschaftsforschung ZEW CY - Mannheim ER - TY - JOUR A1 - Grundmann, Reinhard T1 - Design Criteria for Aeroacoustic Wind Tunnels Y1 - 1992 N1 - Konferenzeinzelbericht : DGLR-workshop : Joint meeting of the Specialists Groups Test Facilities/Aeroacoustics - Flight Noise . Deutsche Gesellschaft für Luft- und Raumfahrt. Test Facilities Specialist Group ; Deutsche Gesellschaft für Luft- und Raumfahr ER - TY - JOUR A1 - Jacobs, Stephan T1 - The Teamwork Approach in Requirements Engineering JF - The nature of requirements engineering / Matthias Jarke ... (Hrsg.) Y1 - 1999 SN - 3-8265-6174-0 PB - Shaker CY - Aachen ER - TY - JOUR A1 - Heinrichs, Horst A1 - Weck, H. T1 - Efficient finite-element structural analysis by interactive graphic mesh generation JF - CIRP Annals. 30 (1981), H. 1 Y1 - 1981 SP - 279 EP - 284 ER - TY - BOOK A1 - Janz, Norbert A1 - Ebling, Günther A1 - Gottschalk, Sandra A1 - Peters, Bettina T1 - Innovation Activities in the German Economy: Report on indicators from the Innovation Survey 2001 (english translation) / Janz, N., G. Ebling, S. Gottschalk, B. Peters und T. Schmidt Y1 - 2002 PB - ZEW Zentrum für Europäische Wirtschaftsforschung CY - Mannheim ER - TY - BOOK A1 - Janz, Norbert A1 - Gottschalk, Sandra A1 - Hempell, Thomas A1 - Peters, Bettina T1 - Innovation Activities in the German Economy. Report on Indicators from the Innovation Survey 2000 (English translation) / Janz, N., S. Gottschalk, T. Hempell, B. Peters, G. Ebling und H. Niggemann Y1 - 2002 PB - ZEW Zentrum für Europäische Wirtschaftsforschung CY - Mannheim ER - TY - JOUR A1 - Reichert, Gerhard A1 - De Lucchi, Michele T1 - Diffuse Reflexe / Des. Michele De Lucchi, Gerhard Reichert JF - MD - Internatioal magazine of design (2001) Y1 - 2001 SN - 0343-0642 N1 - Außenleuchte "Palme" SP - 26 EP - 27 ER - TY - JOUR A1 - Janz, Norbert T1 - Innovative Power of German Manufacturing Industry Slows Down JF - ZEW news. English edition. 4 (2002), H. 2002 Y1 - 2002 SP - 5 EP - 5 ER - TY - JOUR A1 - Janz, Norbert T1 - Innovations in Germany: Market Novelties Gain Greater Importance JF - ZEW news. English edition (2001) Y1 - 2001 SP - 3 EP - 3 ER - TY - JOUR A1 - Starke, Günther A1 - Kuhne, A.H. A1 - Frassek, B. T1 - Components for the automated GMAW process. Bestandteile des automatischen Metall-Schutzgas-Schweissverfahrens JF - Welding Journal. 63 (1984), H. 1 Y1 - 1984 SN - 0043-2296 SP - 31 EP - 34 ER - TY - JOUR A1 - Blome, Hans-Joachim A1 - Wilson, Thomas L. T1 - The quantum temperature of accelerating cosmological models of an entangled Universe JF - Advances in Space Research. 35 (2005), H. 1 Y1 - 2005 SN - 0273-1177 SP - 111 EP - 115 ER - TY - JOUR A1 - Blome, Hans-Joachim A1 - Priester, Wolfgang T1 - Vacuum energy in cosmic dynamics JF - Astrophysics and Space Science. 117 (1985), H. 2 Y1 - 1985 SN - 0004-640X SP - 327 EP - 335 ER - TY - JOUR A1 - Pietsch, Wolfram A1 - Kurbel, Karl T1 - A Cooperative Work Environment for Evolutionary Software Development / Kurbel, K., Pietsch, W. JF - Multi-user interfaces and applications : proceedings of the IFIP WG 8.4 Conference on Multi-User Interfaces and Applications, Heraklion, Crete, Greece, 24 - 26 September, 1990 / ed. by Simon Gibbs ... Y1 - 1990 SN - 0-444-88760-1 N1 - Conference on Multi-User Interfaces and Applications <1990, Hērakleion> SP - 115 EP - 127 PB - North-Holland Publ. CY - Amsterdam [u.a.] ER - TY - JOUR A1 - Pietsch, Wolfram A1 - Steinbauer, Dieter T1 - Business Process Reengineering JF - Wirtschaftsinformatik. 36 (1994), H. 5 Y1 - 1994 SN - 0937-6429 SP - 502 EP - 505 ER - TY - JOUR A1 - Pietsch, Wolfram A1 - Herzwurm, G. T1 - QFD for Customer-Focused Requirements Engineering / Herzwurm, G., Pietsch, W. JF - Proceedings : 8 - 12 September 2003, Monterey Bay, California, USA / sponsored by IEEE Computer Society Technical Council on Software Engineering (TCSE) ... In cooperation with ACM SigSOFT Y1 - 2003 SN - 0769519806 N1 - International Requirements Engineering Conference ; (11, 2003, Monterey, Calif.) SP - 330 EP - 338 PB - IEEE Computer Society CY - Los Alamitos, Calif. [u.a.] ER - TY - JOUR A1 - Pietsch, Wolfram T1 - Risk-based Deployment of Standard Software Rollout Processes - a pragmatic approach JF - QFD : transactions from the Eleventh Symposium on Quality Function Deployment, [June 12 - 18, 1999, Novi, Michigan] / QFD Institute Y1 - 1999 SN - 1889477117 N1 - Symposium on Quality Function Deployment ; (11, 1999, Novi, Mich.) Online unter: http://www.herzwurm.de/Publikationen/daten/lit/deployment.pdf SP - 349 EP - 359 PB - QFD Institute CY - Ann Arbor, Mich. ER - TY - BOOK A1 - Pietsch, Wolfram T1 - Software quality management III : [... held in Seville in April 1995] / [Third International Conference on Software Quality Management]. Ed.: M. Ross Y1 - 1995 SN - 1853123099 N1 - International Conference on Software Quality Management ; (3, 1995, Sevilla) PB - Computational Mechanics Publ. CY - Southampton [u.a.] ER - TY - JOUR A1 - Pietsch, Wolfram A1 - Kurbel, Karl A1 - Jung, R. T1 - Modeling Knowledge about Long-term IS-Integration and Integration-oriented Reengineering with KADS / Kurbel, K., Jung, R., Pietsch, W. JF - Distributed information systems in business / W. König ... (eds.) Y1 - 1996 SN - 3-540-61094-4 PB - Springer CY - Berlin [u.a.] ER - TY - BOOK A1 - Janz, Norbert A1 - Licht, Georg T1 - Innovation Activities and European Patenting of German Firms. A Panel Data Analysis / Janz, N., G. Licht Y1 - 2002 ER - TY - BOOK A1 - Janz, Norbert A1 - Peters, Bettina T1 - Innovation and Innovation Success in the German Manufacturing Sector. Econometric Evidence at Firm Level / Janz, N. and Peters, B. Y1 - 2002 ER - TY - JOUR A1 - Pietsch, Wolfram A1 - Taudes, A. T1 - Groupware Support for Interorganizational Courseware-Development. A Case Study / Pietsch, W. , Taudes, A. JF - IM : die Fachzeitschrift für Information Management & Consulting (1994) Y1 - 1994 SN - 0930-5181, 1616-1017 SP - 12 EP - 18 ER - TY - JOUR A1 - Pietsch, Wolfram A1 - Kurbel, K. A1 - Labentz, M. T1 - Prototyping und Projektmanagement bei großen Entwicklungsteams / Kurbel, K., Labentz, M., Pietsch, W. JF - Information management : IM ; Praxis, Ausbildung u. Forschung d. Wirtschaftsinformatik. 2 (1987), H. 1 Y1 - 1987 SN - 0930-5181 SP - 6 EP - 15 ER - TY - JOUR A1 - Pietsch, Wolfram A1 - Kurbel, Karl T1 - A Portable Implementation of Index Sequential Input-Output [Part 1] / Kurbel, Karl; Pietsch, W. JF - Ada letters. 6 (1986), H. 2 Y1 - 1986 SN - 0736-721X SP - 29 EP - 40 ER - TY - JOUR A1 - Pietsch, Wolfram A1 - Kurbel, Karl T1 - A Portable Implementation of Index Sequential Input-Output [Part 2] / Kurbel, Karl; Pietsch, W. JF - Ada letters. 6 (1986), H. 3 Y1 - 1986 SN - 0736-721X SP - 6 EP - 13 ER - TY - JOUR A1 - Blome, Hans-Joachim A1 - Priester, W. T1 - Big Bounce in the very early Universe JF - Astronomy and Astrophysics. 250 (1991), H. 1 Y1 - 1991 SN - 0004-6361 SP - 43 EP - 49 ER - TY - JOUR A1 - Bullerschen, Klaus-Gerd A1 - Wilhelmi, Herbert A1 - Wimmer, W. T1 - Influence of non-uniform material properties and water cooling on current density and temperature profiles in arc furnace elektrodes JF - Steel Research. 56 (1985), H. 11 Y1 - 1985 SN - 0177-4832 SP - 559 EP - 564 ER - TY - BOOK A1 - Janz, Norbert A1 - Ebling, Günther A1 - Niggemann, Hiltrud A1 - Stahl, Harald T1 - 2nd Community Innovation Survey. 1st Interim Report. Report prepared for Eurostat / Ebling, G., N. Janz, H. Niggemann und H. Stahl Y1 - 1998 PB - ZEW Zentrum für Europäische Wirtschaftsförderung CY - Mannheim ER - TY - BOOK A1 - Gottschalk, Sandra A1 - Janz, Norbert A1 - Rennings, Klaus T1 - Characteristics and Performance of Eco-Innovative Firms in the German Service Sector Y1 - 1998 ER - TY - BOOK A1 - Janz, Norbert A1 - Ebling, Günther A1 - Göggerle, J. A1 - Licht, Georg T1 - The Longitudinal Aspect of Innovation Surveys / G. Ebling, J. Göggerle, N. Janz, G. Licht und H. Stahl Y1 - 1998 PB - ZEW Zentrum für Europäische Wirtschaftsförderung CY - Mannheim ER - TY - BOOK A1 - Janz, Norbert A1 - Gottschalk, Sandra T1 - Innovation Dynamics and Endogenours Market Structue. An Econometric Investigation with Aggregated Innovation Survey Data / Gottschalk, S. und N. Janz Y1 - 2001 N1 - ZEW-Discussion Paper 01-39 online unter ftp://ftp.zew.de/pub/zew-docs/dp/dp0139.pdf PB - ZEW Zentrum für Europäische Wirtschaftsförderung CY - Mannheim ER - TY - BOOK A1 - Janz, Norbert A1 - Ebling, Günther T1 - Export and Innovation Activities in the German Service Sector. Empirical Evidence at the Firm Level / Ebling, G.. und N. Janz Y1 - 1999 N1 - ZEW-Discussion Paper 99-53 online unter ftp://ftp.zew.de/pub/zew-docs/dp/dp5399.pdf PB - ZEW Zentrum für Europäische Wirtschaftsförderung CY - Mannheim ER - TY - BOOK A1 - Janz, Norbert T1 - Interpreting Estimation Result of Euler Equation Investment Models when Factor Markets are Imperfectly Competitive Y1 - 1997 N1 - ZEW-Discussion Paper 97-29 online unter ftp://ftp.zew.de/pub/zew-docs/dp/dp2997.pdf PB - ZEW Zentrum für Europäische Wirtschaftsforschung CY - Mannheim ER - TY - JOUR A1 - Starke, Günther A1 - Drews, P. T1 - Development approaches for advanced control in automated arc welding Y1 - 1985 N1 - Konferenz-Einzelbericht: Automation and robotisation in welding and allied processes. International conference on automation and robotisation in welding and allied processes, Strasbourg, FR, 02.09.1985-03.09.1985 SP - 115 EP - 124 ER - TY - BOOK A1 - Janz, Norbert A1 - Ebling, Günther A1 - Gottschalk, Sandra A1 - Niggemann, Hiltrud T1 - Prospects of the German Economy: Innovation Activities in the Manufacturing Sector. Sur­vey 1999 Report to the Federal Ministry of Education and Research (English translation) / Janz, N., G. Ebling, S. Gottschalk und H. Niggemann Y1 - 2000 PB - ZEW Zentrum für Europäische Wirtschaftsforschung CY - Mannheim ER - TY - BOOK A1 - Janz, Norbert A1 - Ebling, Günther A1 - Gottschalk, Sandra A1 - Niggemann, Hiltrud T1 - Services in the Fu­ture: Innovation Activities in the Service Sector. Survey 1999 (English translation) / Janz, N., G. Ebling, S. Gottschalk und H. Niggemann Y1 - 2000 PB - ZEW Zentrum für Europäische Wirtschaftsforschung CY - Mannheim ER - TY - BOOK A1 - Janz, Norbert A1 - Ebling, Günther A1 - Gottschalk, Sandra A1 - Niggemann, Hiltrud T1 - 2nd Community Innovation Survey. Final Report. Report prepared for Eurostat / Ebling, G. , S. Gottschalk, N. Janz und H. Niggemann Y1 - 1999 PB - ZEW Zentrum für Europäische Wirtschaftsforschung CY - Mannheim ER - TY - BOOK A1 - Janz, Norbert A1 - Ebling, Günther A1 - Gottschalk, Sandra A1 - Niggemann, Hiltrud T1 - 2nd Community Innovation Survey. 2nd Interim Report. Report prepared for Eurostat / Ebling, G. , S. Gottschalk, N. Janz und H. Niggemann Y1 - 1999 PB - ZEW Zentrum für Europäische Wirtschaftsforschung CY - Mannheim ER - TY - BOOK A1 - Janz, Norbert A1 - Ebling, Günther A1 - Gottschalk, Sandra A1 - Licht, Georg T1 - Prospects of the German Economy: Innovation Activities in the Manufacturing Sector. Survey 1998 (English translation) / Janz, N., G. Ebling, S. Gottschalk, G. Licht und H. Niggemann Y1 - 1999 PB - ZEW Zentrum für Europäische Wirtschaftsforschung CY - Mannheim ER - TY - BOOK A1 - Janz, Norbert A1 - Ebling, Günther A1 - Gottschalk, Sandra A1 - Licht, Georg T1 - Services in the Future. Innovation Activities in the Service Sector. Survey 1998 (English translation) / Janz, N., G. Ebling, S. Gottschalk, G. Licht und H. Niggemann Y1 - 1999 PB - ZEW Zentrum für Europäische Wirtschaftsforschung CY - Mannheim ER - TY - BOOK A1 - Janz, Norbert A1 - Licht, Georg A1 - Ebling, Günther A1 - Niggemann, Hiltrud T1 - Innovation in the Service Sector. Selected Facts and Some Policy Conclusions / Licht, G., G. Ebling, N. Janz, H. Niggemann Y1 - 1999 PB - European Commission CY - Luxembourg ER - TY - JOUR A1 - Starke, Günther A1 - Drews, P. T1 - Le soudage au siecle de l'informatique JF - Souder. 18 (1994), H. 6 Y1 - 1994 SN - 0246-1900 SP - 33 EP - 44 ER - TY - JOUR A1 - Starke, Günther T1 - Welding in the century of information technology. Session 1 JF - Welding in the World. 34 (1994), H. 9 Y1 - 1994 SN - 0043-2288 SP - 1 EP - 20 ER - TY - JOUR A1 - Blome, Hans-Joachim T1 - The scale of the universe: a unit of length JF - Comments on astrophysics. 17 (1994) Y1 - 1994 SN - 0146-2970 SP - 327 EP - 335 ER - TY - JOUR A1 - Blome, Hans-Joachim A1 - Kundt, Wolfgang T1 - Leptonic jets from young stellar objects? JF - Astrophysics and Space Science. 148 (1988), H. 2 Y1 - 1988 SN - 0004-640X SP - 343 EP - 361 ER - TY - JOUR A1 - Blome, Hans-Joachim A1 - Chu, Y. A1 - Hoell, J A1 - Priester, W. T1 - On the observational discrimination of Friedmann-Lemaître models JF - Large Scale Structures of the Universe: Proceedings of the 130th Symposium of the International Astronomical Union, dedicated to the memory of Marc A. Aaronson (1950-1987) held in Balatonfured, Hungary, June 15-20, 1987. Edited by Jean Audouze, Marie-Christine Pelletan and Sandor Szalay. Y1 - 1988 SN - 90-277-2742-2 N1 - International Astronomical Union. Symposium no. 130 SP - 517 PB - Kluwer Academic Publishers CY - Dordrecht ER - TY - JOUR A1 - Blome, Hans-Joachim A1 - Wilson, Thomas L. T1 - The entangled Universe JF - Relativistic Astrophysics and Cosmology, Proceedings of the 13th Course of the International School of Cosmic Ray Astrophysics, held in Erice, Italy, 2-14 June 2002 / edited by Maurice M. Shapiro ... [et al.] Y1 - 2004 SN - 981-238-727-7 SP - 23 EP - 38 PB - World Scientific Publishing CY - New Jersey, NJ ER -