TY  - CHAP
A1  - Butenweg, Christoph
A1  - Marinkovic, Marko
A1  - Fehling, Ekkehard
A1  - Pfetzing, Thomas
A1  - Kubalski, Thomas
T1  - Experimental and Numerical Investigations of Reinforced Concrete Frames with Masonry Infills under Combined In- and Out-of-plane Seismic Loading
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 11477
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Marinkovic, Marko
A1  - Butenweg, Christoph
T1  - Innovative System for Earthquake Resistant Masonry Infill Walls
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 11479
SP  - 1
EP  - 12
ER  - 
TY  - JOUR
A1  - Klein, Michel
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - The Influence of Soil-Structure-Interaction on the Fatigue Analysis in the Foundation Design of Onshore Wind Turbines
JF  - Procedia Engineering
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.proeng.2017.09.325
SN  - 1877-7058
VL  - 199
SP  - 3218
EP  - 3223
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Rosin, Julia
A1  - Butenweg, Christoph
A1  - Cacciatore, Pamela
A1  - Boesen, Niklas
T1  - Investigation of the seismic performance of modern masonry buildings during the Emilia Romagna  earthquake  series
T1  - Untersuchungen des seismischen Verhaltens von  modernen Mauerwerksbauten während der  Erdbebenserie in der Emilia Romagna
JF  - Mauerwerk
N2  - The article presents the investigation of the seismic behaviour of a modern URM building located in the municipality of Finale Emilia in province of Modena, Northern Italy. The building is situated in the centre of the series of the 2012 Northern Italy earthquakes and has not suffered any damage during the earthquake series in 2012. The observed earthquake resistance of the building is compared with predicted resistances based on linear and nonlinear design approaches according to Eurocode. Furthermore, probabilistic analyses based on nonlinear calculation models taking into account scattering of the most relevant input parameters are carried out to identify their influence to the results and to derive fragility curves.
Y1  - 2018
U6  - http://dx.doi.org/10.1002/dama.201800013
SN  - 1437-1022
VL  - 22
IS  - 4
SP  - 238
EP  - 250
PB  - Ernst & Sohn
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Marinkovic, Marko
A1  - Salatic, Ratko
T1  - Experimental results of reinforced concrete frames with masonry infills under combined quasi-static in-plane and out-of-plane seismic loading
JF  - Bulletin of Earthquake Engineering
Y1  - 2019
U6  - http://dx.doi.org/10.1007/s10518-019-00602-7
SN  - 1573-1456
VL  - 17
SP  - 3397
EP  - 3422
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Rossi, Leonardo
A1  - Parisi, Davide
A1  - Casari, Chiara
A1  - Montanari, Luca
A1  - Ruggieri, Gabriella
A1  - Holtschoppen, Britta
A1  - Butenweg, Christoph
T1  - Empirical Data about Direct Economic Consequences of Emilia-Romagna 2012 Earthquake on Long-Span-Beam Buildings
JF  - Earthquake Spectra
Y1  - 2019
U6  - http://dx.doi.org/10.1193/100118EQS224DP
SN  - 1944-8201
VL  - 35
IS  - 4
SP  - 1979
EP  - 2001
ER  - 
TY  - CHAP
A1  - Marinkovic, Marko
A1  - Butenweg, Christoph
T1  - Seismic behaviour of RC frames with uncoupled masonry infills having two storeys or two bays
T2  - 17th International Conference -From historical to sustainable masonry, Krakow, Poland, July 5-8, 2020
Y1  - 2020
U6  - http://dx.doi.org/10.1201/9781003098508-72
SP  - 1
EP  - 7
ER  - 
TY  - BOOK
A1  - Butenweg, Christoph
A1  - Hoffmeister, Benno
A1  - Holtschoppen, Britta
A1  - Klinkel, Sven
A1  - Rosin, Julia
A1  - Schmitt, Timo
T1  - Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)
Y1  - 2020
SN  - 978-3-86359-729-0
PB  - Apprimus Verlag
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Markinkovic, Marko
A1  - Butenweg, Christoph
A1  - Pavese, A.
A1  - Lanese, I.
A1  - Hoffmeister, B.
A1  - Pinkawa, M.
A1  - Vulcu, C.
A1  - Bursi, O.
A1  - Nardin, C.
A1  - Paolacci, F.
A1  - Quinci, G.
A1  - Fragiadakis, M.
A1  - Weber, F.
A1  - Huber, P.
A1  - Renault, P.
A1  - Gündel, M.
A1  - Dyke, S.
A1  - Ciucci, M.
A1  - Marino, A.
T1  - Investigation of the seismic behaviour of structural and nonstructural components in industrial facilities by means of shaking table tests
T2  - Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)
Y1  - 2020
SN  - 978-3-86359-729-0
SP  - 159
EP  - 172
ER  - 
TY  - CHAP
A1  - Cacciatore, Pamela
A1  - Butenweg, Christoph
T1  - Seismic safety of cylindrical granular material steel silos under seismic loading
T2  - Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)
Y1  - 2020
SN  - 978-3-86359-729-0
SP  - 231
EP  - 244
ER  - 
TY  - CHAP
A1  - Michel, Philipp
A1  - Rosin, Julia
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - Soil-dependent earthquake spectra in the analysis of liquid-storage-tanks on compliant soil
T2  - Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)
Y1  - 2020
SN  - 978-3-86359-729-0
SP  - 245
EP  - 254
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Rosin, Julia
A1  - Holler, Stefan
T1  - Analysis of cylindrical granular material silos under seismic excitation
JF  - Buildings
N2  - Silos generally work as storage structures between supply and demand for various goods, and their structural safety has long been of interest to the civil engineering profession. This is especially true for dynamically loaded silos, e.g., in case of seismic excitation. Particularly thin-walled cylindrical silos are highly vulnerable to seismic induced pressures, which can cause critical buckling phenomena of the silo shell. The analysis of silos can be carried out in two different ways. In the first, the seismic loading is modeled through statically equivalent loads acting on the shell. Alternatively, a time history analysis might be carried out, in which nonlinear phenomena due to the filling as well as the interaction between the shell and the granular material are taken into account. The paper presents a comparison of these approaches. The model used for the nonlinear time history analysis considers the granular material by means of the intergranular strain approach for hypoplasticity theory. The interaction effects between the granular material and the shell is represented by contact elements. Additionally, soil–structure interaction effects are taken into account.
KW  - granular silo
KW  - earthquake engineering
KW  - hypoplasticity
KW  - nonlinear transient analyses
Y1  - 2017
U6  - http://dx.doi.org/10.3390/buildings7030061
SN  - 2075-5309
VL  - 7
IS  - 3
SP  - 1
EP  - 12
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Kubalski, T.
A1  - Marinković, Marko
A1  - Butenweg, Christoph
ED  - Modena, Claudio
T1  - Numerical investigation of masonry infilled R.C. frames
T2  - Brick and Block Masonry. Proceedings of the 16th International Brick and Block Masonry Conference, Padova, Italy, 26-30 June 2016
Y1  - 2016
SN  - 9781315374963
SP  - 1219
EP  - 1226
PB  - CRC Press
CY  - Leiden
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Marinkovic, Marko
T1  - Damage reduction system for masonry infill walls under seismic loading
T2  - ce/papers
N2  - Reinforced concrete (RC) frames with masonry infills are frequently used in seismic regions all over the world. Generally masonry infills are considered as nonstructural elements and thus are typically neglected in the design process. However, the observations made after strong earthquakes have shown that masonry infills can modify the dynamic behavior of the structure significantly. The consequences were total collapses of buildings and loss of human lives. This paper presents the new system INODIS (Innovative Decoupled Infill System) developed within the European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in RC Buildings). INODIS decouples the frame and the masonry infill by means of special U-shaped rubbers placed in between frame and infill. The effectiveness of the system was investigated by means of full scale tests on RC frames with masonry infills subjected to in-plane and out-of-plane loading. Furthermore small specimen tests were conducted to determine material characteristics of the components and the resistances of the connections. Finally, a micromodel was developed to simulate the in-plane behavior of RC frames infilled with AAC blocks with and without installation of the INODIS system.
KW  - earthquakes
KW  - in-plane and out-of-plane failure
KW  - INODIS
KW  - RC frames
Y1  - 2018
U6  - http://dx.doi.org/10.1002/cepa.863
N1  - Special Issue: ICAAC ‐ 6th International Conference on Autoclaved Aerated Concrete
VL  - 2
IS  - 4
SP  - 267
EP  - 273
PB  - Ernst & Sohn Verlag
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Rajan, Sreelakshmy
A1  - Holtschoppen, B.
A1  - Dalguer, L. A.
A1  - Klinkel, S.
A1  - Butenweg, Christoph
ED  - Sas, P.
T1  - Seismic fragility analysis of a non-conventional reinforced concrete structure considering different uncertainties
T2  - Proceedings of ISMA2016, International Conference on Noise and Vibration Engineering/USD2016, International Conference on Uncertainty in Structural Dynamics, / ISMA 2016, USD 2016
Y1  - 2016
SP  - 4213
EP  - 4225
PB  - KU Leuven
CY  - Leuven
ER  - 
TY  - CHAP
A1  - Rajan, S.
A1  - Butenweg, Christoph
A1  - Dalguer, L. A.
A1  - An, J. H.
A1  - Renault, P.
A1  - Klinkel, S.
T1  - Fragility curves for a three-storey reinforced concrete test structure of the international benchmark SMART 2013
T2  - 16th World Conference on Earthquake, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
Y1  - 2017
N1  - Paper No 2119
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - JOUR
A1  - Becker, Meike
A1  - Frauenrath, Tobias
A1  - Hezel, Fabian
A1  - Krombach, Gabriele A.
A1  - Kremer, Ute
A1  - Koppers, Benedikt
A1  - Butenweg, Christoph
A1  - Goemmel, Andreas
A1  - Utting, Jane F.
A1  - Schulz-Menger, Jeanette
A1  - Niendorf, Thoralf
T1  - Comparison of left ventricular function assessment using phonocardiogram- and electrocardiogram-triggered 2D SSFP CINE MR imaging at 1.5 T and 3.0 T
JF  - European Radiology
N2  - Objective: As high-field cardiac MRI (CMR) becomes more widespread the propensity of ECG to interference from electromagnetic fields (EMF) and to magneto-hydrodynamic (MHD) effects increases and with it the motivation for a CMR triggering alternative. This study explores the suitability of acoustic cardiac triggering (ACT) for left ventricular (LV) function assessment in healthy subjects (n=14). Methods: Quantitative analysis of 2D CINE steady-state free precession (SSFP) images was conducted to compare ACT’s performance with vector ECG (VCG). Endocardial border sharpness (EBS) was examined paralleled by quantitative LV function assessment. Results: Unlike VCG, ACT provided signal traces free of interference from EMF or MHD effects. In the case of correct Rwave recognition, VCG-triggered 2D CINE SSFP was immune to cardiac motion effects—even at 3.0 T. However, VCG-triggered 2D SSFP CINE imaging was prone to cardiac motion and EBS degradation if R-wave misregistration occurred. ACT-triggered acquisitions yielded LV parameters (end-diastolic volume (EDV), endsystolic volume (ESV), stroke volume (SV), ejection fraction (EF) and left ventricular mass (LVM)) comparable with those derived fromVCG-triggered acquisitions (1.5 T: ESVVCG=(56± 17) ml, EDVVCG=(151±32)ml, LVMVCG=(97±27) g, SVVCG=(94± 19)ml, EFVCG=(63±5)% cf. ESVACT= (56±18) ml, EDVACT=(147±36) ml, LVMACT=(102±29) g, SVACT=(91± 22) ml, EFACT=(62±6)%; 3.0 T: ESVVCG=(55±21) ml, EDVVCG=(151±32) ml, LVMVCG=(101±27) g, SVVCG=(96±15) ml, EFVCG=(65±7)% cf. ESVACT=(54±20) ml, EDVACT=(146±35) ml, LVMACT= (101±30) g, SVACT=(92±17) ml, EFACT=(64±6)%). Conclusions: ACT’s intrinsic insensitivity to interference from electromagnetic fields renders
KW  - Magnetic resonance imaging (MRI)
KW  - MR-stethoscope
KW  - Magnetic field strength
KW  - Left ventriular function
KW  - Cardiovascular MRI
Y1  - 2010
U6  - http://dx.doi.org/10.1007/s00330-009-1676-z
SN  - 1432-1084 (Onlineausgabe)
SN  - 0938-7994 (Druckausgabe)
VL  - 20
SP  - 1344
EP  - 1355
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Mistler, M.
A1  - Butenweg, Christoph
A1  - Anthoine, A.
T1  - Evaluation of the failure criterion for masonry by homogenisation
T2  - Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping and C.A. Mota Soares
Y1  - 2004
SN  - 0-948749-95-4
U6  - http://dx.doi.org/10.4203/ccp.79.201
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Gkatzogias, Konstantinos
A1  - Veljkoviv, Ana
A1  - Pohoryles, Daniel A.
A1  - Tsionis, Georgios
A1  - Bournas, Dionysios A.
A1  - Crowley, Helen
A1  - Norlén, Hedvig
A1  - Butenweg, Christoph
A1  - Gervasio, Helena
A1  - Manfredi, Vincenzo
A1  - Masi, Angelo
A1  - Zaharieva, Roumiana
ED  - Gkatzogias, Konstantinos
ED  - Tsionis, Georgios
T1  - Policy practice and regional impact assessment for building renovation
T2  - REEBUILD Integrated Techniques for the Seismic Strengthening & Energy Efficiency of Existing Buildings
N2  - The work presented in this report provides scientific support to building renovation policies in the EU by promoting a holistic point of view on the topic. Integrated renovation can be seen as a nexus between European policies on disaster resilience, energy efficiency and circularity in the building sector. An overview of policy measures for the seismic and energy upgrading of buildings across EU Member States identified only a few available measures for combined upgrading. Regulatory framework, financial instruments and digital tools similar to those for energy renovation, together with awareness and training may promote integrated renovation. A framework for regional prioritisation of building renovation was put forward, considering seismic risk, energy efficiency, and socioeconomic vulnerability independently and in an integrated way. Results indicate that prioritisation of building renovation is a multidimensional problem. Depending on priorities, different integrated indicators should be used to inform policies and accomplish the highest relative or most spread impact across different sectors. The framework was further extended to assess the impact of renovation scenarios across the EU with a focus on priority regions. Integrated renovation can provide a risk-proofed, sustainable, and inclusive built environment, presenting an economic benefit in the order of magnitude of the highest benefit among the separate interventions. Furthermore, it presents the unique capability of reducing fatalities and energy consumption at the same time and, depending on the scenario, to a greater extent.
Y1  - 2022
SN  - 978-92-76-60454-9
U6  - http://dx.doi.org/10.2760/883122
SN  - 1831-9424
SP  - 1
EP  - 68
PB  - Publications Office of the European Union
CY  - Luxembourg
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
ED  - Vacareanu, Radu
ED  - Ionescu, Constantin
T1  - Seismic design and evaluation of industrial facilities
T2  - Progresses in European Earthquake Engineering and Seismology. Third European Conference on Earthquake Engineering and Seismology – Bucharest, 2022
N2  - Industrial facilities must be thoroughly designed to withstand seismic
actions as they exhibit an increased loss potential due to the possibly wideranging
damage consequences and the valuable process engineering equipment.
Past earthquakes showed the social and political consequences of seismic damage
to industrial facilities and sensitized the population and politicians worldwide
for the possible hazard emanating from industrial facilities. However, a holistic
approach for the seismic design of industrial facilities can presently neither be
found in national nor in international standards. The introduction of EN 1998-4
of the new generation of Eurocode 8 will improve the normative situation with
specific seismic design rules for silos, tanks and pipelines and secondary process
components. The article presents essential aspects of the seismic design of
industrial facilities based on the new generation of Eurocode 8 using the example
of tank structures and secondary process components. The interaction effects of
the process components with the primary structure are illustrated by means of
the experimental results of a shaking table test of a three story moment resisting
steel frame with different process components. Finally, an integrated approach of
digital plant models based on building information modelling (BIM) and structural
health monitoring (SHM) is presented, which provides not only a reliable
decision-making basis for operation, maintenance and repair but also an excellent
tool for rapid assessment of seismic damage.
KW  - Industrial facilities
KW  - Seismic design
KW  - Tanks
KW  - EN 1998-4
KW  - Structural health monitoring
Y1  - 2022
SN  - 978-3-031-15103-3
SN  - 978-3-031-15106-4
SN  - 978-3-031-15104-0
U6  - http://dx.doi.org/10.1007/978-3-031-15104-0
SN  - 2524-342X
SN  - 2524-3438
N1  - Third European Conference on Earthquake Engineering and Seismology. 04-09.09 Bucharest, Romania.
SP  - 449
EP  - 464
PB  - Springer
CY  - Cham
ER  -