TY - THES A1 - Tran, Hui Ming T1 - Das Haus des Meeres : Entwicklung und Konzeption eines neuen Erscheinungsbildes für den Aqua Terra Zoo N2 - Im Zentrum von Wien befindet sich in einem ehemaligen Flakturm aus dem 2. Weltkrieg, das Haus des Meeres. Auf ca 5000m2 beherbergen sie ca. 10.000 Tiere. Der Fokus liegt dabei auf die Unterwasserwelt und bietet einen ausgiebigen Einblick in die Welt der Meere. Das neue Erscheinungsbild positioniert die private und gemeinnützige Einrichtung sowohl als Ort des Zusammenkommens als auch der Wissensvermittlung. Dabei soll das Designkonzept vor dem Betreten des Zoos seine besondere Baukonstruktion aufzeigen und von Anfang an die Tiefe sowie Tiefenzonen der Meere einbeziehen. Damit distanzieren sie sich entscheidend von ähnlichen Institutionen. Inspiriert von der Teilung zwischen der Oberfläche und dem Meer, entstand eine feine abstrakte Skala. Diese visualisiert den Meeresspiegel mit seiner Tiefe und dient medienübergreifend als Orientierungshilfe. KW - Corporate Design KW - Ozean KW - Zoo KW - Meere KW - Erscheinungsbild Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - CHAP A1 - Laack, Walter van ED - Ortmanns, Bruno ED - Brauers, Angelika T1 - Nahtoderfahrungen, Sterben und Tod aus der Perspektive von Medizin, Naturwissenschaften und Philosophie T2 - Thanatologie im deutschsprachigen Raum – Interdisziplinäre Perspektiven Y1 - 2023 SN - 978-3-98527-661-5 SP - 129 EP - 139 PB - Rediroma-Verlag ER - TY - THES A1 - Trautmann, Christina T1 - Dirty Air N2 - Die Formel 1 ist ein Extremsport und soll wie viele andere Wettbewerbe in diesem Bereich unterhalten. Die Konkurrenz unter den Fahrern ist jederzeit präsent, jedoch das dadurch steigende Gefahrenpotenzial nicht. In der Graphic Novel „Dirty Air“ wir auf Basis eines dokumentarisch-informativen Ansatzes aufgezeigt, inwiefern die Rivalität zweier Fahrer Auswirkungen auf die Sicherheit des Sports haben kann. Es wird über die wichtigsten Ereignisse der Saison 2021 erzählt, die beispielhaft dafür stehen, wie sich der Wettbewerb zuspitzen kann. Die Geschehnisse sind realen Gegebenheiten nachempfunden und illustrativ umgesetzt. Ziel der Arbeit ist es, die Leser*innen zum Nachdenken anzuregen und Verständnis zu schaffen. Rivalitäten sind wichtig und notwendig im Sport, sollten jedoch kein Anker für Hass und unüberlegte Risiken sein, egal ob innerhalb des Fahrerlagers oder der Fangemeinschaft. KW - Illustration KW - Formel 1 KW - Konkurrenz KW - Graphic Novel KW - Rivalität Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - Digel, Ilya A1 - Akimbekov, Nuraly S. A1 - Rogachev, Evgeniy A1 - Pogorelova, Natalia T1 - Bacterial cellulose produced by Medusomyces gisevii on glucose and sucrose: biosynthesis and structural properties JF - Cellulose N2 - In this work, the effects of carbon sources and culture media on the production and structural properties of bacterial cellulose (BC) synthesized by Medusomyces gisevii have been studied. The culture medium was composed of different initial concentrations of glucose or sucrose dissolved in 0.4% extract of plain green tea. Parameters of the culture media (titratable acidity, substrate conversion degree etc.) were monitored daily for 20 days of cultivation. The BC pellicles produced on different carbon sources were characterized in terms of biomass yield, crystallinity and morphology by field emission scanning electron microscopy (FE-SEM), atomic force microscopy and X-ray diffraction. Our results showed that Medusomyces gisevii had higher BC yields in media with sugar concentrations close to 10 g L−1 after a 18–20 days incubation period. Glucose in general lead to a higher BC yield (173 g L−1) compared to sucrose (163.5 g L−1). The BC crystallinity degree and surface roughness were higher in the samples synthetized from sucrose. Obtained FE-SEM micrographs show that the BC pellicles synthesized in the sucrose media contained densely packed tangles of cellulose fibrils whereas the BC produced in the glucose media displayed rather linear geometry of the BC fibrils without noticeable aggregates. KW - Bacterial cellulose KW - Medusomyces gisevi KW - Carbon sources KW - Culture media KW - Cellulose nanostructure Y1 - 2023 U6 - https://doi.org/10.1007/s10570-023-05592-z SN - 1572-882X (Online) SN - 0969-0239 (Print) N1 - Corresponding author: Ilya Digel PB - Springer Science + Business Media CY - Dordrecht ER - TY - JOUR A1 - Thomessen, Karolin A1 - Thoma, Andreas A1 - Braun, Carsten T1 - Bio-inspired altitude changing extension to the 3DVFH* local obstacle avoidance algorithm JF - CEAS Aeronautical Journal N2 - Obstacle avoidance is critical for unmanned aerial vehicles (UAVs) operating autonomously. Obstacle avoidance algorithms either rely on global environment data or local sensor data. Local path planners react to unforeseen objects and plan purely on local sensor information. Similarly, animals need to find feasible paths based on local information about their surroundings. Therefore, their behavior is a valuable source of inspiration for path planning. Bumblebees tend to fly vertically over far-away obstacles and horizontally around close ones, implying two zones for different flight strategies depending on the distance to obstacles. This work enhances the local path planner 3DVFH* with this bio-inspired strategy. The algorithm alters the goal-driven function of the 3DVFH* to climb-preferring if obstacles are far away. Prior experiments with bumblebees led to two definitions of flight zone limits depending on the distance to obstacles, leading to two algorithm variants. Both variants reduce the probability of not reaching the goal of a 3DVFH* implementation in Matlab/Simulink. The best variant, 3DVFH*b-b, reduces this probability from 70.7 to 18.6% in city-like worlds using a strong vertical evasion strategy. Energy consumption is higher, and flight paths are longer compared to the algorithm version with pronounced horizontal evasion tendency. A parameter study analyzes the effect of different weighting factors in the cost function. The best parameter combination shows a failure probability of 6.9% in city-like worlds and reduces energy consumption by 28%. Our findings demonstrate the potential of bio-inspired approaches for improving the performance of local path planning algorithms for UAV. KW - UAV KW - Obstacle avoidance KW - Autonomy KW - Local path planning Y1 - 2023 U6 - https://doi.org/10.1007/s13272-023-00691-w SN - 1869-5590 (Online) SN - 1869-5582 (Print) N1 - Corresponding author: Karolin Thomessen PB - Springer CY - Wien ER - TY - JOUR A1 - Sildatke, Michael A1 - Karwanni, Hendrik A1 - Kraft, Bodo A1 - Zündorf, Albert T1 - A distributed microservice architecture pattern for the automated generation of information extraction pipelines JF - SN Computer Science N2 - Companies often build their businesses based on product information and therefore try to automate the process of information extraction (IE). Since the information source is usually heterogeneous and non-standardized, classic extract, transform, load techniques reach their limits. Hence, companies must implement the newest findings from research to tackle the challenges of process automation. They require a flexible and robust system that is extendable and ensures the optimal processing of the different document types. This paper provides a distributed microservice architecture pattern that enables the automated generation of IE pipelines. Since their optimal design is individual for each input document, the system ensures the ad-hoc generation of pipelines depending on specific document characteristics at runtime. Furthermore, it introduces the automated quality determination of each available pipeline and controls the integration of new microservices based on their impact on the business value. The introduced system enables fast prototyping of the newest approaches from research and supports companies in automating their IE processes. Based on the automated quality determination, it ensures that the generated pipelines always meet defined business requirements when they come into productive use. KW - Architectural design KW - Model-driven software engineering KW - Software and systems modeling KW - Enterprise information systems KW - Information extraction Y1 - 2023 U6 - https://doi.org/10.1007/s42979-023-02256-4 SN - 2661-8907 N1 - Corresponding authors: Michael Sildatke, Hendrik Karwanni IS - 4, Article number: 833 PB - Springer Singapore CY - Singapore ER - TY - JOUR A1 - Alnemer, Momin Sami Mohammad A1 - Kotliar, Konstantin A1 - Neuhaus, Valentin A1 - Pape, Hans-Christoph A1 - Ciritsis, Bernhard D. T1 - Cost-effectiveness analysis of surgical proximal femur fracture prevention in elderly: a Markov cohort simulation model JF - Cost Effectiveness and Resource Allocation N2 - Background Hip fractures are a common and costly health problem, resulting in significant morbidity and mortality, as well as high costs for healthcare systems, especially for the elderly. Implementing surgical preventive strategies has the potential to improve the quality of life and reduce the burden on healthcare resources, particularly in the long term. However, there are currently limited guidelines for standardizing hip fracture prophylaxis practices. Methods This study used a cost-effectiveness analysis with a finite-state Markov model and cohort simulation to evaluate the primary and secondary surgical prevention of hip fractures in the elderly. Patients aged 60 to 90 years were simulated in two different models (A and B) to assess prevention at different levels. Model A assumed prophylaxis was performed during the fracture operation on the contralateral side, while Model B included individuals with high fracture risk factors. Costs were obtained from the Centers for Medicare & Medicaid Services, and transition probabilities and health state utilities were derived from available literature. The baseline assumption was a 10% reduction in fracture risk after prophylaxis. A sensitivity analysis was also conducted to assess the reliability and variability of the results. Results With a 10% fracture risk reduction, model A costs between $8,850 and $46,940 per quality-adjusted life-year ($/QALY). Additionally, it proved most cost-effective in the age range between 61 and 81 years. The sensitivity analysis established that a reduction of ≥ 2.8% is needed for prophylaxis to be definitely cost-effective. The cost-effectiveness at the secondary prevention level was most sensitive to the cost of the contralateral side’s prophylaxis, the patient’s age, and fracture treatment cost. For high-risk patients with no fracture history, the cost-effectiveness of a preventive strategy depends on their risk profile. In the baseline analysis, the incremental cost-effectiveness ratio at the primary prevention level varied between $11,000/QALY and $74,000/QALY, which is below the defined willingness to pay threshold. Conclusion Due to the high cost of hip fracture treatment and its increased morbidity, surgical prophylaxis strategies have demonstrated that they can significantly relieve the healthcare system. Various key assumptions facilitated the modeling, allowing for adequate room for uncertainty. Further research is needed to evaluate health-state-associated risks. KW - Hip fractures KW - Prevention KW - Geriatric KW - Cost-effectiveness KW - Prophylaxis Y1 - 2023 U6 - https://doi.org/10.1186/s12962-023-00482-4 SN - 1478-7547 N1 - Corresponding author: Momin S. Alnemer IS - 21, Article number: 77 PB - Springer Nature ER - TY - JOUR A1 - Janus, Kevin Alexander A1 - Achtsnicht, Stefan A1 - Drinic, Aleksander A1 - Kopp, Alexander A1 - Keusgen, Michael A1 - Schöning, Michael Josef T1 - Transient magnesium-based thin-film temperature sensor on a flexible, bioabsorbable substrate for future medical applications JF - Applied Research N2 - In this work, the bioabsorbable materials, namely fibroin, polylactide acid (PLA), magnesium and magnesium oxide are investigated for their application as transient, resistive temperature detectors (RTD). For this purpose, a thin-film magnesium-based meander-like electrode is deposited onto a flexible, bioabsorbable substrate (fibroin or PLA) and encapsulated (passivated) by additional magnesium oxide layers on top and below the magnesium-based electrode. The morphology of different layered RTDs is analyzed by scanning electron microscopy. The sensor performance and lifetime of the RTD is characterized both under ambient atmospheric conditions between 30°C and 43°C, and wet tissue-like conditions with a constant temperature regime of 37°C. The latter triggers the degradation process of the magnesium-based layers. The 3-layers RTDs on a PLA substrate could achieve a lifetime of 8.5 h. These sensors also show the best sensor performance under ambient atmospheric conditions with a mean sensitivity of 0.48 Ω/°C ± 0.01 Ω/°C. KW - Silk fibroin KW - Polylactide acid KW - Bioabsorbable KW - Resistive temperature detector Y1 - 2023 U6 - https://doi.org/10.1002/appl.202300102 SN - 2702-4288 (Print) N1 - Corresponding author: Michael Josef Schöning IS - Accepted manuscript PB - Wiley-VCH ER - TY - JOUR A1 - Karschuck, Tobias A1 - Schmidt, Stefan A1 - Achtsnicht, Stefan A1 - Poghossian, Arshak A1 - Wagner, Patrick A1 - Schöning, Michael Josef T1 - Multiplexing system for automated characterization of a capacitive field-effect sensor array JF - Physica Status Solidi A N2 - In comparison to single-analyte devices, multiplexed systems for a multianalyte detection offer a reduced assay time and sample volume, low cost, and high throughput. Herein, a multiplexing platform for an automated quasi-simultaneous characterization of multiple (up to 16) capacitive field-effect sensors by the capacitive–voltage (C–V) and the constant-capacitance (ConCap) mode is presented. The sensors are mounted in a newly designed multicell arrangement with one common reference electrode and are electrically connected to the impedance analyzer via the base station. A Python script for the automated characterization of the sensors executes the user-defined measurement protocol. The developed multiplexing system is tested for pH measurements and the label-free detection of ligand-stabilized, charged gold nanoparticles. KW - Capacitive field-effect sensor KW - Gold nanoparticles KW - Label-free detection KW - Multicell KW - Multiplexing Y1 - 2023 U6 - https://doi.org/10.1002/pssa.202300265 SN - 1862-6300 (Print) SN - 1862-6319 (Online) N1 - Corresponding author: Michael Josef Schöning VL - 220 IS - 22 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Peterson-Oster, Madeleine A1 - Peterson, Leif Arne T1 - Fassadensystem: Optisch ansprechend, freistehend, elementiert und aus Eichenholz JF - Bauen mit Holz, Der Zimmermann N2 - Bei der Entwicklung des Fassadensystems ging es darum die mögliche Dauerhaftigkeit von Holz bei direkter Bewitterung zu maximieren. Gleichzeitig soll gezeigt werden, dass mittels durchdachter Ansätze beim konstruktiven Holzschutz und die Wahl einer geeigneten Holzart langlebige Konstruktionen realisiert werden können. Y1 - 2020 SN - 0005-6545 PB - Rudolf Müller CY - Köln ER - TY - RPRT A1 - Göll, Fabian A1 - Braunstein, Björn A1 - Albracht, Kirsten T1 - Lernende roboterassistierte Systeme für das neuromuskuläre Training - RoSylerNT; Teilvorhaben: Entwicklung eines neuromuskuloskelettalen Modells als Basis für die Interaktionsfähigkeiten autonomer Assistenzsysteme KW - Robotik KW - Rehabilitationsmedizin KW - Neuromuskuläres System KW - Rehabilitatives Training KW - Trainingsgerät Y1 - 2021 U6 - https://doi.org/10.2314/KXP:1855318741 N1 - Förderkennzeichen BMBF 16SV7853 Schlussbericht der Deutschen Sporthochschule Köln für das Vorhaben RoSylerNT Laufzeit: 01.08.2017-31.07.2021 PB - Deutsche Sporthochschule Köln CY - Köln ER - TY - GEN T1 - Ordnung zur Änderung der Ordnung zur Regelung der Einstellung des Bachelorstudiengangs Bauingenieurwesen – Netzingenieur (7-semestrig) und des dualen Bachelorstudiengangs Bauingenieurwesen – Netzingenieur (9-semestrig) im Fachbereich Bauingeieurwesen an der Fachhochschule Aachen T3 - FH-Mitteilungen - 79/2019 KW - Amtliche Mitteilung KW - Änderungsordnung KW - Einstellungsordnung KW - Bachelor KW - Bauingenieurwesen Y1 - 2019 ER - TY - GEN T1 - 2. Ordnung zur Änderung der Studien- und Prüfungsordnung für den Masterstudiengang Bauingenieurwesen – Abschluss Master of Engineering – im Fachbereich Bauingenieurwesen an der Fachhochschule Aachen T3 - FH-Mitteilungen - 80/2019 KW - Amtliche Mitteilung KW - Änderungsordnung KW - Studien- und Prüfungsordnung KW - Master KW - Bauingenieurwesen Y1 - 2019 ER - TY - GEN T1 - Ordnung zur Änderung der Ordnung zur Aufhebung der Studien- und Prüfungsordnung für den Masterstudiengang „Bauingenieurwesen“ vom 10. Dezember 2012 (FH-Mitteilung Nr. 129/2012) in der Fassung der Bekanntmachung der Änderungsordnungen vom 30. Mai 2017 (FH-Mitteilung Nr. 58/2017) an der Fachhochschule Aachen T3 - FH-Mitteilungen - 81/2019 KW - Amtliche Mitteilung KW - Änderungsordnung KW - Studien- und Prüfungsordnung KW - Master KW - Bauingenieurwesen Y1 - 2019 ER - TY - GEN T1 - 2. Ordnung zur Änderung der Studien- und Prüfungsordnung für den Masterstudiengang Facility Management – Abschluss Master of Engineering – im Fachbereich Bauingenieurwesen an der Fachhochschule Aachen T3 - FH-Mitteilungen - 82/2019 KW - Amtliche Mitteilung KW - Änderungsordnung KW - Studien- und Prüfungsordnung KW - Master KW - Bauingenieurwesen Y1 - 2019 ER - TY - GEN T1 - Ordnung zur Änderung der Ordnung zur Aufhebung der Studien- und Prüfungsordnung für den Masterstudiengang „Facility Management“ vom 29. November 2012 (FH-Mitteilung Nr. 127/2012) in der Fassung der Bekanntmachung der Änderungsordnungen vom 3. Februar 2016 (FH-Mitteilung Nr. 10/2016) an der Fachhochschule Aachen T3 - FH-Mitteilungen - 83/2019 KW - Amtliche Mitteilung KW - Änderungsordnung KW - Studien- und Prüfungsordnung KW - Master KW - Facility Management Y1 - 2019 ER - TY - GEN T1 - Studien- und Prüfungsordnung für den Bachelorstudiengang Bauingenieurwesen (7-semestrig), Bachelorstudiengang Bauingenieurwesen mit Praxissemester (8-semestrig) und Bachelorstudiengang Bauingenieurwesen mit Auslandssemester (8-semestrig) Abschluss Bachelor of Engineering T3 - FH-Mitteilungen - 84/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Studien- und Prüfungsordnung KW - Bachelor KW - Bauingenieurwesen Y1 - 2019 ER - TY - CHAP A1 - Steuer-Dankert, Linda T1 - A crazy little thing called sustainability T2 - 51st Annual Conference of the European Society for Engineering Education (SEFI) N2 - Achieving the 17 Sustainable Development Goals (SDGs) set by the United Nations (UN) in 2015 requires global collaboration between different stakeholders. Industry, and in particular engineers who shape industrial developments, have a special role to play as they are confronted with the responsibility to holistically reflect sustainability in industrial processes. This means that, in addition to the technical specifications, engineers must also question the effects of their own actions on an ecological, economic and social level in order to ensure sustainable action and contribute to the achievement of the SDGs. However, this requires competencies that enable engineers to apply all three pillars of sustainability to their own field of activity and to understand the global impact of industrial processes. In this context, it is relevant to understand how industry already reflects sustainability and to identify competences needed for sustainable development. KW - Transformative Competencies KW - Future Skills KW - Transdisciplinarity KW - Interdisciplinarity KW - Sustainability Y1 - 2023 U6 - https://doi.org/10.21427/9CQR-VC94 N1 - 51st Annual Conference of the European Society for Engineering Education, Technological University Dublin, 10th-14th September, 2023 ER - TY - THES A1 - Behrmann, Wieka T1 - GLOW UP. : eine multifunktionale Kinderleuchte zur Förderung der Selbstständigkeit N2 - Durch die Kombination von Merkmalen verschiedener Leuchtentypen erfüllt Glow up eine Vielzahl von Bedürfnissen in unterschiedlichsten Szenarien. Bei einer Nachtwanderung erhellt sie den Weg oder sie spendet Geborgenheit, wenn Kinder sich vor der Dunkelheit beim Einschlafen fürchten. Die Anpassbarkeit der Leuchte steht im Mittelpunkt und ermöglicht die Einstellung von Helligkeit und Lichttemperatur sowie den Wechsel zwischen direktem und indirektem Licht. Mit einer Vielzahl von Befestigungsmöglichkeiten, auswechselbaren Leuchtenschirmen und kindgerechtem Design ist "Glow up" ein wahres Multitalent und ein enger Begleiter im Alltag. KW - Kind KW - Lampe KW - Leuchte KW - nachhaltig KW - Licht Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - THES A1 - Garcia Lange, Ayari T1 - FIELDPRO : Integrated equipment system for traveling journalists N2 - In today's ultra-connected world, the significance of audio-visual documentation is rapidly growing. Technological advancements have made it more accessible to obtain powerful and compact audio-visual equipment, thereby reducing the dependency on a larger team for the documentation process. This has favoured the development of what is known as backpack journalism. This project meets an unmet market need and presents an opportunity for innovative product development. It focuses on backpack journalists working in remote and challenging conditions with unpredictable transportation and working conditions. The proposed backpack design addresses both transport and working setups. Offering a robust and waterproof yet overall lightweight construction for easy equipment carrying, while also providing an extension of the workspace for essential gear. KW - Produktdesign KW - Medienjournalist KW - Rucksack KW - Hardcase KW - Abgelegene Gebiete Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - GEN T1 - Prüfungsordnung für die Bachelorstudiengänge „Elektrotechnik“ und „Elektrotechnik mit Praxissemester“ im Fachbereich Energietechnik an der FH Aachen : vom 10. Oktober 2019 T3 - FH-Mitteilungen - 99/2019 KW - Amtliche Mitteilung KW - Prüfungsordnung KW - Bachelor KW - Elektrotechnik KW - Energietechnik Y1 - 2019 ER - TY - GEN T1 - Ordnung zur Änderung der Gesamtprüfungsordnung für den Bachelorstudiengang „Elektrotechnik mit Orientierungssemester“ an der Fachhochschule Aachen und der RWTH Aachen : vom 10. Oktober 2019 T3 - FH-Mitteilungen - 100/2019 KW - Amtliche Mitteilung KW - Änderungsordnung KW - Gesamtprüfungsordnung KW - Bachelor KW - Elektrotechnik Y1 - 2019 ER - TY - GEN T1 - Gesamtprüfungsordnung für den Bachelorstudiengang „Elektrotechnik mit Orientierungssemester“ an der Fachhochschule Aachen und der RWTH Aachen : vom 21. November 2018 – FH-Mitteilung Nr. 165/2018 in der Fassung der Bekanntmachung der Änderungsordnung vom 10. Oktober 2019 – FH-Mitteilung Nr. 100/2019 (Nichtamtliche lesbare Fassung) T3 - FH-Mitteilungen - 101/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Gesamtprüfungsordnung KW - Bachelor KW - Elektrotechnik Y1 - 2019 ER - TY - GEN T1 - 2. Ordnung zur Änderung der Prüfungsordnung für den Masterstudiengang „Wirtschaftsingenieurwesen“ an der Fachhochschule Aachen : vom 14. Oktober 2019 T3 - FH-Mitteilungen - 102/2019 KW - Amtliche Mitteilung KW - Änderungsordnung KW - Prüfungsordnung KW - Master KW - Wirtschaftsingenieurwesen Y1 - 2023 ER - TY - GEN T1 - Prüfungsordnung für den Masterstudiengang „Wirtschaftsingenieurwesen“ an der Fachhochschule Aachen : vom 11. Dezember 2014 – FH-Mitteilung Nr. 152/2014 in der Fassung der bekanntmachung der Änderungsordnung vom 14. Oktober 2019 – FH-Mitteilung Nr. 102/2019 (Nichtamtliche lesbare Fassung) T3 - FH-Mitteilungen - 103/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Prüfungsordnung KW - Master KW - Wirtschaftsingenieurwesen Y1 - 2019 ER - TY - CHAP A1 - Hüning, Felix A1 - Mund, Cindy T1 - Integration of agile development in standard labs T2 - 51st Annual Conference of the European Society for Engineering Education (SEFI) N2 - In addition to the technical content, modern courses at university should also teach professional skills to enhance the competencies of students towards their future work. The competency driven approach including technical as well as professional skills makes it necessary to find a suitable way for the integration into the corresponding module in a scalable and flexible manner. Agile development, for example, is essential for the development of modern systems and applications and makes use of dedicated professional skills of the team members, like structured group dynamics and communication, to enable the fast and reliable development. This paper presents an easy to integrate and flexible approach to integrate Scrum, an agile development method, into the lab of an existing module. Due to the different role models of Scrum the students have an individual learning success, gain valuable insight into modern system development and strengthen their communication and organization skills. The approach is implemented and evaluated in the module Vehicle Systems, but it can be transferred easily to other technical courses as well. The evaluation of the implementation considers feedback of all stakeholders, students, supervisor and lecturers, and monitors the observations during project lifetime. KW - professional skills KW - active learning KW - lab work KW - Agile development Y1 - 2023 U6 - https://doi.org/10.21427/NK4Z-WS73 N1 - 51st Annual Conference of the European Society for Engineering Education, Technological University Dublin, 10th-14th September, 2023 ER - TY - THES A1 - Özmen, Emel T1 - ALIGN : ein adaptives Regalsystem N2 - „ALIGN“ ist ein smartes Möbelsystem, das den individuellen Lebensstil und die Werte der heutigen Gesellschaft widerspiegelt. Es bietet ausreichend Stauraum und ermöglicht es, Objekte gezielt in Szene zu setzen oder in den Hintergrund zu rücken. Das vielseitige System passt sich an unterschiedliche Raum- und Nutzungsszenarien an. Es ermöglicht die individuelle Gestaltung des Wohnraums nach persönlichen Vorlieben und hilft, den Herausforderungen des modernen Lebens gerecht zu werden. „ALIGN“ – eine passende Lösung für jedes Problem. KW - Regalsystem KW - Nachhaltigkeit KW - Minimalismus KW - Modular KW - Abwechslung Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - El Bergui, Omnia A1 - Abouabdillah, Aziz A1 - Bourioug, Mohamed A1 - Schmitz, Dominik A1 - Biel, Markus A1 - Aboudrare, Abdellah A1 - Krauss, Manuel A1 - Jomaa, Ahlem A1 - Romuli, Sebastian A1 - Müller, Joachim A1 - Fagroud, Mustapha A1 - Bouabid, Rachid T1 - Innovative solutions for drought: Evaluating hydrogel application on onion cultivation (Allium cepa) in Morocco JF - Water N2 - Throughout the last decade, and particularly in 2022, water scarcity has become a critical concern in Morocco and other Mediterranean countries. The lack of rainfall during spring was worsened by a succession of heat waves during the summer. To address this drought, innovative solutions, including the use of new technologies such as hydrogels, will be essential to transform agriculture. This paper presents the findings of a study that evaluated the impact of hydrogel application on onion (Allium cepa) cultivation in Meknes, Morocco. The treatments investigated in this study comprised two different types of hydrogel-based soil additives (Arbovit® polyacrylate and Huminsorb® polyacrylate), applied at two rates (30 and 20 kg/ha), and irrigated at two levels of water supply (100% and 50% of daily crop evapotranspiration; ETc). Two control treatments were included, without hydrogel application and with both water amounts. The experiment was conducted in an open field using a completely randomized design. The results indicated a significant impact of both hydrogel-type dose and water dose on onion plant growth, as evidenced by various vegetation parameters. Among the hydrogels tested, Huminsorb® Polyacrylate produced the most favorable outcomes, with treatment T9 (100%, HP, 30 kg/ha) yielding 70.55 t/ha; this represented an increase of 11 t/ha as compared to the 100% ETc treatment without hydrogel application. Moreover, the combination of hydrogel application with 50% ETc water stress showed promising results, with treatment T4 (HP, 30 kg, 50%) producing almost the same yield as the 100% ETc treatment without hydrogel while saving 208 mm of water. KW - water economy KW - yield KW - deficit irrigation KW - hydrogel KW - onion Y1 - 2023 U6 - https://doi.org/10.3390/w15111972 VL - 15 IS - 11 PB - MDPI CY - Basel ER - TY - PAT A1 - Hüning, Felix T1 - Sensorvorrichtung zur Erfassung eines Magnetfelds sowie magnetbasiertes Sensorsystem zur Erfassung einer Bewegung eines beweglichen Objekts N2 - Eine Sensorvorrichtung (10;110;210;310;410) zur Erfassung eines Magnetfelds, mit einer Wiegand-Sensoreinheit (12;112;212) umfassend: • - mindestens zwei Wiegand-Drähte (20) und • - eine Spulenanordnung (22;122;222), die die mindestens zwei Wiegand-Drähte (20) radial umschließt und die • • • ein Sensorelement (26;126;226) und • • ein Triggerelement (28;128;228), durch das ein Triggermagnetfeld erzeugbar ist, bildet, ist bekannt. Um ein magnetbasiertes Sensorsystem (300;400) zur Erfassung einer Bewegung eines beweglichen Objekts (301;401) zu ermöglichen, das ohne externe Energieversorgung zuverlässig sowie energieeffizient arbeitet und kostengünstig hergestellt werden kann, ist bei der erfindungsgemäßen Sensorvorrichtung (10;110;210;310;410) eine Wiegand-Triggereinheit (14;14a) vorhanden, umfassend: • - einen Wiegand-Draht (30) und • - eine Trigger-Sensorspule (32), die den Wiegand-Draht (30) radial umschließt, wobei ein erstes Ende der Trigger-Sensorspule (32) der Wiegand-Triggereinheit (14;14a) mit einem ersten Ende des Triggerelements (28;128;228) der Wiegand-Sensoreinheit (12;112;212) elektrisch verbunden ist und ein zweites Ende der Trigger-Sensorspule (32) der Wiegand-Triggereinheit (14;14a) mit einem zweiten Ende des Triggerelements (28;128;228) der Wiegand-Sensoreinheit (12;112;212) elektrisch verbunden ist. Auf diese Weise verstärkt ein in der Trigger-Sensorspule (32) erzeugter Impuls das Gesamtmagnetfeld, das auf die Wiegand-Drähte (20) in der Sensoreinheit einwirkt, derart, dass die Triggefeldstärke aller Wiegand-Drähte (20) überschritten wird und diese im wesentlichen zeitgleich auslösen. Y1 - 2023 N1 - Patent WO2023131396A1 ER - TY - JOUR A1 - Timme, Michael T1 - Bauliche Veränderungen durch Wohnungseigentümer und die Zustimmung der Gemeinschaft : Zugleich eine Besprechung des BGH, Urt. v. 17.3.2023 – V ZR 140/22, MDR 2023, 619 JF - Monatsschrift für Deutsches Recht N2 - Durch das WEMoG (Gesetz v. 16.10.2020, BGBl. I 2187) hat der Gesetzgeber die Regelung des § 20 WEG eingeführt. Demnach ist auch für bauliche Veränderungen an Räumen und Flächen, die einem Sondernutzungsrecht unterliegen, die Zustimmung der Gemeinschaft notwendig. Der BGH hat nun mit Urt. v. 17.3.2023 –V ZR 140/22, MDR 2023, 619 deutlich gemacht, dass bei Fehlen eines entsprechenden Beschlusses, die bauliche Veränderung durch einen einzelnen Wohnungseigentümer nicht vorgenommen werden darf, sondern eine rechtswidrige Eigentumsbeeinträchtigung darstellt. Der folgende Beitrag nimmt die Entscheidung zum Anlass, um die neue Rechtslage durch § 20 WEG eingehend zu erläutern. Gleichzeitig werden die Folgen der aktuellen Entscheidung näher dargestellt. Y1 - 2023 SN - 2194-4202 (online) SN - 0340-1812 (print) VL - 77 IS - 13 SP - 815 EP - 818 PB - Verlag Dr. Otto Schmidt CY - Köln ER - TY - GEN T1 - Studien- und Prüfungsordnung für den Bachelorstudiengang Bauingenieurwesen (7-semestrig), Bachelorstudiengang Bauingenieurwesen mit Praxissemester (8-semestrig), Bachelorstudiengang Bauingenieurwesen mit Auslandssemester (8-semestrig) Abschluss Bachelor of Engineering : vom 1. September 2011 – FH-Mitteilung Nr. 76/2011 in der Fassung der Bekanntmachung der Änderungsordnung vom 16. August 2019 – FH-Mitteilung Nr. 74/2019 (Nichtamtliche lesbare Fassung, Studienbeginn WS 2016/17–2017/18) T3 - FH-Mitteilungen - 85/2019 KW - Amtliche Mitteilung KW - Studien- und Prüfungsordnung KW - Lesbare Fassung KW - Bachelor KW - Bauingenieurwesen Y1 - 2019 ER - TY - GEN T1 - Ordnung zur Aufhebung der Studien- und Prüfungsordnung für die Bachelorstudiengänge „Bauingenieurwesen“ (7-semestrig), „Bauingenieurwesen mit Praxissemester“ (8-semestrig) und „Bauingenieurwesen mit Auslandssemester“ (8-semestrig) vom 1. September 2011 (FH-Mitteilung Nr. 76/2011) in der Fassung der Bekanntmachung der Änderungsordnungen vom 22. August 2013 (FH-Mitteilung Nr. 88/2013), 8. Juni 2016 (FH-Mitteilung Nr. 80/2016) und 16. August 2019 (FH-Mitteilung Nr. 74/2019) an der Fachhochschule Aachen : vom 24. Juli 2018 – FH-Mitteilung Nr. 119/2018 in der Fassung der Bekanntmachung der Änderungsordnung vom 16. August 2019 – FH-Mitteilung Nr. 75/2019 (Nichtamtliche lesbare Fassung) T3 - FH-Mitteilungen - 86/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Studien- und Prüfungsordnung KW - Bachelor KW - Bauingenieurwesen Y1 - 2019 ER - TY - GEN T1 - Studien- und Prüfungsordnung des Studiengangs Holzingenieurwesen (7-semestrig) – Abschluss Bachelor of Engineering – im Fachbereich Bauingenieurwesen an der Fachhochschule Aachen : vom 16. Juli 2012 – FH-Mitteilung Nr. 66/2012 in der Fassung der Bekanntmachung der Änderungsordnung vom 16. August 2019 – FH-Mitteilung Nr. 76/2019 (Nichtamtliche lesbare Fassung) T3 - FH-Mitteilungen - 87/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Studien- und Prüfungsordnung KW - Bachelor KW - Holzingenieurwesen Y1 - 2019 ER - TY - GEN T1 - Ordnung zur Aufhebung der Studien- und Prüfungsordnung für den Bachelorstudiengang „Holzingenieurwesen“ (7-semestrig) vom 16. Juli 2012 (FH-Mitteilung Nr. 66/2012) in der Fassung der Bekanntmachung der Änderungsordnungen vom 6. Juli 2016 (FH-Mitteilung Nr. 95/2016) und 16. August 2019 (FH-Mitteilung Nr. 76/2019) an der Fachhochschule Aachen : vom 24. Juli 2018 – FH-Mitteilung Nr. 120/2018 in der Fassung der Bekanntmachung der Änderungsordnung vom 16. August 2019 – FH-Mitteilung Nr. 77/2019 (Nichtamtliche lesbare Fassung) T3 - FH-Mitteilungen - 88/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Studien- und Prüfungsordnung KW - Bachelor KW - Holzingenieurwesen Y1 - 2019 ER - TY - GEN T1 - Studien- und Prüfungsordnung des Studiengangs Bauingenieurwesen – Netzingenieur – Abschluss Bachelor of Engineering – im Fachbereich Bauingenieurwesen an der Fachhochschule Aachen : vom 16. Juli 2012 – FH-Mitteilung Nr. 67/2012 in der Fassung der Bekanntmachung der Änderungsordnung vom 16. August 2019 – FH-Mitteilung Nr. 78/2019 (Nichtamtliche lesbare Fassung | Studienbeginn WS 2011/12–2013/14) T3 - FH-Mitteilungen - 89/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Studien- und Prüfungsordnung KW - Bachelor KW - Bauingenieurwesen Y1 - 2019 ER - TY - GEN T1 - Studien- und Prüfungsordnung für den dualen Bachelorstudiengang Bauingenieurwesen – Netzingenieur (9 Semester) und den Bachelorstudiengang Bauingenieurwesen – Netzingenieur (7 Semester) Abschluss Bachelor of Engineering im Fachbereich Bauingenieurwesen an der Fachhochschule Aachen : vom 16. Juli 2012 – FH-Mitteilung Nr. 67/2012 in der Fassung der Bekanntmachung der Änderungsordnung vom 16. August 2019 – FH-Mitteilung Nr. 78/2019 (Nichtamtliche lesbare Fassung, Studienbeginn WS 2014/15–2016/17) T3 - FH-Mitteilungen - 90/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Studien- und Prüfungsordnung KW - Bachelor KW - Bauingenieurwesen Y1 - 2019 ER - TY - GEN T1 - Studien- und Prüfungsordnung für den dualen Bachelorstudiengang Bauingenieurwesen – Netzingenieur (9 Semester) und den Bachelorstudiengang Bauingenieurwesen – Netzingenieur (7 Semester) Abschluss Bachelor of Engineering im Fachbereich Bauingenieurwesen an der Fachhochschule Aachen : vom 16. Juli 2012 – FH-Mitteilung Nr. 67/2012 in der Fassung der Bekanntmachung der Änderungsordnung vom 16. August 2019 – FH-Mitteilung Nr. 78/2019 (Nichtamtliche lesbare Fassung, Studienbeginn ab WS 2017/18) T3 - FH-Mitteilungen - 91/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Studien- und Prüfungsordnung KW - Bachelor KW - Bauingenieurwesen Y1 - 2019 ER - TY - GEN T1 - Ordnung zur Regelung der Einstellung des Bachelorstudiengangs Bauingenieurwesen – Netzingenieur (7-semestrig) und des dualen Bachelorstudiengangs Bauingenieurwesen – Netzingenieur (9-semestrig) im Fachbereich Bauingeieurwesen an der Fachhochschule Aachen : vom 24. Juli 2018 – FH-Mitteilung Nr. 123/2018 in der Fassung der Bekanntmachung der Änderungsordnung vom 16. August 2019 – FH-Mitteilung Nr. 79/2019 (Nichtamtliche lesbare Fassung) T3 - FH-Mitteilungen - 92/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Einstellungsordnung KW - Bachelor KW - Bauingenieurwesen Y1 - 2019 ER - TY - GEN T1 - Studien- und Prüfungsordnung für den Masterstudiengang Bauingenieurwesen – Abschluss Master of Engineering – im Fachbereich Bauingenieurwesen an der Fachhochschule Aachen : vom 10. Dezember 2012 – FH-Mitteilung Nr. 129/2012 in der Fassung der Bekanntmachung der Änderungsordnung vom 16. August 2019 – FH-Mitteilung Nr. 80/2019 (Nichtamtliche lesbare Fassung) T3 - FH-Mitteilungen - 93/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Studien- und Prüfungsordnung KW - Master KW - Bauingenieurwesen Y1 - 2019 ER - TY - GEN T1 - Ordnung zur Aufhebung der Studien- und Prüfungsordnung für den Masterstudiengang „Bauingenieurwesen“ vom 10. Dezember 2012 (FH-Mitteilung Nr. 129/2012) in der Fassung der Bekanntmachung der Änderungsordnung vom 30. Mai 2017 (FH-Mitteilung Nr. 58/2017) und 16. August 2019 (FH-Mitteilung Nr. 80/2019) an der Fachhochschule Aachen : vom 24. Juli 2018 – FH-Mitteilung Nr. 121/2018 in der Fassung der Bekanntmachung der Änderungsordnung vom 16. August 2019 – FH-Mitteilung Nr. 81/2019 (Nichtamtliche lesbare Fassung) T3 - FH-Mitteilungen - 94/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Studien- und Prüfungsordnung KW - Master KW - Bauingenieurwesen Y1 - 2019 ER - TY - GEN T1 - Studien- und Prüfungsordnung für den Masterstudiengang Facility Management – Abschluss Master of Engineering – : vom 29. November 2012 – FH-Mitteilung Nr. 127/2012 in der Fassung der Bekanntmachung der Änderungsordnung vom 16. August 2019 – FH-Mitteilung Nr. 82/2019 (Nichtamtliche lesbare Fassung, Studienbeginn WS 2012/13–SS 2016) T3 - FH-Mitteilungen - 95/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Studien- und Prüfungsordnung KW - Master KW - Facility Management Y1 - 2019 ER - TY - THES A1 - Kleen, Mareike T1 - Pendelleuchte aus Glas N2 - Glas ist seit jeher ein faszinierender Werkstoff. Es findet Anwendung in zahlreichen Gebieten und bietet als Material für Leuchten eine besondere Eleganz. Die Pendelleuchte „Calice di fiori“ vereint handwerkliche Kunstfertigkeit und komfortables Design. Sie ist aus mundgeblasenem Glas gefertigt und verleiht durch ihre Färbung eine kraftvolle und dynamische Atmosphäre im Raum. Das besondere Merkmal der Pendelleuchte ist eine Öffnung, die eine einfache und intuitive Montage erleichtert. Die Pendelleuchte ist mit energieeffizienten LEDs ausgestattet und lässt sich mit einem Smart-Home-System bedienen. Die Lichtintensität und Lichtfarbe können den individuellen Bedürfnissen angepasst werden. „Calice di fiori“ mit schnell abnehmbarem Leuchtenschirm fügt sich in modern eingerichtete Räume ein und bringt einen Hauch Blütenflair mit sich. KW - Pendelleuchte KW - Glas KW - Smart-Home KW - Intuitiv KW - Blütenkelch Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Kremer, Laura T1 - LittleHabit : die richtige Körperhaltung zur Gewohnheit machen N2 - Der heutige Alltag vieler Menschen ist durch längere Sitz-Einheiten gekennzeichnet, während die körperliche Bewegung vernachlässigt wird. Diese Entwicklung kann einen negativen Einfluss auf die Haltung von Personen und ihre Gesundheit haben. In diesem Fall ist eine korrekte Haltung nicht nur für die körperliche, sondern auch für die psychische Gesundheit von großer Relevanz. Die Bachelorarbeit „LittleHabit“ ermöglicht es, dass bei Kindern die Bewegung nach langen Sitz-Einheiten durch gezieltes Training zur Gewohnheit wird. Hierbei wird zwischen dem Zuhause- und dem Schulbereich differenziert. Zu Hause soll das Kind beim Erledigen der Hausaufgaben durch Animationen und Lichtsignale dazu motiviert werden, Bewegungspausen einzulegen. In der Schule soll dieses Vorhaben in reduzierter Form aufgegriffen und mithilfe von Licht- und Farbsignalen umgesetzt werden. Darüber hinaus fördert es die intrinsische Motivation, sodass Kinder aus eigenem Antrieb ein Interesse dafür entwickeln, sich nach langen Sitz-Einheiten zu bewegen. LittleHabit setzt einen Baustein für die Entwicklung einer gesunden Sitz-Haltung und zielt darauf ab, Haltungsschwächen zu verhindern. KW - Produktdesign KW - Haltungsschwäche KW - Kindererziehung KW - Motivation KW - GewohnheitDerHaltung Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - Abbas, Karim A1 - Hedwig, Lukas A1 - Balc, Nicolae A1 - Bremen, Sebastian T1 - Advanced FFF of PEEK: Infill strategies and material characteristics for rapid tooling JF - Polymers N2 - Traditional vulcanization mold manufacturing is complex, costly, and under pressure due to shorter product lifecycles and diverse variations. Additive manufacturing using Fused Filament Fabrication and high-performance polymers like PEEK offer a promising future in this industry. This study assesses the compressive strength of various infill structures (honeycomb, grid, triangle, cubic, and gyroid) when considering two distinct build directions (Z, XY) to enhance PEEK’s economic and resource efficiency in rapid tooling. A comparison with PETG samples shows the behavior of the infill strategies. Additionally, a proof of concept illustrates the application of a PEEK mold in vulcanization. A peak compressive strength of 135.6 MPa was attained in specimens that were 100% solid and subjected to thermal post-treatment. This corresponds to a 20% strength improvement in the Z direction. In terms of time and mechanical properties, the anisotropic grid and isotropic cubic infill have emerged for use in rapid tooling. Furthermore, the study highlights that reducing the layer thickness from 0.15 mm to 0.1 mm can result in a 15% strength increase. The study unveils the successful utilization of a room-temperature FFF-printed PEEK mold in vulcanization injection molding. The parameters and infill strategies identified in this research enable the resource-efficient FFF printing of PEEK without compromising its strength properties. Using PEEK in rapid tooling allows a cost reduction of up to 70% in tool production. KW - polyetheretherketone (PEEK) KW - rapid tooling KW - infill strategy KW - compression behavior KW - additive manufacturing KW - fused filament fabrication Y1 - 2023 U6 - https://doi.org/10.3390/polym15214293 N1 - This article belongs to the Special Issue "Polymer Materials and Design Processes for Additively Manufactured Products" VL - 2023 IS - 15 PB - MDPI CY - Basel ER - TY - JOUR A1 - Luft, Angela A1 - Luft, Nils A1 - Arntz, Kristian T1 - A basic description logic for service-oriented architecture in factory planning and operational control in the age of industry 4.0 JF - Applied Sciences N2 - Manufacturing companies across multiple industries face an increasingly dynamic and unpredictable environment. This development can be seen on both the market and supply side. To respond to these challenges, manufacturing companies must implement smart manufacturing systems and become more flexible and agile. The flexibility in operational planning regarding the scheduling and sequencing of customer orders needs to be increased and new structures must be implemented in manufacturing systems’ fundamental design as they constitute much of the operational flexibility available. To this end, smart and more flexible solutions for production planning and control (PPC) are developed. However, scheduling or sequencing is often only considered isolated in a predefined stable environment. Moreover, their orientation on the fundamental logic of the existing IT solutions and their applicability in a dynamic environment is limited. This paper presents a conceptual model for a task-based description logic that can be applied to factory planning, technology planning, and operational control. By using service-oriented architectures, the goal is to generate smart manufacturing systems. The logic is designed to allow for easy and automated maintenance. It is compatible with the existing resource and process allocation logic across operational and strategic factory and production planning. KW - manufacturing data model KW - production planning and control KW - manufacturing flexibility KW - technology planning KW - SOA KW - service-oriented architectures KW - factory planning Y1 - 2023 U6 - https://doi.org/10.3390/app13137610 N1 - This article belongs to the Special Issue "Smart Industrial System" VL - 2023 IS - 13 PB - MDPI CY - Basel ER - TY - JOUR A1 - Baader, Fabian A1 - Boxberg, Marc S. A1 - Chen, Qian A1 - Förstner, Roger A1 - Kowalski, Julia A1 - Dachwald, Bernd T1 - Field-test performance of an ice-melting probe in a terrestrial analogue environment JF - Icarus N2 - Melting probes are a proven tool for the exploration of thick ice layers and clean sampling of subglacial water on Earth. Their compact size and ease of operation also make them a key technology for the future exploration of icy moons in our Solar System, most prominently Europa and Enceladus. For both mission planning and hardware engineering, metrics such as efficiency and expected performance in terms of achievable speed, power requirements, and necessary heating power have to be known. Theoretical studies aim at describing thermal losses on the one hand, while laboratory experiments and field tests allow an empirical investigation of the true performance on the other hand. To investigate the practical value of a performance model for the operational performance in extraterrestrial environments, we first contrast measured data from terrestrial field tests on temperate and polythermal glaciers with results from basic heat loss models and a melt trajectory model. For this purpose, we propose conventions for the determination of two different efficiencies that can be applied to both measured data and models. One definition of efficiency is related to the melting head only, while the other definition considers the melting probe as a whole. We also present methods to combine several sources of heat loss for probes with a circular cross-section, and to translate the geometry of probes with a non-circular cross-section to analyse them in the same way. The models were selected in a way that minimizes the need to make assumptions about unknown parameters of the probe or the ice environment. The results indicate that currently used models do not yet reliably reproduce the performance of a probe under realistic conditions. Melting velocities and efficiencies are constantly overestimated by 15 to 50 % in the models, but qualitatively agree with the field test data. Hence, losses are observed, that are not yet covered and quantified by the available loss models. We find that the deviation increases with decreasing ice temperature. We suspect that this mismatch is mainly due to the too restrictive idealization of the probe model and the fact that the probe was not operated in an efficiency-optimized manner during the field tests. With respect to space mission engineering, we find that performance and efficiency models must be used with caution in unknown ice environments, as various ice parameters have a significant effect on the melting process. Some of these are difficult to estimate from afar. Y1 - 2023 U6 - https://doi.org/10.1016/j.icarus.2023.115852 N1 - Forschungsdaten hierzu: "Performance data of an ice-melting probe from field tests in two different ice environments" (https://opus.bibliothek.fh-aachen.de/opus4/frontdoor/index/index/docId/10890) IS - 409 PB - Elsevier CY - Amsterdam ER - TY - GEN T1 - Prüfungsordnung für den dreisemestrigen Masterstudiengang „Industrial Engineering“ an der Fachhochschule Aachen : vom 11. Dezember 2014 – FH-Mitteilung Nr. 154/2014 in der Fassung der Bekanntmachung der Änderungsordnung vom 5. Februar 2019 – FH-Mitteilung Nr. 5/2019 (Nichtamtliche lesbare Fassung | Studienbeginn ab SS 2016) T3 - FH-Mitteilungen - 104/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Prüfungsordnung KW - Master KW - Industrial Engineering Y1 - 2019 ER - TY - GEN T1 - Prüfungsordnung für den dreisemestrigen Masterstudiengang „Industrial Engineering“ an der Fachhochschule Aachen : vom 11. Dezember 2014 – FH-Mitteilung Nr. 154/2014 in der Fassung der Bekanntmachung der Änderungsordnung vom 5. Februar 2019 – FH-Mitteilung Nr. 5/2019 (Nichtamtliche lesbare Fassung | Studienbeginn ab WS 2017/18) T3 - FH-Mitteilungen - 105/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Prüfungsordnung KW - Master KW - Industrial Engineering Y1 - 2019 ER - TY - GEN T1 - Prüfungsordnung für den viersemestrigen Masterstudiengang „Industrial Engineering“ an der Fachhochschule Aachen : vom 11.Dezember 2014 – FH-Mitteilung Nr. 156/2014 in der Fassung der Bekanntmachung der Änderungsordnung vom 5. Februar 2019 – FH-Mitteilung Nr. 6/2019 (Nichtamtliche lesbare Fassung | Studienbeginn ab WS 2015/16) T3 - FH-Mitteilungen - 106/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Prüfungsordnung KW - Master KW - Industrial Engineering Y1 - 2019 ER - TY - GEN T1 - Prüfungsordnung für den viersemestrigen Masterstudiengang „Industrial Engineering“ an der Fachhochschule Aachen : vom 11.Dezember 2014 – FH-Mitteilung Nr. 156/2014 in der Fassung der Bekanntmachung der Änderungsordnung vom 5. Februar 2019 – FH-Mitteilung Nr. 6/2019 (Nichtamtliche lesbare Fassung | Studienbeginn ab WS 2017/18) T3 - FH-Mitteilungen - 107/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Prüfungsordnung KW - Master KW - Industrial Engineering Y1 - 2019 ER - TY - GEN T1 - Prüfungsordnung für den viersemestrigen Masterstudiengang „Industrial Engineering“ Fachbereich Wirtschaftswissenschaften Fachbereich Maschinenbau und Mechatronik an der Fachhochschule Aachen : vom 11. Dezember 2014 – FH-Mitteilung Nr. 156/2014 in der Fassung der Bekanntmachung der Änderungsordnung vom 5. Februar 2019 – FH-Mitteilung Nr. 6/2019 (Nichtamtliche lesbare Fassung | Studienbeginn ab WS 2018/19) T3 - FH-Mitteilungen - 108/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Prüfungsordnung KW - Master KW - Industrial Engineering Y1 - 2019 ER - TY - GEN T1 - 4. Ordnung zur Änderung der Zugangsordnung für den Masterstudiengang Elektrotechnik im Fachbereich Elektrotechnik und Informationstechnik an der Fachhochschule Aachen : vom 5. November 2019 T3 - FH-Mitteilungen - 109/2019 KW - Amtliche Mitteilung KW - Änderungsordnung KW - Zugangsordnung KW - Master KW - Elektrotechnik Y1 - 2019 ER - TY - GEN T1 - Zugangsordnung für die Masterstudiengänge „Elektrotechnik“ und „Elektrotechnik (Teilzeit)“ im Fachbereich Elektrotechnik und Informationstechnik an der Fachhochschule Aachen : vom 22. Januar 2010 – FH-Mitteilung Nr. 6/2010 in der Fassung der Bekanntmachung der Änderungsordnung vom 5. November 2019 – FH-Mitteilung Nr. 109/2019 (Nichtamtliche lesbare Fassung) T3 - FH-Mitteilungen - 110/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Zugangsordnung KW - Master KW - Elektrotechnik Y1 - 2019 ER - TY - GEN T1 - Prüfungsordnung für die Masterstudiengänge „Elektrotechnik“ und „Elektrotechnik (Teilzeit)“ im Fachbereich Elektrotechnik und Informationstechnik an der Fachhochschule Aachen : vom 5. November 2019 T3 - FH-Mitteilungen - 111/2019 KW - Amtliche Mitteilung KW - Prüfungsordnung KW - Master KW - Elektrotechnik KW - Elektrotechnik (Teilzeit) Y1 - 2019 ER - TY - GEN T1 - 4. Ordnung zur Änderung der Zugangsordnung für den Masterstudiengang Information Systems Engineering im Fachbereich Elektrotechnik und Informationstechnik an der Fachhochschule Aachen : vom 5. November 2019 T3 - FH-Mitteilungen - 112/2019 KW - Amtliche Mitteilung KW - Änderungsordnung KW - Zugangsordnung KW - Master KW - Information Systems Engineering Y1 - 2019 ER - TY - GEN T1 - Zugangsordnung für die Masterstudiengänge „Information Systems Engineering“ und „Information Systems Engineering (Teilzeit)“ im Fachbereich Elektrotechnik und Informationstechnik an der Fachhochschule Aachen : vom 22. Januar 2010 – FH-Mitteilung Nr. 4/2010 in der Fassung der Bekanntmachung der Änderungsordnung vom 5. November 2019 – FH-Mitteilung Nr. 112/2019 (Nichtamtliche lesbare Fassung) T3 - FH-Mitteilungen - 113/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Zugangsordnung KW - Master KW - Information Systems Engineering Y1 - 2019 ER - TY - THES A1 - Begas, Philipp T1 - Modulares Regalsystem : Stauraummöbel für den Bereich Office / Homeoffice N2 - Das modulare Regalsystem „MORÉ“ ist ein Stauraummöbel, welches sich im Bereich des (Home) Office einordnet. Das Produkt dient zur Aufbewahrung von Büromaterialien und verbessert die Geräuschkulisse sowie die Beschaffenheit am Arbeitsplatz. Die potenzielle Käufergruppe befindet sich im Alter von 25-67 Jahren, im gewöhnlichen Arbeitsalter Zeitraum (obere Mittelschicht). Im Fokus des Regalsystems steht der besonders freundliche Auf- und Abbau, welcher werkzeuglos erfolgt. Es ist in verschiedene Richtungen erweiterbar (Steckverbindung) und bietet unendlichen Spielraum der Gestaltung. Durch verschiedenfarbige Kennzeichnungen bietet das Regal ein Ordnungssystem, wodurch schnelleres Finden und Sortieren von Unterlagen möglich ist (Grundordnung). Die Rückwände dienen neben der Stabilität als Akustik-/ und Sichtschutz. Das Produkt passt sich jeder Raumsituation individuell an. Ist „MORÉ“ dein nächstes Regalsystem? KW - Modular KW - Steckverbindung KW - Office KW - Erweiterbar KW - Benutzerfreundlich Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - GEN T1 - Ordnung zur Änderung der Prüfungsordnung für die Bachelorstudiengänge „Schienenfahrzeugtechnik“ „Schienenfahrzeugtechnik (Teilzeit)“ und „Dualer Studiengang Schienenfahrzeugtechnik (DIRail)“ im Fachbereich Maschinenbau und Mechatronik an der Fachhochschule Aachen T3 - FH-Mitteilungen - 70/2019 KW - Amtliche Mitteilung KW - Bachelor KW - Prüfungsordnung KW - Änderungsordnung KW - Maschinenbau und Mechatronik Y1 - 2019 ER - TY - GEN T1 - Prüfungsordnung für die Bachelorstudiengänge „Schienenfahrzeugtechnik“ „Schienenfahrzeugtechnik (Teilzeit)“ und „Dualer Studiengang Schienenfahrzeugtechnik (DIRail)“ im Fachbereich Maschinenbau und Mechatronik an der Fachhochschule Aachen T3 - FH-Mitteilungen - 71/2019 KW - Prüfungsordnung KW - Bachelor KW - Maschinenbau und Mechatronik KW - lesbare Fassung Y1 - 2019 ER - TY - GEN T1 - 2. Ordnung zur Änderung der Prüfungsordnung für den dualen ausbildungsintegrierenden Bachelorstudiengang „Physiotherapie“ und den berufsbegleitenden Bachelorstudiengang „Physiotherapie“ an der Fachhochschule Aachen in Kooperation mit der Medizinischen Fakultät der Rheinisch-Westfälisch Technischen Hochschule Aachen und der Physiotherapieschule des Universitätsklinikums Aachen (UK Aachen) T3 - FH-Mitteilungen - 72/2019 KW - Amtliche Mitteilung KW - Änderungsordnung KW - Bachelor KW - Prüfungsordnung KW - Physiotherapie Y1 - 2019 ER - TY - GEN T1 - Prüfungsordnung für den dualen ausbildungsintegrierenden Bachelorstudiengang „Physiotherapie“ und den berufsbegleitenden Bachelorstudiengang „Physiotherapie“ an der Fachhochschule Aachen in Kooperation mit der Medizinischen Fakultät der Rheinisch-Westfälisch Technischen Hochschule Aachen und der Physiotherapieschule des Universitätsklinikums Aachen (UK Aachen) T3 - FH-Mitteilungen - 73/2019 KW - Amtliche Mitteilung KW - Bachelor KW - Prüfungsordnung KW - lesbare Fassung KW - Physiotherapie Y1 - 2019 ER - TY - GEN T1 - 3. Ordnung zur Änderung der Studien- und Prüfungsordnung für den Bachelorstudiengang Bauingenieurwesen (7-semestrig), Bachelorstudiengang Bauingenieurwesen mit Praxissemester (8-semestrig), Bachelorstudiengang Bauingenieurwesen mit Auslandssemester (8-semestrig), Abschluss Bachelor of Engineering T3 - FH-Mitteilungen - 74/2019 KW - Studien- und Prüfungsordnung KW - Änderungsordnung KW - Bachelor KW - Bauingieurwesen KW - Amtliche Mitteilung Y1 - 2019 ER - TY - GEN T1 - Ordnung zur Änderung der Ordnung zur Aufhebung der Studien- und Prüfungsordnung für die Bachelorstudiengänge „Bauingenieurwesen“ (7-semestrig), „Bauingenieurwesen mit Praxissemester“ (8-semestrig) und „Bauingenieurwesen mit Auslandssemester“ (8-semestrig) vom 1. September 2011 (FH-Mitteilung Nr. 76/2011) in der Fassung der Bekanntmachung der Änderungsordnungen vom 22. August 2013 (FH- Mitteilung Nr. 88/2013) und vom 8. Juni 2016 (FH-Mitteilung Nr. 80/2016) an der Fachhochschule Aachen T3 - FH-Mitteilungen - 75/2019 KW - Amtliche Mitteilung KW - Änderungsordnung KW - Studiengangs- und Prüfungsordnung KW - Bauingenieurwesen KW - Bachelor Y1 - 2019 ER - TY - GEN T1 - Ordnung zur Änderung der Ordnung zur Aufhebung der Studien- und Prüfungsordnung für die Bachelorstudiengänge „Bauingenieurwesen“ (7-semestrig), „Bauingenieurwesen mit Praxissemester“ (8-semestrig) und „Bauingenieurwesen mit Auslandssemester“ (8-semestrig) vom 1. September 2011 (FH-Mitteilung Nr. 76/2011) in der Fassung der Bekanntmachung der Änderungsordnungen vom 22. August 2013 (FH- Mitteilung Nr. 88/2013) und vom 8. Juni 2016 (FH-Mitteilung Nr. 80/2016) an der Fachhochschule Aachen T3 - FH-Mitteilungen - 76/2019 KW - Amtliche Mitteilung KW - Studien- und Prüfungsordnung KW - Änderungsordnung KW - Holzingenieurwesen KW - Bachelor Y1 - 2019 ER - TY - GEN T1 - Ordnung zur Änderung der Ordnung zur Aufhebung der Studien- und Prüfungsordnung für den Bachelorstudiengang „Holzingenieurwesen“ (7-semestrig) vom 16. Juli 2012 (FH-Mitteilung Nr. 66/2012) in der Fassung der Bekanntmachung der Änderungsordnung vom 6. Juli 2016 (FH-Mitteilung Nr. 95/2016) an der Fachhochschule Aachen T3 - FH-Mitteilungen - 77/2019 KW - Amtliche Mitteilung KW - Änderungsordnung KW - Studien- und Prüfungsordnung KW - Holzingenieurwesen KW - Bachelor Y1 - 2019 ER - TY - GEN T1 - 3. Ordnung zur Änderung der Studien- und Prüfungsordnung für den dualen Bachelorstudiengang Bauingenieurwesen, Netzingenieur (9 Semester) und den Bachelorstudiengang Bauingenieurwesen – Netzingenieur (7 Semester) Abschluss Bachelor of Engineering im Fachbereich Bauingenieurwesen an der Fachhochschule Aachen T3 - FH-Mitteilungen - 78/2019 KW - Amtliche Mitteilung KW - Änderungsordnung KW - Studien- und Prüfungsordnung KW - Bachelor KW - Bauingenieurwesen Y1 - 2019 ER - TY - GEN A1 - Feldmann, Marco A1 - Francke, Gero A1 - Espe, Clemes A1 - Chen, Qian A1 - Baader, Fabian A1 - Boxberg, Marc S. A1 - Sustrate, Anna-Marie A1 - Kowalski, Julia A1 - Dachwald, Bernd T1 - Performance data of an ice-melting probe from field tests in two different ice environments N2 - This dataset was acquired at field tests of the steerable ice-melting probe "EnEx-IceMole" (Dachwald et al., 2014). A field test in summer 2014 was used to test the melting probe's system, before the probe was shipped to Antarctica, where, in international cooperation with the MIDGE project, the objective of a sampling mission in the southern hemisphere summer 2014/2015 was to return a clean englacial sample from the subglacial brine reservoir supplying the Blood Falls at Taylor Glacier (Badgeley et al., 2017, German et al., 2021). The standardized log-files generated by the IceMole during melting operation include more than 100 operational parameters, housekeeping information, and error states, which are reported to the base station in intervals of 4 s. Occasional packet loss in data transmission resulted in a sparse number of increased sampling intervals, which where compensated for by linear interpolation during post processing. The presented dataset is based on a subset of this data: The penetration distance is calculated based on the ice screw drive encoder signal, providing the rate of rotation, and the screw's thread pitch. The melting speed is calculated from the same data, assuming the rate of rotation to be constant over one sampling interval. The contact force is calculated from the longitudinal screw force, which es measured by strain gauges. The used heating power is calculated from binary states of all heating elements, which can only be either switched on or off. Temperatures are measured at each heating element and averaged for three zones (melting head, side-wall heaters and back-plate heaters). KW - Ocean Worlds KW - Icy Moons KW - Cryobot KW - Analogue Environments KW - Melting Efficiency KW - Melting Performance KW - Melting Probe KW - Ice Melting Y1 - 2022 U6 - https://doi.org/10.5281/zenodo.6094866 N1 - Forschungsdaten zu "Field-test performance of an ice-melting probe in a terrestrial analogue environment" (https://opus.bibliothek.fh-aachen.de/opus4/frontdoor/index/index/docId/10889) ER - TY - JOUR A1 - Uysal, Karya A1 - Firat, Ipek Serat A1 - Creutz, Till A1 - Aydin, Inci Cansu A1 - Artmann, Gerhard A1 - Teusch, Nicole A1 - Temiz Artmann, Aysegül T1 - A novel in vitro wound healing assay using free-standing, ultra-thin PDMS membranes JF - membranes N2 - Advances in polymer science have significantly increased polymer applications in life sciences. We report the use of free-standing, ultra-thin polydimethylsiloxane (PDMS) membranes, called CellDrum, as cell culture substrates for an in vitro wound model. Dermal fibroblast monolayers from 28- and 88-year-old donors were cultured on CellDrums. By using stainless steel balls, circular cell-free areas were created in the cell layer (wounding). Sinusoidal strain of 1 Hz, 5% strain, was applied to membranes for 30 min in 4 sessions. The gap circumference and closure rate of un-stretched samples (controls) and stretched samples were monitored over 4 days to investigate the effects of donor age and mechanical strain on wound closure. A significant decrease in gap circumference and an increase in gap closure rate were observed in trained samples from younger donors and control samples from older donors. In contrast, a significant decrease in gap closure rate and an increase in wound circumference were observed in the trained samples from older donors. Through these results, we propose the model of a cell monolayer on stretchable CellDrums as a practical tool for wound healing research. The combination of biomechanical cell loading in conjunction with analyses such as gene/protein expression seems promising beyond the scope published here. Y1 - 2022 U6 - https://doi.org/10.3390/membranes13010022 N1 - This article belongs to the Special Issue "Latest Scientific Discoveries in Polymer Membranes" VL - 2023 IS - 13(1) PB - MDPI CY - Basel ER - TY - JOUR A1 - Thiebes, Anja Lena A1 - Klein, Sarah A1 - Zingsheim, Jonas A1 - Möller, Georg H. A1 - Gürzing, Stefanie A1 - Reddemann, Manuel A. A1 - Behbahani, Mehdi A1 - Cornelissen, Christian G. T1 - Effervescent atomizer as novel cell spray technology to decrease the gas-to-liquid ratio JF - pharmaceutics N2 - Cell spraying has become a feasible application method for cell therapy and tissue engineering approaches. Different devices have been used with varying success. Often, twin-fluid atomizers are used, which require a high gas velocity for optimal aerosolization characteristics. To decrease the amount and velocity of required air, a custom-made atomizer was designed based on the effervescent principle. Different designs were evaluated regarding spray characteristics and their influence on human adipose-derived mesenchymal stromal cells. The arithmetic mean diameters of the droplets were 15.4–33.5 µm with decreasing diameters for increasing gas-to-liquid ratios. The survival rate was >90% of the control for the lowest gas-to-liquid ratio. For higher ratios, cell survival decreased to approximately 50%. Further experiments were performed with the design, which had shown the highest survival rates. After seven days, no significant differences in metabolic activity were observed. The apoptosis rates were not influenced by aerosolization, while high gas-to-liquid ratios caused increased necrosis levels. Tri-lineage differentiation potential into adipocytes, chondrocytes, and osteoblasts was not negatively influenced by aerosolization. Thus, the effervescent aerosolization principle was proven suitable for cell applications requiring reduced amounts of supplied air. This is the first time an effervescent atomizer was used for cell processing. KW - tri-lineage differentiation KW - survival KW - twin-fluid atomizer KW - adipose-derived stromal cells (ASCs) KW - cell atomization KW - cell aerosolization Y1 - 2022 U6 - https://doi.org/10.3390/pharmaceutics14112421 N1 - This article belongs to the Special Issue "Stromal, Stem, Signaling Cells: The Multiple Roles and Applications of Mesenchymal Cells" VL - 14 IS - 11 PB - MDPI CY - Basel ER - TY - GEN T1 - Studien- und Prüfungsordnung für den Masterstudiengang Facility Management – Abschluss Master of Engineering – : vom 29. November 2012 – FH-Mitteilung Nr. 127/2012 in der Fassung der Bekanntmachung der Änderungsordnung vom 16. August 2019 – FH-Mitteilung Nr. 82/2019 (Nichtamtliche lesbare Fassung | Studienbeginn WS 2016/17–SS 2018) T3 - FH-Mitteilungen - 96/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Studien- und Prüfungsordnung KW - Master KW - Facility Management Y1 - 2019 ER - TY - GEN T1 - Ordnung zur Aufhebung der Studien- und Prüfungsordnung für den Masterstudiengang „Facility Management“ vom 29. November 2012 (FH-Mitteilung Nr. 127/2012) in der Fassung der Bekanntmachung der Änderungsordnungen vom 3. Februar 2016 (FH-Mitteilung Nr. 10/2016) und 16. August 2019 (FH-Mitteilung Nr. 82/2019) an der Fachhochschule Aachen : vom 24. Juli 2018 – FH-Mitteilung Nr. 122/2018 in der Fassung der Bekanntmachung der Änderungsordnung vom 16. August 2019 – FH-Mitteilung Nr. 83/2019 (Nichtamtliche lesbare Fassung) T3 - FH-Mitteilungen - 97/2019 KW - Amtliche Mitteilung KW - Lesbare Fassung KW - Studien- und Prüfungsordnung KW - Master KW - Facility Management Y1 - 2019 ER - TY - GEN T1 - Beitragsordnung des Studierendenwerks Aachen (21. Änderung) : vom 3. Juli 2019 T3 - FH-Mitteilungen - 98/2019 KW - Amtliche Mitteilung KW - Beitragsordnung KW - Studierendenwerk Y1 - 2019 ER - TY - JOUR A1 - Lepke, Dietrich A1 - Lillie, Dirk A1 - Peterson, Leif Arne A1 - Hempe, Thomas T1 - Liegedauer von Holzschwellen in Tunneln der Hamburger Hochbahn AG JF - EI - Der Eisenbahningenieur N2 - Die Hamburger Hochbahn AG benötigte im Rahmen der Überarbeitung einer langfristigen Instandhaltungs- und Erneuerungsstrategie für ihre U-Bahn-Infrastruktur eine belastbare Aussage über die Restlebensdauer der Holzschwellen im Tunnel. Aus diesem Grunde beauftragte sie das Institut für Verkehrswesen, Eisenbahnbau und -betrieb (IVE) der Universität Hannover mit der Erstellung eines entsprechenden Gutachtens. Das Ergebnis führte zu der gesicherten Aussage einer erheblich längeren Restlebensdauer der Tunnelschwellen gegenüber den bisherigen, geschätzten Annahmen. Y1 - 2006 SN - 0013-2810 IS - 2 SP - 46 EP - 50 PB - DVV Media Group CY - Hamburg ER - TY - THES A1 - Peterson, Leif Arne T1 - Zum Tragverhalten nachgiebig verbundener Biegeträger aus Holz N2 - In der vorliegenden Dissertation werden zunächst die linear elastischen Bemessungsmöglichkeiten für nachgiebig verbundene Biegeträger unter statischer und dynamischer Beanspruchung diskutiert. Zum Vergleich wurden praktische Untersuchungen an zweiteiligen Kantholzbiegeträgem mit mechanischen Verbindungsmitteln unterschiedlicher Verformungscharakteristika durchgeführt, ebenso wie umfangreiche Materialprüfungen an den zusammengefügten Einzelquerschnitten. Hierdurch werden die Unterschiede zum realen, nicht elastischen, statischen Tragverhalten aufgezeigt. Der für das dynamische Verhalten maßgebende Systemparameter der Eigenfrequenz wird für mehrteilige Biegeträger theoretisch hinterfragt und an den nachgiebig verbundenen Kantholzbiegeträgem gemessen. Begleitet von weiteren praktischen Untersuchungen an einzelnen Verbindungsmitteln unter Blockscherbeanspruchung wird die rechnerische Berücksichtigung des plastischen Verbindungsmittelverhaltens auf zwei theoretischen Wegen erforscht. Auf Grundlage der Untersuchungen wird ein neues, semianalytisches y-Verfahren entwickelt. Gegenüber den Berechnungen mit finiten Volumen- und Kontakt-Elementen erweist sich das neue Verfahren auf Basis der, um die schubweichen Fugen erweiterten, Balkentheorie als leistungsfähiger. Der Einfluss des plastischen Verbindungsmittelverhaltens wird durch vergleichende Parameterstudien mit diesem neuen Verfahren als vom anerkannten Stand der Technik ausreichend berücksichtigt identifiziert. Für die linear elastische Dimensionierung werden optimierte Verbindungsmittelanordnungen hergeleitet, die durch übersichtliche Ergänzungen zum existierenden Bemessungskonzept des y-Verfahrens eine exaktere Berechnung ermöglichen. Y1 - 2008 SN - 9783816775973 N1 - Berichte des Instituts für Bauphysik, Band 1 PB - Fraunhofer IRB Verlag CY - Stuttgart ER - TY - JOUR A1 - Nabil, F. A1 - Peterson, Leif Arne A1 - Schmidt, A. A1 - Geerdes, D. T1 - Die Holzkuppel des Neuen Palais in Potsdam JF - Bauingenieur Y1 - 2010 SN - 0005-6650 VL - 85 IS - 8 SP - 324 EP - 330 PB - Springer-VDI-Verlag CY - Düsseldorf ER - TY - JOUR A1 - Berg-Postweiler, Julia A1 - Steuer-Dankert, Linda A1 - Leicht-Scholten, Carmen T1 - One size does not fit all: Applying antibias trainings in academia JF - The International Journal of Organizational Diversity N2 - Antibias training is increasingly demanded and practiced in academia and industry to increase employees’ sensitivity to discrimination, racism, and diversity. Under the heading of “Diversity Management,” antibias trainings are mainly offered as one-off workshops intending to raise awareness of unconscious biases, create a diversity-affirming corporate culture, promote awareness of the potential of diversity, and ultimately enable the reflection of diversity in development processes. However, coming from childhood education, research and scientific articles on the sustainable effectiveness of antibias in adulthood, especially in academia, are very scarce. In order to fill this research gap, the article aims to explore how sustainable the effects of individual antibias trainings on participants’ behavior are. In order to investigate this, participant observation in a qualitative pre–post setting was conducted, analyzing antibias training in an academic context. Two observers actively participated in the training sessions and documented the activities and reflection processes of the participants. Overall, the results question the effectiveness of single antibias trainings and show that a target-group adaptive approach is mandatory owing to the background of the approach in early childhood education. Therefore, antibias work needs to be adapted to the target group’s needs and realities of life. Furthermore, the study reveals that single antibias trainings must be embedded in a holistic diversity management approach to stimulate sustainable reflection processes among the target group. This article is one of the first to scientifically evaluate antibias training effectiveness, especially in engineering sciences and the university context. KW - Antibias KW - Diversity Management KW - Organizational Culture KW - Engineering Habitus Y1 - 2023 U6 - https://doi.org/10.18848/2328-6261/CGP/v24i01/1-23 SN - 2328-6261 (Print) SN - 2328-6229 (Online) VL - 24 IS - 1 SP - 1 EP - 23 PB - Common Ground Research Networks ER - TY - THES A1 - Shah, Akshat T1 - Vita : Rehabilitation assistance for digital professionals N2 - Vita ist ein Produkt zur Unterstützung von Physiotherapie und Rehabilitation für moderne digitale Profis. Es hilft beim Aufspüren und Erkennen von Haltungsfehlern und gibt positives und sinnvolles Feedback. Ziel des Feedbacks ist es, ein Gefühl des Vertrauens in den Genesungsprozess zu schaffen und durch die Nachahmung der menschlichen Berührung neue, positive Haltungsgewohnheiten zu entwickeln und zu kultivieren. KW - Haltung KW - Positives Feedback KW - Industriedesign KW - Rehabilitaion KW - Digital Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - BOOK A1 - Nebgen, Nikolaus A1 - Peterson, Leif Arne T1 - Holzbau kompakt nach Eurocode 5 N2 - "Holzbau kompakt" wurde sowohl für Studierende als auch Praktiker konzipiert und beschränkt sich nicht auf reine Holzbauaufgaben, sondern setzt sich ggf. auch mit der Tragwerkslehre auseinander. Die Neuauflage basiert auf dem Eurocode 5 und berücksichtigt zahlreiche neue Erkenntnisse aus Forschung und praxisnaher Entwicklung. Neben den Grundlagen der Bemessung, der Baustoffe, der Dauerhaftigkeit und des Brandschutzes konzentriert sich das Grundlagenwerk besonders auf das Konstruieren mit Holz und Holzwerkstoffen, anschaulich dargestellt an sehr ausführlichen Beispielen für Wohnhaus und Hallentragwerk. Y1 - 2015 SN - 978-3-410-25455-3 PB - Beuth CY - Berlin ET - 5. Auflage ER - TY - BOOK A1 - Holschemacher, Klaus A1 - Peters, Klaus A1 - Peterson, Leif Arne A1 - Schneider, Klaus-Jürgen A1 - Thiele, Ralf T1 - Konstruktiver Ingenieurbau kompakt: Formelsammlung und Bemessungshilfen nach Eurocode für die Bereiche: Lastannahmen, Holzbau, Mauerwerksbau, Stahlbau, Stahlbetonbau, Geotechnik, statische Hinweise N2 - Das kompakte Nachschlagewerk für den konstruktiven Ingenieurbau wurde für den täglichen Gebrauch auf der Baustelle konzipiert und stellt alle für die rechnerische Nachweisführung und Konstruktion von Bauteilen wichtigsten Angaben in Form einer Formelsammlung mit Nachweishilfen zur Verfügung. Der Inhalt wurde auf Basis der neuen Eurocodes komplett aktualisiert und erweitert. Die 4. Auflage enthält in bewährter Manier eine umfangreiche Formelsammlung, Querschnittswerte und Bemessungshilfen zu den Bereichen Lastannahmen, Holzbau, Mauerwerksbau, Stahlbau, Stahlbetonbau, Geotechnik sowie statische Hinweise. Farbiges Papier erleichtert den zielgerichteten Zugriff auf die einzelnen Fachgebiete. Y1 - 2013 SN - 978-3-410-22775-5 PB - Beuth CY - Berlin ET - 4., vollständig überarbeitete Auflage ER - TY - CHAP A1 - Frühwald, Katja A1 - Peterson, Leif Arne A1 - Hasenstab, Andreas ED - Fouad, Nabil A. T1 - Prüfverfahren zur Begutachtung der Materialeigenschaften von Holztragwerken T2 - Bauphysik‐Kalender 2012: Schwerpunkt: Gebäudediagnostik N2 - Dieses Kapitel beinhaltet: - Einleitung - Ausgewählte typische Schäden an Holzbauwerken - Das Material Holz und seine Besonderheiten - Bestandserfassung - Labormethoden - Begutachtungsbeispiele - Zusammenfassung und Schlussfolgerungen - Literatur Y1 - 2012 SN - 9783433029862 (Print) SN - 9783433601235 (Online) U6 - https://doi.org/10.1002/9783433601235.ch4 SP - 103 EP - 155 PB - Ernst & Sohn CY - Berlin ER - TY - THES A1 - Bunar, Moritz T1 - Land Rover Symbiosis : Seegras erforschen und erleben N2 - Seegras wird als „Rohstoff der Zukunft“ betitelt, da es helfen könnte, eine Reihe von globalen Problemen zu bekämpfen. Viele der erhofften Innovationen sind heute aber noch hypothetisch. Außerdem ist das Thema in der westlichen Welt trotz der Neigung zum Klimaschutz kaum bekannt. Die Idee von „Land Rover Symbiosis“ ist ein nachhaltiges Tourismuskonzept, das Forschung und Erlebnisreisen miteinander verknüpft. Auf einer 70m Katamaran Superyacht ist Platz für Forschungszwecke auf der einen und Raum für Expeditionsurlaub auf der anderen Seite. So entsteht ein Verhältnis an Bord, bei dem beide Parteien voneinander profitieren: Wissenschaftler:innen erhalten finanzielle Unterstützung und Kund:innen haben ein klimaneutrales Urlaubserlebnis, bei dem sie hautnah die Vorzüge und Potenziale von Seegras kennenlernen. KW - Seegras KW - Sanfter Tourismus KW - Nachhaltigkeit KW - Superyacht KW - Katamaran Y1 - 2024 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Ernsing, Johanna T1 - Kalle : der mitwachsende Kindertisch N2 - KALLE ist ein mitwachsender Kindertisch, dessen Besonderheit, neben der Höhenverstellung, in der Vergrößerung der Tischplatte liegt. Hierdurch kann KALLE optimal an das Wachstum der Kinder und die sich ändernden Anforderungen angepasst werden. Es ist ein Möbelstück, das die Entwicklung der Kinder begleitet und fördert. Im Gebrauch bezieht sich die Förderung besonders auf die kognitive Entwicklung, die Kreativität und das Sozialverhalten. Darüber hinaus sollen die Kinder mit KALLE aber auch den Umgang mit langlebigen Produkten erlernen, damit sie ein Verständnis für Nachhaltigkeit und ein umweltbewusstes Konsumverhalten entwickeln. KW - Mitwachsender Kindertisch KW - Kindertisch KW - Jugendtisch KW - Kreativitätsförderung KW - Konsumreduzierung Y1 - 2024 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - GEN A1 - Braun, Lena A1 - Krafft, Simone A1 - Tippkötter, Nils T1 - Combined supercritical carbon dioxide extraction and chromatography of the algae fatty linoleic and linolenic acid T2 - Chemie Ingenieur Technik N2 - A method for the integrated extraction and separation of fatty acids from algae using supercritical CO2 is presented. Desmodesmus obliquus and Chlorella sorokiniana were used as algae. First, a method for chromatographic separation of fatty acids of different degrees of saturation was established and optimized. Then, an integrated method for supercritical extraction was developed for both algal species. It was also verified whether prior cell disruption was beneficial for extraction. In developing the method for chromatographic separation, statistical experimental design was used to determine the optimal parameter settings. The methanol content in the mobile phase proved to be the most important parameter for successful separation of the three unsaturated fatty acids oleic acid, linoleic acid, and linolenic acid. Supercritical extraction with dried algae showed that about four times more fatty acids can be extracted from C. sorokiniana relative to the dry mass used. Y1 - 2022 U6 - https://doi.org/10.1002/cite.202255308 SN - 0009-286X SN - 1522-2640 (eISSN) N1 - ProcessNet and DECHEMA‐BioTechNet Jahrestagungen 2022 together with 13th ESBES Symposium 2022, 12. - 15. September 2022, Eurogress Aachen VL - 94 IS - 9 SP - 1304 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Krafft, Simone A1 - Kuka, Katrin A1 - Ulber, Roland A1 - Tippkötter, Nils T1 - Utilization of Lolium perenne varieties as a renewable substrate for single-cell proteins, lactate, and composite materials T2 - Chemie Ingenieur Technik N2 - Lolium perenne (perennial ryegrass) is aproductive and high-quality forage grass indigenous to Southern Europe, temperate Asia, and North Africa. Nowadays it is widespread and the dominant grass species on green areas in temperate climates. This abundant source of biomass is suitable for the development of bioeconomic processes because of its high cellulose and water-soluble carbohydrate content. In this work, novel breeds of the perennial ryegrass are being examined with regards to their quality parameters and biotechnological utilization options within the context of bioeconomy. Three processing operations are presented. In the first process, the perennial ryegrass is pretreated by pressing or hydrothermal extraction to derive glucosevia subsequent enzymatic hydrolysis of cellulose. A yield of up to 82 % glucose was achieved when using the hydrothermal ex-traction as pretreatment. In a second process, the ryegrass is used to produce lactic acid in high concentrations. The influence of the growth conditions and the cutting time on the carboxylic acid yield is investigated. A yield of lactic acid of above 150 g kg⁻¹ dry matter was achieved. The third process is to use Lolium perenne as a substrate in the fermentation of K. marxianus for the microbial production of single-cell proteins. The perennial ryegrass is screw-pressed and the press juice is used as medium. When supplementing the press juice with yeast media components, a biomass concentration of up to 16 g L⁻¹ could be achieved. Y1 - 2022 U6 - https://doi.org/10.1002/cite.202255306 SN - 0009-286X SN - 1522-2640 (eISSN) N1 - ProcessNet and DECHEMA‐BioTechNet Jahrestagungen 2022 together with 13th ESBES Symposium 2022, 12. - 15. September 2022, Eurogress Aachen VL - 94 IS - 9 SP - 1303 EP - 1304 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Varriale, Ludovica A1 - Kuka, Katrin A1 - Tippkötter, Nils A1 - Ulber, Roland T1 - Use of a green biomass in a biorefinery platform T2 - Chemie Ingenieur Technik N2 - The emerging environmental issues due to the use of fossil resources are encouraging the exploration of new renewable resources. Biomasses are attracting more interest due to the low environmental impacts, low costs, and high availability on earth. In this scenario, green biorefineries are a promising platform in which green biomasses are used as feedstock. Grasses are mainly composed of cellulose and hemicellulose, and lignin is available in a small amount. In this work, a perennial ryegrass was used as feedstock to develop a green bio-refinery platform. Firstly, the grass was mechanically pretreated, thus obtaining a press juice and a press cake fraction. The press juice has high nutritional values and can be employed as part of fermentation media. The press cake can be employed as a substrate either in enzymatic hydrolysis or in solid-state fermentation. The overall aim of this work was to demonstrate different applications of both the liquid and the solid fractions. For this purpose, the filamentous fungus A. niger and the yeast Y. lipolythica were selected for their ability to produce citric acid. Finally, the possibility was assessed to use the press juice as part of fermentation media to cultivate S. cerevisiae and lactic acid bacteria for ethanol and lactic acid fermentation. Y1 - 2022 U6 - https://doi.org/10.1002/cite.202255095 SN - 0009-286X SN - 1522-2640 (eISSN) N1 - ProcessNet and DECHEMA‐BioTechNet Jahrestagungen 2022 together with 13th ESBES Symposium 2022, 12. - 15. September 2022, Eurogress Aachen VL - 94 IS - 9 SP - 1299 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Rothkranz, Berit A1 - Krafft, Simone A1 - Tippkötter, Nils T1 - Media optimization for sustainable fuel production: How to produce biohydrogen from renewable resources with Thermotoga neapolitana T2 - Chemie Ingenieur Technik N2 - Hydrogen is playing an increasingly important role in research and politics as an energy carrier of the future. Since hydrogen has commonly been produced from methane by steam reforming, the need for climate-friendly, alternative production routes is emerging. In addition to electrolysis, fermentative routes for the production of so-called biohydrogen are "green" alternatives. The application of microorganisms offers the advantage of sustainable production from renewable resources using easily manageable technologies. In this project, the hyperthermophilic, anaerobic microorganism Thermotoga neapolitana is used for the productio nof biohydrogen from renewable resources. The enzymatically hydrolyzed resources were used in fermentation leading to yield coefficients of 1.8 mole H₂ per mole glucose when using hydrolyzed straw and ryegrass supplemented with medium, respectively. These results are similar to the hydrogen yields when using Thermotoga basal medium with glucose (TBGY) as control group. In order to minimize the supplementation of the hydrolysate and thus increase the economic efficiency of the process, the essential media components were identified. The experiments revealed NaCl, KCl, and glucose as essential components for cell growth as well as biohydrogen production. When excluding NaCl, a decrease of 96% in hydrogen production occured. Y1 - 2022 U6 - https://doi.org/10.1002/cite.202255305 SN - 0009-286X SN - 1522-2640 (eISSN) N1 - ProcessNet and DECHEMA‐BioTechNet Jahrestagungen 2022 together with 13th ESBES Symposium 2022, 12. - 15. September 2022, Eurogress Aachen VL - 94 IS - 9 SP - 1298 EP - 1299 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Waiczies, Helmar A1 - Kühne, André A1 - Winter, Lukas A1 - Frauenrath, Tobias A1 - Hoffmann, Werner A1 - Ittermann, Bernd A1 - Waiczies, Sonia A1 - Niendorf, Thoralf T1 - Towards theranostics of rheumatoid arthritis: 1H/19F imaging of non-steroidal anti-inflammatory drugs in hand and wrist at 7 Tesla T2 - 2013 ISMRM Annual Meeting Proceedings N2 - We have developed a double-tuned ¹H/¹⁹F birdcage resonator dedicated for hand and wrist imaging at 7 T to locally image non-steroidal anti-inflammatory drugs (NSAID) such as 2-{[3-(Trifluoromethyl) phenyl]amino}benzoic acid. The preliminary in vivo images acquired by the double-tuned ¹H/¹⁹F birdcage resonator demonstrate the feasibility for ¹H/¹⁹F hand- and wrist-imaging at 7 T. While the diagnostic quality of the coil needs to be assessed in patients with inflammatory rheumatoid disease, first ¹⁹F images of the NSAID are encouraging, and point towards the prospect of applying ¹⁹F-MRI to visualize and quantify the concentration of therapeutically-active compound at the sites of inflammation. Y1 - 2013 SN - 1545-4428 N1 - ISMRM 21st Annual Meeting & Exhibition, 20-26 April 2013, Salt Lake City, Utah, USA ER - TY - GEN A1 - Lindel, Tomasz Dawid A1 - Greiser, Andreas A1 - Waxman, Patrick A1 - Dietterle, Martin A1 - Seifert, Frank A1 - Fontius, Ulrich A1 - Renz, Wolfgang A1 - Dieringer, Matthias A. A1 - Frauenrath, Tobias A1 - Schulz-Menger, Jeanette A1 - Niendorf, Thoralf A1 - Ittermann, Bernd T1 - Cardiac CINE MRI at 7 T using a transmit array T2 - 2012 ISMRM Annual Meeting Proceedings N2 - With its need for high SNR and short acquisition times, Cardiac MRI (CMR) is an intriguing target application for ultrahigh field MRI. Due to the sheer size of the upper torso, however, the known RF issues of 7T MRI are also most prominent in CMR. Recent years brought substantial progress but the full potential of the ultrahigh field for CMR is yet to be exploited. Parallel transmission (pTx) is a promising approach in this context and several groups have already reported B1 shimming for 7T CMR. In such a static pTx application amplitudes and phases of all Tx channels are adjusted individually but otherwise imaging techniques established in current clinical practice 1.5 T and 3 T are applied. More advanced forms of pTx as spatially selective excitation (SSE) using Transmit SENSE promise additional benefits like faster imaging with reduced fields of view or improved SAR control. SSE requires the full dynamic capabilities of pTx, however, and for the majority of today's implemented pTx hardware the internal synchronization of the Tx array does not easily permit external triggering as needed for CMR. Here we report a software solution to this problem and demonstrate the feasibility of CINE CMR at 7 T using a Tx array. Y1 - 2012 SN - 1545-4428 N1 - ISMRM 20th Annual Meeting & Exhibition, 5-11 May 2012, Melbourne, Australia ER - TY - JOUR A1 - Timme, Michael T1 - Kaufvertrag: Das Zusammentreffen von Beschaffenheitsvereinbarung und Gewährleistungsausschluss – ein Spannungsverhältnis JF - Monatsschrift für Deutsches Recht N2 - Wer A sagt, muss zumindest im Kaufrecht nicht immer B sagen: Es kommt nicht selten vor, dass sich in einem Kaufvertrag einerseits ein wirksamer Ausschluss der Gewährleistung des Verkäufers für Sachmängel findet, die Parteien aber andererseits gleichwohl eine Beschaffenheitsvereinbarung für bestimmte Eigenschaften vertraglich festlegen. In diesem Problemfeld führt eine aktuelle Entscheidung des BGH zu weiteren Klärungen für die Praxis (BGH, Urt. v. 10.4.2024 – VIII ZR 161/23, MDR 2024, 706). Der folgende Beitrag setzt sich mit den vielfältigen Aspekten der Entscheidung auseinander und erläutert, aus welchen Gründen der BGH dem Käufer einige goldene Brücken für einen Schadensersatzanspruch gebaut hat. Y1 - 2024 U6 - https://doi.org/10.9785/mdtr-2024-781203 SN - 2194-4202 (online) SN - 0340-1812 (print) VL - 78 IS - 12 SP - 745 EP - 748 PB - Verlag Dr. Otto Schmidt CY - Köln ER - TY - RPRT A1 - Tippkötter, Nils T1 - TreBec - Herstellung eines Mehrwegbechers aus Treber : Sachbericht zum Verwendungsnachweis N2 - Laufzeit des Vorhabens und Berichtszeitraum: 01.10.2020-30.09.2021 Y1 - 2021 U6 - https://doi.org/10.2314/KXP:1858723302 N1 - Förderkennzeichen BMBF 031B1037 PB - FH Aachen CY - Jülich ER - TY - THES A1 - Brauweiler, Philipp T1 - incontrare : Gestaltung eines Meeting Raumes durch Konzeptmöbel N2 - Incontrare, was übersetzt Begegnung bedeutet, ist ein Konferenztischkonzept, der durch seinen modularen Aufbau heraus sticht. Dem Kunden ist es möglich das Produkt mit einem einzigen Werkzeug - fünfer Imbusschlüssel - aufzubauen. Der modulare Aufbau bietet die Möglichkeit kundenorientiert ein Produkt zusammensetzen zu können. Incontrare bietet hierdurch eine Vielzahl an Variationen, die nicht nur die gestalterischen Aspekte anspricht, sondern auch verschiedene Preisklassen abdeckt. Incontrare ist ein Tischkonzept, das sowohl im niederpreisigen , sowie auch im HighEnd Bereich funktioniert. KW - Begegnung KW - Verschieben KW - Stimmung KW - Regalkonzept KW - Imbussschlüssel Y1 - 2024 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - Özsoylu, Dua A1 - Aliazizi, Fereshteh A1 - Wagner, Patrick A1 - Schöning, Michael Josef T1 - Template bacteria-free fabrication of surface imprinted polymer-based biosensor for E. coli detection using photolithographic mimics: Hacking bacterial adhesion JF - Biosensors and Bioelectronics N2 - As one class of molecular imprinted polymers (MIPs), surface imprinted polymer (SIP)-based biosensors show great potential in direct whole-bacteria detection. Micro-contact imprinting, that involves stamping the template bacteria immobilized on a substrate into a pre-polymerized polymer matrix, is the most straightforward and prominent method to obtain SIP-based biosensors. However, the major drawbacks of the method arise from the requirement for fresh template bacteria and often non-reproducible bacteria distribution on the stamp substrate. Herein, we developed a positive master stamp containing photolithographic mimics of the template bacteria (E. coli) enabling reproducible fabrication of biomimetic SIP-based biosensors without the need for the “real” bacteria cells. By using atomic force and scanning electron microscopy imaging techniques, respectively, the E. coli-capturing ability of the SIP samples was tested, and compared with non-imprinted polymer (NIP)-based samples and control SIP samples, in which the cavity geometry does not match with E. coli cells. It was revealed that the presence of the biomimetic E. coli imprints with a specifically designed geometry increases the sensor E. coli-capturing ability by an “imprinting factor” of about 3. These findings show the importance of geometry-guided physical recognition in bacterial detection using SIP-based biosensors. In addition, this imprinting strategy was employed to interdigitated electrodes and QCM (quartz crystal microbalance) chips. E. coli detection performance of the sensors was demonstrated with electrochemical impedance spectroscopy (EIS) and QCM measurements with dissipation monitoring technique (QCM-D). KW - Surface imprinted polymer KW - E. coli detection KW - Photolithographic mimics KW - Master stamp KW - Quartz crystal microbalance Y1 - 2024 U6 - https://doi.org/10.1016/j.bios.2024.116491 SN - 1873-4235 (eISSN) SN - 0956-5663 N1 - Corresponding author: Michael J. Schöning VL - 261 PB - Elsevier CY - Amsterdam ER - TY - CHAP A1 - Niendorf, Thoralf A1 - Winter, Lukas A1 - Frauenrath, Tobias ED - Millis, Richard T1 - Electrocardiogram in an MRI environment: Clinical needs, practical considerations, safety implications, technical solutions and fFuture directions T2 - Advances in Electrocardiograms - Methods and Analysis Y1 - 2012 SN - 978-953-307-923-3 (print) SN - 978-953-51-6762-4 (eBook) U6 - https://doi.org/10.5772/24340 SP - 309 EP - 324 PB - IntechOpen CY - London ER - TY - GEN A1 - Sieker, T. A1 - Tippkötter, Nils A1 - Ulber, Roland A1 - Bart, H.-J. A1 - Heinzle, E. T1 - Grüne Bioraffinerie: Ganzheitliche Nutzung von Grassilage für die Herstellung von Grund-und Feinchemikalien T2 - Chemie Ingenieur Technik N2 - Gras hat ein hohes Potenzial als nachwachsender Rohstoff. Bei ungeeigneter Lagerung verderben Gräser allerdings innerhalb weniger Tage. Dieser Nachteil kann durch die Silierung des Grasschnittes behoben werden. Eines der wichtigsten in der Silage enthaltenen Produkte ist die Milchsäure. Um diese für weitere Aufarbeitungsschritte zugänglich zu machen, wird aus der Silage ein Presssaft hergestellt. Die Milchsäure wird aus einem Silagepresssaft mittels Extraktion durch ionische Flüssigkeiten isoliert. Dabei wird zum einen eine reine Milchsäure hergestellt, die z. B. für die Herstellung von Polymilchsäure genutzt werden kann. Zum anderen wird ein weniger aufgereinigter Extrakt gewonnen, der für die fermentative Produktion von L-Lysin und 1,2-Propandiol genutzt werden soll. Im Rahmen des Projekts erfolgt die gentechnische Optimierung von Corynebacterium glutamicum für die Umsetzung von Milchsäurezu L-Lysin. Die im nach der Pressung verbleibenden Presskuchen enthaltenen Grasfasern bestehen zu einem großen Teil aus Polysacchariden. Diese werden hydrolysiert und die dabei freigesetzten Zucker zu Grundchemikalien wie Ethanol oder Itakonsäure fermentiert. Im Rahmen einer vollständigen Nutzung der Silage wird das Raffinat aus der Milchsäureextraktion als Mediumsupplement in der Fermentation eingesetzt, was die Zugabe weiterer Medienbestandteile überflüssig macht. Die Rückstände der Hydrolysen und Fermentationen sollen darüberhinaus für die Herstellung von Biogas genutzt werden. Y1 - 2010 U6 - https://doi.org/10.1002/cite.201050321 SN - 0009-286X SN - 1522-2640 (eISSN) N1 - ProcessNet-Jahrestagung 2010 und 28. DECHEMA-Jahrestagung der Biotechnologen, 21. - 23. September 2010, Eurogress Aachen VL - 82 IS - 9 SP - 1564 PB - Wiley-VCH CY - Weinheim ER - TY - CHAP A1 - Engel, Mareike A1 - Thieringer, Julia A1 - Tippkötter, Nils T1 - Linking bioprocess engineering and electrochemistry for sustainable biofuel production T2 - Young Researchers Symposium, YRS 2016. Proceedings N2 - Electromicrobial engineering is an emerging, highly interdisciplinary research area linking bioprocesses with electrochemistry. In this work, microbial electrosynthesis (MES) of biobutanol is carried out during acetone-butanol-ethanol (ABE) fermentations with Clostridium acetobutylicum. A constant electric potential of −600mV (vs. Ag/AgCl) with simultaneous addition of the soluble redox mediator neutral red is used in order to study the electron transfer between the working electrode and the bacterial cells. The results show an earlier initiation of solvent production for all fermentations with applied potential compared to the conventional ABE fermentation. The f inal butanol concentration can be more than doubled by the application of a negative potential combined with addition of neutral red. Moreover a higher biofilm formation on the working electrode compared to control cultivations has been observed. In contrast to previous studies, our results also indicate that direct electron transfer (DET) might be possible with C. acetobutylicum. The presented results make microbial butanol production economically attractive and therefore support the development of sustainable production processes in the chemical industry aspired by the “Centre for resource-efficient chemistry and raw material change” as well as the the project “NanoKat” working on nanostructured catalysts in Kaiserslautern. Y1 - 2016 N1 - Young Researchers Symposium, YRS 2016, 14th - 15th April 2016, Fraunhofer-Zentrum Kaiserslautern SP - 49 EP - 53 PB - Fraunhofer Verlag CY - Karlsruhe ER - TY - GEN A1 - Tippkötter, Nils A1 - Neitmann, E. A1 - Sohling, U. A1 - Ruf, F. A1 - Ulber, Roland T1 - Anaerobe Produktion von ABE-Lösungsmitteln aus an Bleicherde adsorbiertem Öl T2 - Chemie Ingenieur Technik N2 - Mit Palmöl beladene Bleicherde wurde auf die Anwendbarkeit als Rohstoff zur Bildung von Aceton, Ethanol und Butanol (ABE) untersucht. Nach der Abtrennung des entfärbten bzw. gebleichten Öls bestehen 20–40 % (w/w) des Bleicherderückstands aus adsorbiertem Öl. Somit stellt das Mineral einen wertvollen Rohstoff dar. Zur Produktion der Lösungsmittel wurde das gebundene Öl hydrolysiert. Das freigesetzte Glycerin diente als Substrat einer nachfolgenden anaeroben Fermentation zu den ABE-Lösungsmitteln. Die Fermentationen wurden mit verschiedenen Clostridien-Stämmen durchgeführt, von denen einige lipolytische Aktivität aufweisen. Der Ölgehalt der Bleicherde betrug 28 % der Adsorbermasse. Für die Hydrolyse wurden drei Ansätze untersucht: 1. die direkte Fermentation des Adsorbers mit lipolytisch aktiven Clostridien, 2. der Einsatz von Lipasen und die Fermentation des resultierenden Überstands und 3. die Kofermentation mit einer lipolytisch aktiven Hefe. Jeder der drei Ansätze führte zu einerHydrolyse des Öls und Wachstum der Mikroorganismen. Der Einsatz von Lipasen resultierte in einer vollständigen und der schnellsten Hydrolyse des Öls. Eine Glycerinkonzentration von 13,4 g/L konnte erreicht werden. Die anaerobe Fermentation der verschiedenen Clostridien auf Minimalmedien verlief erfolgreich. Der Vergleich der Fermentationen der Bleicherdehydrolysate zeigte, dass das Hydrolysat wachstumsinhibierende Substanzen enthält. Unter diesen Bedingungen konnte eine Ausbeute von Y P/S = 0,11 erzielt werden. Der Einsatz eines Ionenaustauschers zur Reinigung des Hydrolysats vor der Fermentation resultierte in einer Verbesserung des Wachstums Y1 - 2009 U6 - https://doi.org/10.1002/cite.200950075 SN - 0009-286X SN - 1522-2640 (eISSN) N1 - ProcessNet‐Jahrestagung 2009 und 27. DECHEMA-Jahrestagung der Biotechnologen, 8.- 10. September 2009, Mannheim VL - 81 IS - 8 SP - 1217 EP - 1218 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Tippkötter, Nils A1 - Maurer, S. A1 - Pasteur, A. A1 - Kampeis, P. A1 - Ulber, Roland T1 - Hochgradient-Magnetseparation von Fermentationsprodukten–FEM Simulation der Filtermatrix T2 - Chemie Ingenieur Technik N2 - Durch den Einsatz magnetisierbarer Partikel lassen sich Stoffwechselprodukte direkt und selektiv aus feststoffreichen Fermentationssuspensionen abtrennen. Im Gegensatz zu klassischen Adsorbermaterialien können magnetisierbare Partikel mit sehr geringen Durchmessern verwendet werden. Zur deren Abtrennung ist jedoch ein hoher Magnetfeldgradient notwendig. Dieser wird in der Regel durch in der Trennkammer bzw. dem Magnetfeld eingebrachte magnetisierbare Drähte realisiert. Bei der Auslegung der Drahtgitter ist ein Kompromiss zwischen Abtrennrate und Durchlässigkeit nötig. Die Ausrichtung der Drähte in Relation zum Magnetfeld, deren Abstand sowie die geometrische Anordnung können hierbei variiert werden. Zum Verständnis der Einflüsse auf das sich ausbildende Magnetfeld und die Fluiddynamik wurden Simulationen mit der Finite-Elemente-Methode durchgeführt und experimentell überprüft. Hierfür wurden die Drähte unter Variation von Anzahl, Richtung und Anordnung in den Hochgradient-Magnetseparator eingebracht. Erste Verifizierungen der Simulationen zeigen, dass die in Magnetfeldrichtung ausgerichteten Drähte (x-Achse) über die geringste Partikelrückhaltefähigkeit verfügen. Die Drähte der y- und z-Achse halten den größten Anteil der Magnetpartikel zurück, wobei die Drähte in y-Richtung den höchsten Feldgradienten ausbilden. Des Weiteren konnte gezeigt werden, dass eine rhomboedrische Drahtanordnung der kubischen vorzuziehen ist. Y1 - 2010 U6 - https://doi.org/10.1002/cite.201050217 SN - 0009-286X SN - 1522-2640 (eISSN) N1 - ProcessNet-Jahrestagung 2010 und 28. DECHEMA-Jahrestagung der Biotechnologen, 21. - 23. September 2010, Eurogress Aachen VL - 82 IS - 9 SP - 1361 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Duwe, A. A1 - Schlegel, C. A1 - Tippkötter, Nils A1 - Ulber, Roland T1 - Sequentielle Extraktion von Cellulose zur effizienten Nutzung der Stoffströme in der Holzbioraffinerie T2 - Chemie Ingenieur Technik N2 - In der Reihe der nachwachsenden Rohstoffe besitzt Holz als erneuerbare und umweltfreundliche Ressource ein großes Potenzial. Über 11 Mio. ha Holz, das laut der Fachagentur für nachwachsende Rohstoffe (FNR) auch für industrielle Zwecke genutzt werden kann, wuchsen im Jahr 2013 allein auf bundesdeutscher Fläche. 56,8 Mio. m³ jährlicher Holzeinschlag in den letzten zehn Jahren wurde zu knapp der Hälfte stofflich und der Rest energetisch verwertet. Im Rahmen dieser Arbeit konnte auf der Basis vom Holz der Buche, die nach Fichte und Kiefer die dritthäufigste Baumart in Deutschland ist und 15% der deutschen Waldfläche ausmacht, die Fraktionierung der polymeren Hauptbestandteile mit niedrigem energetischen Einsatz erreicht werden. Hierbei werden in einem nachgeschalteten Extraktionsprozess die beiden Komponenten Hemicellulose und Lignin in flüssiger Form von der finalen festen Cellulosefraktion abgetrennt. Die Extraktion der Hemicellulose erfolgt durch eine Liquid Hot Water (LHW)-Behandlung. Untersucht wird der katalytische Zusatz anorganischer Säuren wie H₃PO₄ und H₂SO₄. Im Hinblick auf die weitere Verwertung von Lignin zu aromatischen Synthesebausteinen kommt die Organosolv-Extraktion mit einem Ethanol/Wasser-Gemisch zum Einsatz. Von Vorteil ist die weitere Verwendung beider Stoffströme ohne Fällungsschritt und nachteiliger Verdünnung der Hemicellulose. Y1 - 2014 U6 - https://doi.org/10.1002/cite.201450308 SN - 0009-286X SN - 1522-2640 (eISSN) N1 - ProcessNet-Jahrestagung 2014 und 31. DECHEMA-Jahrestagung der Biotechnologen, 30. September - 2. Oktober 2014, Eurogress Aachen VL - 86 IS - 9 SP - 1400 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Möhring, S. A1 - Wulfhorst, H. A1 - Capitain, C. A1 - Roth, J. A1 - Tippkötter, Nils T1 - Fractioning of lignocellulosic biomass: Scale-down and automation of thermal pretreatment for parameter optimization T2 - Chemie Ingenieur Technik N2 - In order to efficiently convert lignocellulose, it is often necessary to conduct a pretreatment. The biomass considered in this study typically comprises of agricultural and horticultural residues, as well as beechwood. A very environmentally friendly method, namely, fungal pretreatment using white-rot fungi, leads to an enhanced enzymatic hydrolysis. In contrast to other processes presented, the energy input is extremely low. However, the fungal growth on the lignocellulosic substrates takes several weeks at least in order to be effective. Thus, the reduction of chemicals and energy for thermal processing is a target of our current research. Liquid hot water (LHW) and solvent-based pretreatment (OrganoSolv) require more complex equipment, as they depend on high temperatures (160 – 180 °C) and enhanced pressure (up to 20 bar). However, they prove to be promising processes in regard to the fractioning of lignocellulose. For optimal lignin recovery the parameters differ from those established in cellulose extraction. A novel screening system scaled down to a reaction volume of 100 mL has been developed and successfully tested for this purpose. Y1 - 2016 U6 - https://doi.org/10.1002/cite.201650288 SN - 0009-286X SN - 1522-2640 (eISSN) N1 - ProcessNet-Jahrestagung und 32. DECHEMA-Jahrestagung der Biotechnologen 2016, 12. - 15. September 2016, Eurogress Aachen VL - 88 IS - 9 SP - 1229 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Tippkötter, Nils A1 - Sieker, T. A1 - Wiesen, S. A1 - Duwe, A. A1 - Roth, J. A1 - Ulber, Roland T1 - Simultane Saccharifizierung und Fermentierung (SSF) sowie Produktion von Aceton, Butanol, Ethanol (ABE) und Dicarbonsäuren aus technischer Cellulose T2 - Chemie Ingenieur Technik N2 - Technische Cellulose wurde als möglicher Rohstoff zur fermentativen Produktbildung untersucht. Hierfür wird Cellulose in der Lignocellulose-Bioraffinerie hergestellt und daraus Hydrolysat gewonnen. Die Prüfung der technischen Hydrolysate als Substrate erfolgte anhand eines breiten Spektrums an Bioprodukten, von Kraftstoffen wie Ethanolund Butanol, bis zu den Dicarbonsäuren Itacon- und Bernsteinsäure. Dabei werden Bakterien, Hefen und Pilze als Produktionsorganismen eingesetzt. Die einzelnen Herstellverfahren stellen unterschiedliche Anforderungen an die Substrathandhabung. Im Fall der Ethanol- und Butanol-Gewinnung kann eine simultane Saccharifizierung und Fermentierung (SSF) durchgeführt werden. Aufgrund der Produkttoxizität erfordert die Butanol-Herstellung dabei eine In-situ-Produktabtrennung durch Lösemittelimprägnierte Partikel. Die Herstellung der beiden Dicarbonsäuren unterscheidet sich in der Sensitivität der verwendeten Mikroorganismen gegenüber Inhibitoren, die in Spuren im Hydrolysat enthalten sind. Die Bernteinsäurebildung mit Actinobacillussuccinogenes kann mit unbehandeltem Hydrolysat erfolgen. Dagegen erfordert die Gewinnung von Itaconsäure mit A. terreus eine Detoxifizierung des Hydrolysats. Insgesamt konnte gezeigt werden, dass sämtliche Bioraffinerie-Hydrolysate als Substrate für unterschiedliche Fermentationen geeignet sind. Y1 - 2014 U6 - https://doi.org/10.1002/cite.201450297 SN - 0009-286X SN - 1522-2640 (eISSN) N1 - ProcessNet-Jahrestagung 2014 und 31. DECHEMA-Jahrestagung der Biotechnologen, 30. September - 2. Oktober 2014, Eurogress Aachen VL - 86 IS - 9 SP - 1518 PB - Wiley-VCH CY - Weinheim ER -