TY - JOUR A1 - Staat, Manfred T1 - Local and global collapse pressure of longitudinally flawed pipes and cylindrical vessels N2 - Limit loads can be calculated with the finite element method (FEM) for any component, defect geometry, and loading. FEM suggests that published long crack limit formulae for axial defects under-estimate the burst pressure for internal surface defects in thick pipes while limit loads are not conservative for deep cracks and for pressure loaded crack-faces. Very deep cracks have a residual strength, which is modelled by a global collapse load. These observations are combined to derive new analytical local and global collapse loads. The global collapse loads are close to FEM limit analyses for all crack dimensions. KW - Finite-Elemente-Methode KW - Grenzwertberechnung KW - Axialbelastung KW - FEM KW - Grenzwertberechnung KW - Axialbelastung KW - Traglastanalyse KW - Limit analysis KW - Global and local collapse KW - Axially cracked pipe KW - Pressure loaded crack-face Y1 - 2005 ER - TY - JOUR A1 - Staat, Manfred T1 - Direct finite element route for design-by-analysis of pressure components N2 - In the new European standard for unfired pressure vessels, EN 13445-3, there are two approaches for carrying out a Design-by-Analysis that cover both the stress categorization method (Annex C) and the direct route method (Annex B) for a check against global plastic deformation and against progressive plastic deformation. This paper presents the direct route in the language of limit and shakedown analysis. This approach leads to an optimization problem. Its solution with Finite Element Analysis is demonstrated for mechanical and thermal actions. One observation from the examples is that the so-called 3f (3Sm) criterion fails to be a reliable check against progressive plastic deformation. Precise conditions are given, which greatly restrict the applicability of the 3f criterion. KW - Einspielen KW - Plastizität KW - Deformation KW - Analytischer Zulaessigkeitsnachweis KW - Einspiel-Analyse KW - fortschreitende plastische Deformation KW - alternierend Verformbarkeit KW - Einspiel-Kriterium KW - Design-by-analysis KW - Shakedown analysis KW - Progressive plastic deformation KW - Alternating plasticity KW - Shakedown criterion Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Übungsklausur zum Fach Werkstoffkunde 3 N2 - Übungsklausur KW - Werkstoffkunde KW - Fertigungsverfahren KW - Übungsklausur Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Fertigungsverfahren I : Urformen ; Skript zur Vorlesung N2 - Urformen aus dem flüssigen oder teigigen Zustand Im Mittelpunkt stehen alle Gießverfahren. Großtechnische Bedeutung haben neben den Metallgießverfahren vor allem auch Verfahren zum Urformen von Kunststoffen und in steigendem Maße auch solche zur Herstellung von Keramiken und Kompositwerkstoffen KW - Fertigungsverfahren KW - Urformen KW - Gießen Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Fertigungsverfahren I : Umformen ; Skript zur Vorlesung N2 - Grundlagen, Druck-Umformen (Walzen, Schmieden, Gesenkschmieden), Zugdruckumformen (Durchziehen, Tiefziehen), Zugumformen, Biegeumformen KW - Umformverfahren KW - Druck-Umformen KW - Zugdruckumformen KW - Zugumformen KW - Biegeumformen Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Übungsklausur zum Fach Fertigungsverfahren 1 N2 - Übungsklausur KW - Fertigungsverfahren KW - Übungsklausur Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Regelungstechnik : Skript zur Vorlesung N2 - Prinzip und Geschichte der Regelungstechnik; technische Steuerungen und Regelungen; Definition und Stellung innerhalb der Automatisierungstechnik. Elementare Übertragungsglieder, Streckentypen, typische Regler (unstetige Regler, stetige Regler), Reglerentwurf (einfache Verfahren, einschließlich Faustformelverfahren). Stabilitätsanalyse von Regelkreisen (einfache Verfahren, ohne Herleitung der Beweise) KW - Regelungstechnik Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Digitale Regelungstechnik N2 - Grundlagen (Prinzip, Komponenten, Abtastung, Aliasing) Algorithmus (Implementierung, Pseudo Code, Ermittlung der Faktoren) Beispiel KW - Digitale Regelungstechnik Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Fuzzy Regelung N2 - Überblick Fuzzy-Regler, Fuzzy Sets (Scharfe Mengen, Fuzzy Sets, Formen (stückweise linear, gaußförmig, glockenförmig), Eigenschaften (Gleichheit, Teilmenge)), Fuzzy Operatoren (NICHT, UND, ODER) Fuzzyfizierung Inferenzen (Verarbeitungsvorschrift, Ermittlung der aktiven Regeln, Ermittlung der Fuzzy Mengen, Überlagerung) Defuzzyfizierung (Mean-of-Maximum, Center-of-Gravity, Largest-of-Maximum, Smallest-of-Maximum, Center-of-Singletons) Entwurf, Beispiel, Fuzzy Tools, Internet, Literatur KW - Regelungstechnik KW - Fuzzy Regelung Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Übungsklausur zum Fach Regelungstechnik N2 - Übungsklausur KW - Regelungstechnik KW - Übungsklausur Y1 - 2005 ER - TY - GEN A1 - Balzar, Christoph Rupert T1 - Land in land N2 - [...] Darin suche ich „Zwischenräume“ in der digitalen Verschmelzung von Fotos unterschiedlicher Orte und durchleuchte diese neu geschaffenen Landschaften auf ihren Sinn für mich. Anhand der so ge-wonnenen Erkenntnisse belebe ich diese Plätze später mit Menschen, Tieren und Fundstücken, die mir das Schicksal auf meinen „Walkabouts“ durch den australischen Kontinent zugespielt hat und denen ich zu den neu entstandenen Orten passende Bedeutungen beimesse. [...] Neben meinen flächigen, fotografischen und installativen Werken stelle ich auch ein umfassendes Rahmen- und Begleitprogramm zur Ausstellung her, beispielsweise eine CI und eine Homepage. KW - Digitale Photographie KW - Photomontage KW - Naturphotographie KW - Aborigines KW - Fotografie KW - Digitale Montage KW - Bilderserie KW - Ureinwohner KW - Australien KW - Inszenierte Photographie KW - Photography KW - Digital montage KW - Series KW - Aboriginal people KW - Australia KW - Set-up photography Y1 - 2005 ER - TY - JOUR T1 - 100 Jahre AachenDesign : Beilage des Fachblattes 1-2005 der Fachhochschule Aachen N2 - 100 Jahre Design Feier(n) - zwischen Gestern und Morgen; In Gedanken lebt sie weiter - Abriss der ehemaligen Werkkunstschule an der Südstraße; Die Kampfzeit hautnah miterlebt: Rückblick der ehemaligen Dekanin und Rektorin Prof. Dr. Hildegard Reitz; EuRegio-Design-Preis; AachenDesign: ein starker Partner und eine Visitenkarte der Region; "Kegeln": auf der EuroShop 2005; sub-art: gestalterische Faszination einer Naturgewalt; It's Showtime:"Vorhang auf und Filme ab"; "visperanto": Entwicklung einer visuellen Zeichensprache; Harmonie im Zusammenspiel von Kunst und Ausstellungsarchitektur: Ausstellung "Albrecht Dürer - Apelles des Schwarz-Weiß" im Suermondt-Ludwig-Museum; Mamba am Aachener Klinikum; "Gestaltungsoffensive": Designstudierende entwerfen Werbekonzepte für Aachener Online-Tageszeitungen; Ein "Boxhorn" gibt's nicht zweimal; Ziele und Zukunft: "Gestaltung: Kommunikation, Produkt und Medien"; KW - Fachhochschule Aachen KW - Design KW - Aachen University of Applied Sciences KW - Design Y1 - 2005 ER - TY - GEN A1 - Casse-Schlüter, Doris T1 - LOS! Zündstoff: Hochschulreform 2005 N2 - Ein hundert Seiten starkes Protestdokument, mit humorvollen, kritischen und zornigen gestalterischen Beiträgen Studierender des SS 05 (Julia Balkwitz, Kathrin Hartmann, Sandra Janiec, Thilo Klüppel, Judith Koch, Julia Kuhrmeyer, Kristina Mickartz, Anna Neumann, Melanie Neumann, Melina Oberscheven, Veronika Ripplinger, Silke Stendenbach und Marcus Wacker) / Seminar Prof. Casse-Schlüter zum Thema Studienreform – Bachelor / Master – und zur momentanen Besetzungssperre von Professorenstellen im FB Design. KW - Hochschulpolitik KW - Gebrauchsgraphik KW - Broschüre KW - Plakat KW - Plakatwerbung KW - Grafikdesign KW - Graphikdesign KW - Hochschulpolitik KW - Brochure-Design KW - Graphic Design KW - University Policy KW - Brochure Design KW - Poster Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Lasertechnologie : Laser - Materialbearbeitung ; Grundlagen - Verfahren - Anwendungen N2 - Theoretische Grundlagen, Grundlagen der Materialbearbeitung mit Laserstrahlung, Aufbau und Funktion von Laser-Bearbeitungsanlagen, Laserstrahl-Schneiden, Laserstrahl-Schweißen, Laserstrahl-Bohren, Beschriften und Markieren mit dem Laser, Oberflächenveredeln mit dem Laser, Lasersicherheit, Umweltschutz KW - Laser KW - Materialbearbeitung Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Übungsklausur zum Fach Lasertechnologie N2 - Übungsklausur KW - Lasertechnologie KW - Übungsklausur Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Lasermesstechnik 1 N2 - Strahlquelle, Verfahren, Triangulation, Interferometrie, Laufzeit, Lidar, Holographie, Speckle, Applikationen, Laseroptische Strömungsmessung, Laser Doppler Velocimetry, Particle Image Velocimetry KW - Lasermesstechnik Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Lasermesstechnik 2 N2 - Laser-Doppler-Velozimetrie: Grundlagen, Referenzstrahlverfahren, Kreuzstrahlverfahren, Signalauswertung, Richtungserkennung, Mehrkomponentensysteme, Anwendungen KW - Lasermesstechnik KW - Laseroptische Strömungsmessung KW - Laser-Doppler-Velozimetrie Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Zusammenfassung der Inhalte der Veranstaltung Lasertechnologie zur Vorbereitung auf die schriftliche Klausur N2 - Grundlagen und Anwendungen KW - Lasertechnologie Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Rapid Prototyping : Werkzeuge für die schnelle Produktentwicklung N2 - Grundlagen der Rapid Prototyping-Verfahren Industrielle Rapid Prototyping Verfahren: Stereolithographie (SL), Lasersintern (SLS), Schicht- (Laminat) Verfahren (LLM), Extrusions-Verfahren (FLM), 3D-Printing (3DP) Abformverfahren und Folgeprozesse: Vakuumgießen, Gießharz-Werkzeuge, Vorserienwerkzeuge aus Aluminium KW - Rapid Prototyping Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Short course on rapid prototyping N2 - Rapid Prototyping Technology: Types of models, rapid prototyping processes, prototyper Fundamentals of rapid prototyping Industrial rapid prototyping technology: Stereolithography, (Selective) laser sintering ((S)LS), Layer laminate manufacturing (LLM), Fused layer modeling (FLM), Three dimensional printing (3DP) KW - Rapid Prototyping KW - Rapid Prototyping Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Zusammenfassung der Inhalte der Veranstaltung Rapid Prototyping zur Vorbereitung auf die schriftliche Klausur N2 - Definition, Beschreibung der verschiedenen Verfahren, Anwendungsbeispiele KW - Rapid Prototyping KW - Rapid Prototyping Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Übungsklausur zum Fach Rapid Prototyping N2 - Übungsklausur KW - Rapid Prototyping KW - Übungsklausur KW - Rapid Prototyping Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Werkstoffkunde III : Werkstoff- und Verfahrenskunde für die spanlosen Fertigungsverfahren, Pulvermetallurgie, Oberflächentechnik, Abtragen ; Skript zur Vorlesung N2 - Werkstoff- und Verfahrenskunde für die spanlosen Fertigungsverfahren, Pulvermetallurgie, Oberflächentechnik, Abtragen Diffusionsvorgänge, Änderung der Stoffeigenschaften, Schutzschichtenbildung, Oberflächenhärten, Pulver-basierende Fertigungsverfahren (Pulvermetallurgie), Abtragende Verfahren KW - Werkstoffkunde KW - Spanlose Fertigungsverfahren KW - Pulvermetallurgie KW - Oberflächentechnik KW - Abtragen Y1 - 2005 ER - TY - JOUR A1 - Gebhardt, Andreas T1 - Rapid Prototyping für metallische Werkstücke: Direkte und indirekte Verfahren N2 - Die generative Herstellung von Kunststoffbauteilen hat im Gewand des Rapid Prototyping die Produktentwicklung nachhaltig positiv beeinflusst und ist im Begriff als Rapid Manufacturing die Fertigung zu revolutionieren. Je mehr sich die besonderen Eigenschaften generativ gefertigter Kunststoffbauteile herumsprechen, desto lauter wird der Ruf nach Metallbauteilen. Die Entwicklung entsprechender Prozesse läuft auf Hochtouren, kann aber bisher aber erst vereinzelt Erfolge vorweisen. Dabei wären es gerade die Metallbauteile, die ausgestattet mit den besonderen Merkmalen generativ gefertigter Werkstücke, in vielen Branchen einen deutlichen Entwicklungsschub auslösen könnten. Für den potenziellen Anwender ist dabei besonders verwirrend, dass die unterschiedlichsten Ansätze nebeneinander verfolgt werden. Im Folgenden soll daher der Versuche unternommen werden, dieses weite Feld systematisiert darzustellen und Möglichkeiten und Trends zu erläutern. N2 - The generative manufacturing of plastic components via rapid prototyping has positively affected the product development. As 'rapid manufacturing' the method is about to revolutionize the manufacturing in general. The more the special characteristics of generative manufactured plastic components are getting about, the louder becomes the call for generative manufactured metal components. The development of analogical processes runs on full speed. So far however, only sporadic successes can be registered. Though there are in particular the metal components which could, equipped with the special characteristics of generative manufactured components, initiate a developmental boost in many industries. For the potential operator it is particularly confusing that the different approaches are traced parallel. Therefore in the following contribution the attempt is undertaken not only to represent this wide field in a systematic way but to describe possibilities and trends as well. KW - Rapid prototyping KW - Rapid Prototyping KW - Rapid Manufacturing KW - generative Fertigungsverfahren KW - Werkzeugeinsätze KW - Werkzeuge KW - Rapid prototyping KW - rapid manufacturing Y1 - 2005 ER - TY - JOUR A1 - Gebhardt, Andreas A1 - Brücker, Christoph A1 - Schmidt, Frank-Michael T1 - RP gestützte Herstellung komplexer transparenter Hohlräume für die Strömungsanalyse N2 - Die Berechnung der Durchströmung von Bauteilen ist gegenüber derjenigen von umströmten Bauteilen deutlich im Hintertreffen. Das liegt vor allem an der fehlenden Verfügbarkeit geeigneter optisch transparenter Modellkanäle für die experimentelle Analyse. Der Beitrag stellt ein Verfahren zur Herstellung transparenter durchströmter Geometrien auf der Basis generativ gefertigter Urmodelle vor. Damit können beliebig komplexe Innenströmungen optisch analysiert werden. Anhand von zwei Beispielen aus der Medizin, der Modellierung der oberen Atemwege und des Bronchialbaums, wird das Verfahren vorgeführt. Der generative Bauprozess mittels 3D-Printing wird beschrieben und die Abformung in transparentem Silikon gezeigt. Schließlich werden beispielhaft der Messaufbau und Ergebnisse der Anwendung vorgestellt. Das Verfahren bildet die Grundlage für die Analyse und Berechnung komplexer Innenströmungen und trägt somit zur Verbesserung zahlreicher technischer Anwendungen bei. N2 - Unlike the flow around technical products the interior flow is not understood very well. That’s mainly because of a lack of suitable transparent investigation tunnels that are needed to apply optical methods. The paper proposes a procedure to make precise complex hollow structures from a highly transparent material using masters from generative or Rapid Prototyping processes. Taking two examples from the medical field, the upper human airways and the bronchial tree, the entire process is shown. The 3D Printing build process is illustrated as well as the silicon casting process. Finally the measuring equipment is demonstrated and sample results are given. The process establishes the basis for the investigation and calculation of complex interior flow pattern and therefore contributes to a better understanding and consequently improvement of appropriate technical products. KW - Rapid prototyping KW - Rapid Prototyping KW - Strömungsanalyse KW - Innenströmung KW - Modellkanäle KW - 3D-Printing Y1 - 2005 ER - TY - CHAP A1 - Brüssermann, Klaus T1 - Platform of Excellence in "Energy and Environment" N2 - The Ministry of Science and Research in North Rhine-Westphalia created eight platforms of excellence, one in the research area „Energy and Environment“ in 2002 at ACUAS. This platform concentrates the research and development of 13 professors in Jülich and Aachen and of two scientific institutes with different topics: – NOWUM-Energy with emphasis on efficient and economic energy conversion – The Solar Institute Jülich – SIJ – being the largest research institute in the field of renewables at a University of Applied Sciences in Germany With this platform each possible energy conversion – nuclear, fossil, renewable- can be dealt with to help solving the two most important problems of mankind, energy and potable water. At the CSE are presented the historical development, some research results and the combined master studies in „Energy Systems“ and „Nuclear Applications“ KW - Energietechnik KW - Kernenergie KW - Umwelt KW - Energy KW - environment KW - Energy Systems KW - Nuclear Applications Y1 - 2005 ER - TY - CHAP A1 - Brüssermann, Klaus A1 - Deuster, M. T1 - Temperature measurement to optimise the burning process N2 - One of the most important parameters in a burning chamber - in power stations, in waste to energy plants - is the temperature. This temperature is in the range of 700-1500 °C - one of the most advanced measuring methods being the acoustic pyrometry with the possibility of producing temperature mapping in one level of the burning chamber - comparable to computer tomography. The results of these measurements discussed in the presentation can be used - to fulfil the legal requirements in the FRG or in the EU - to equalise the temperature in one level of the burning chamber to optimise the steam production (better efficiency of the plant) and to minimise the production of temperature controlled flue gas components (NO, CO a. o.) - to control the SNCR-process if used. KW - Pyrometrie KW - Temperaturmessung KW - temperature measurement KW - acoustic pyrometry KW - steam production KW - flue gas components Y1 - 2005 ER - TY - GEN A1 - Weßling, Matthias T1 - Liderança e Motivação Organizacional: Conceitos, Auto-Avaliações, Experiências Européias T1 - Leadership and organizational motivation: concepts, self-assessment, european experiences N2 - Os 3 items majores: a explicação do conceito científico, depois praticar o conceito através de uma auto-avaliação, e no final algumas experiências de empresários européias. Um Líder de Sucesso deve ser - como diz o ditado - "um Pau para toda Obra", uma pessoa de múltiplas Funções e Competências. Em geral são as competências requeridas de um Líder de Sucesso as 4 seguintes: 1. Competência especializada 2. Competência Metódica 3. Competência social 4. Competência individual. N2 - Neben dem wissenschaftlichen Konzept wird eine Anleitung zur Selbsteinschätzung gegeben und es werden praktische Erfahrungen mit Führungskräften aus europäischen Unternehmen gegeben. Ergänzt wird die theoretische Struktur durch das viergliedrige System der grundlegenden Kompetenzen einer jeden erfolgreichen Führungskraft: 1. Fachkompetenz 2. Methodenkompetenz 3. Sozialkompetenz 4. Individualkompetenz (oder Selbstkompetenz). KW - Führung KW - Motivation KW - Führung KW - Motivation KW - Leadership KW - Motivation Y1 - 2005 ER - TY - GEN A1 - Weßling, Matthias T1 - Desenvolvimento de grupo - Características de Teams de alto desempenho T1 - Team-Development - characteristics of high performance teams N2 - Um líder excelente está disposto a partilhar a liderança do grupo, a fim de iniciar o desenvolvimento de nosso Team. Pois: Um grupo somente alcançará sua plenipotência, se o seu líder estiver disposto a partilhar a liderança. Em princípio, múltiplos conteúdos podem – em diferentes seqüências – ser tema de um desenvolvimento de Team. Pela experiência, os seguintes temas são os que apresentam os temas difíceis para a eficácia do Team, que necessitam ser tratados. Para cada tema de desenvolvimento é importante tratar de cada um dos passos seguintes no grupo como um todo, para se assegurar uma realização duradoura na prática do grupo. N2 - Exzellente Führungskräfte bringen keine unkritischen Nachfolger hervor, sondern exzellente Führungskräfte. Die Führungskraft eines Hochleistungsteams ist in der Lage, die Führung mit den Teammitgliedern zu teilen. In verschiedenen Stadien der Teamentwicklung ist sie in der Lage, den Entwicklungsstand zu diagnostizieren und entsprechend die virulenten Entwicklungsthemen im Team anzugehen. Dabei berücksichtigt sie die unterschiedlichen Persönlichkeiten der Teammitglieder, hier untergliedert anhand der Persönlichkeitstypologie von Fritz Riemann. KW - Teamentwicklung KW - Teamentwicklung KW - Hochleistungsteams KW - High-performance-teams KW - Teambuilding KW - Team-development Y1 - 2005 ER - TY - JOUR A1 - Matheis, Anton A1 - Röth, Thilo A1 - Wagner, Manfred T1 - Studentenprojekt "Capro" – eine virtuelle Sportwagenstudie "Vision 2015" N2 - Design- und Karosseriebaustudenten der FH Aachen entwickeln gemeinsam mit externen Fachleuten unter Einsatz virtueller Entwicklungswerkzeuge ein Konzept für einen Sportwagen KW - Karosseriebau KW - Sportwagen KW - Kraftfahrzeugbau KW - Studentenprojekt KW - Virtuelle Fahrzeugentwicklung KW - car body construction Y1 - 2005 ER - TY - JOUR A1 - Dick, Angela A1 - Wagner, Manfred A1 - Röth, Thilo T1 - Capro Automotive Group FH Aachen N2 - Design- und Karosseriebaustudenten der FH Aachen entwickeln gemeinsam mit externen Fachleuten unter Einsatz virtueller Entwicklungswerkzeuge ein Konzept für einen Sportwagen KW - Karosseriebau KW - Sportwagen KW - Kraftfahrzeugbau KW - Studentenprojekt KW - Virtuelle Fahrzeugentwicklung KW - car body construction Y1 - 2005 ER - TY - JOUR A1 - Heptner, K. A1 - Wollert, Jörg T1 - FML-Report - VDI-Richtlinie 4485 'E-Commerce und Logistik' JF - Logistik für Unternehmen : das Fachmagazin der internen und externen Logistik Y1 - 2005 SN - 0930-7834 N1 - Printausg. in der Bibliothek vorhanden: 43 Z 513 VL - 19 SP - 58 EP - 59 ER - TY - JOUR A1 - Wollert, Jörg T1 - Softwaretrends in der Automatisierungstechnik JF - Etz : Elektrotechnik & Automation ; Organ des VDE Verband der Elektrotechnik Elektronik Informationstechnik e.V. und der Energietechnischen Gesellschaft im VDE (ETG) und der VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA) Y1 - 2005 SN - 0948-7387 N1 - Printausgabe in der Bibliothek vorhanden: 63 ZS 035; 23 Z 133 VL - 126 IS - S2 SP - 74 EP - 79 ER - TY - JOUR A1 - Wollert, Jörg T1 - Die nächste "Generation Wireless" : Kommunikation mit hoher Bandbreite wird mobil JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium für Entwicklungen funkbasierter Systeme Y1 - 2005 SN - 0013-5658 ; 1611-5120 N1 - Printausgabe in der Bibliothek vorhanden: 23 Z 263; 63 ZS 030 IS - H. 2 SP - 40 EP - 44 ER - TY - CHAP A1 - Vedral, Andreas A1 - Wollert, Jörg T1 - Service based Bluetooth dual-hop networks using CORBA T2 - Proceedings of the IASTED International Conference on Artificial Intelligence and Applications : as part of the 23rd IASTED International Multi-Conference on Applied Informatics ; February 14 - 16, 2005, Innsbruck, Austria Y1 - 2005 SN - 0-88986-457-8 SP - 724 EP - 728 PB - Acta Pr. CY - Anaheim, Calif. ER - TY - JOUR A1 - Herrmann, Ulf A1 - Nava, P. T1 - Die Strahlung der Sonne einfangen JF - DLR-Nachrichten / Deutsches Zentrum für Luft- und Raumfahrt Y1 - 2005 SN - 0937-0420 VL - 109 IS - Sonderheft Solarforschung SP - 34 EP - 37 ER - TY - CHAP A1 - Wollert, Jörg T1 - Was der Einsatz von Funktechnik bringt : Wireless-Technologie in der Automation will besonnen geplant werden T2 - Visions of automation - Blick in die Zukunft der Automatisierung ; Vol. deutsch/englisch Y1 - 2005 SN - 978-3-8259-1934-4 SP - 18 EP - 23 PB - Heinrich Vogel Verlag CY - München ER - TY - CHAP A1 - Wollert, Jörg A1 - Vedral, Andreas T1 - Bluetooth - Integrationstechnologie für automotive Anwendungen T2 - Begleittexte zum Entwicklerforum ZigBee & Co. - Drahtlose Nahbereichsnetzwerke : 20. April 2005, München-Dornach Y1 - 2005 ER - TY - CHAP A1 - Wollert, Jörg T1 - Bluetooth, WLAN und ZigBee für die Automatisierungstechnik T2 - Jahrbuch Elektrotechnik 2006 Y1 - 2005 SN - 978-3-8007-2895-4 SP - 27 EP - 41 PB - VDE Verl. CY - Berlin [u.a.] ER - TY - CHAP A1 - Feiser, Johannes T1 - Geotechnik T2 - Wendehorst Beispiele aus der Baupraxis. - 1. Aufl. Y1 - 2005 SN - 3-519-00489-5 ; 978-3-519-00489-9 SP - 195 EP - 220 PB - Teubner CY - Stuttgart ER - TY - CHAP A1 - Strohmeier, Andreas T1 - Wasserwirtschaft T2 - Wendehorst Beispiele aus der Baupraxis. - 1. Aufl. Y1 - 2005 SN - 3-519-00489-5 ; 978-3-519-00489-9 SP - 221 EP - 254 PB - Teubner CY - Stuttgart ER - TY - CHAP A1 - Lohse, Wolfram T1 - Stahlbau T2 - Wendehorst Beispiele aus der Baupraxis. - 1. Aufl. Y1 - 2005 SN - 3-519-00489-5 ; 978-3-519-00489-9 SP - 99 EP - 136 PB - Teubner CY - Stuttgart ER - TY - JOUR A1 - Fissabre, Anke T1 - Das Fach Baugeschichte : Eine Umfrage an 18 deutschsprachigen Architekturfakultäten JF - Bauwelt Y1 - 2005 SN - 0005-6855 VL - 96 IS - 40-41 SP - 48 EP - 57 ER - TY - CHAP A1 - Schemm, R. A1 - Lintzel, P. A1 - Borchert, Jörg ED - Zenke, Ines T1 - Typische Elemente des Handelsmarktes T2 - Energiehandel in Europa Y1 - 2015 SN - 3-406-52443-5 SP - 195 EP - 216 PB - Beck CY - München ER - TY - CHAP A1 - Borchert, Jörg A1 - Schemm, R. A1 - Lintzel, P. ED - Zenke, Ines T1 - Risiken des Handelsgeschäftes T2 - Energiehandel in Europa Y1 - 2005 SN - 3-406-52443-5 SP - 218 EP - 235 PB - Beck CY - München ER - TY - JOUR A1 - Seibler, Jost A1 - Küter-Luks, Birgit A1 - Kern, Heidrun A1 - Streu, Sandra A1 - Plum, Leona A1 - Maurer, Jan A1 - Kühn, Ralf A1 - Brüning, Jens C. A1 - Schwenk, Frieder T1 - Single copy shRNA configuration for ubiquitous gene knockdown in mice JF - Nucleic Acids Research Y1 - 2005 U6 - http://dx.doi.org/10.1093/nar/gni065 SN - 1362-4962 VL - 33 IS - 7 SP - e67 ER - TY - JOUR A1 - Goetze, Sandra A1 - Baer, Alexandra A1 - Winkelmann, Silke A1 - Nehlsen, Kristina A1 - Seibler, Jost A1 - Maass, Karin A1 - Bode, Jürgen T1 - Performance of genomic bordering elements at predefined genomic loci JF - Molecular and Cellular Biology Y1 - 2005 U6 - http://dx.doi.org/10.1128/MCB.25.6.2260-2272.2005 SN - 1098-5549 VL - 25 IS - 6 SP - 2260 EP - 2272 ER - TY - JOUR A1 - Mottaghy, Darius A1 - Schellschmidt, R. A1 - Popov, Y. A. A1 - Clauser, C. A1 - Kukkonen, I. T. A1 - Nover, G. A1 - Milanovsky, S. A1 - Romushkevich, R. A. T1 - New heat flow data from the immediate vicinity of the Kola super-deep borehole: Vertical variation in heat flow density confirmed and attributed to advection JF - Tectonophysics Y1 - 2005 U6 - http://dx.doi.org/10.1016/j.tecto.2005.03.005 SN - 1879-3266 VL - 401 IS - 1-2 SP - 119 EP - 142 ER - TY - JOUR A1 - Kirsch, Ansgar A1 - Kolymbas, Dimitrios T1 - Theoretische Untersuchung zur Ortsbruststabilität JF - Bautechnik : Zeitschrift für den gesamten Ingenieurbau Y1 - 2005 U6 - http://dx.doi.org/10.1002/bate.200590151 SN - 1437-0999 (E-Journal); 0005-6820 (Print); 0932-8351 (Print) N1 - Gedruckt in der Bibliothek Bayernallee vorhanden: 13 Z 177-2005 VL - Bd. 82 IS - H. 7 SP - 449 EP - 456 ER - TY - CHAP A1 - Rochefort, E. de A1 - Verver, M. A1 - Grunendahl, A. A1 - Mooi, H. A1 - Butenweg, Christoph T1 - Detailed modelling of the lumbar spine for investigation of low back pain T2 - Digital Human Modeling for Design and Engineering Symposium : Iowa City, Iowa June 14-16, 2005. (SAE technical papers series ; 2005-1-2716) Y1 - 2005 U6 - http://dx.doi.org/10.4271/2005-01-2716 SN - 0096-736X SP - 1 EP - 11 PB - SAE International CY - Warrendale, Pa. ER - TY - JOUR A1 - Rochefort, E. de A1 - Verver, M. A1 - Grunendahl, A. A1 - Mooi, H. A1 - Butenweg, Christoph T1 - Detailed modelling of the lumbar spine for investigations of low back pain JF - SAE transactions : papers presented at Society and Section meetings / Society of Automotive Engineers Y1 - 2005 SN - 0096-736X VL - Volume 114 IS - Part 7 SP - 788 EP - 796 ER - TY - JOUR A1 - Mistler, Michael A1 - Butenweg, Christoph T1 - Verformungsbasierter seismischer Nachweis von Mauerwerksbauten mit der Kapazitätsspektrum-Methode JF - Mauerwerk : European journal of masonry Y1 - 2005 U6 - http://dx.doi.org/10.1002/dama.200590098 SN - 1437-1022 (E-Journal); 1432-3427 (Print) VL - Volume 9 IS - Issue 6 SP - 255 EP - 261 ER - TY - JOUR A1 - Renault, Philippe A1 - Butenweg, Christoph A1 - Meskouris, Konstantin T1 - Beurteilung der Erdbebensicherheit von bestehenden Brückenbauwerken am Beispiel der Rheinbrücke Emmerich JF - Beton- und Stahlbetonbau Y1 - 2005 U6 - http://dx.doi.org/10.1002/best.200590145 SN - 1437-1006 (E-Journal); 0005-9900 (Print) N1 - Printausg. in der Bibliothek Bayernallee vorhanden: 13 Z 061-2005 VL - Volume 100 IS - Issue 7 SP - 574 EP - 581 ER - TY - JOUR A1 - Butenweg, Christoph A1 - Kuhlmann, Wolfram A1 - Bettzieche, V. T1 - Baudynamische Untersuchung von Talsperren JF - Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt Y1 - 2005 SN - 0005-6650 (Print) ; 1436-4867 (E-Journal) ; 1434-6591 (Beilage) VL - Band 80 IS - Nr. 3 SP - S2 EP - S6 ER - TY - BOOK A1 - Meskouris, Konstantin A1 - Butenweg, Christoph A1 - Hake, Erwin A1 - Holler, Stefan T1 - Baustatik in Beispielen : mit Rechenprogrammen auf CD-ROM Y1 - 2005 SN - 3-540-21427-5 ; 978-3-540-21427-4 (print) ; 978-3-540-28443-7 (E-Book) PB - Springer-Verlag CY - Berlin, Heidelberg ER - TY - BOOK A1 - Meskouris, Konstantin A1 - Butenweg, Christoph T1 - Neubewertung der Erdbebensicherheit von Talsperren in Deutschland : DGEB-Workshop, 28. November 2003 in Potsdam / K. Meskouris, Chr. Butenweg (Hrsg.). (DGEB-Publikation ; Nr. 12) Y1 - 2005 SN - 3-930108-08-9 PB - DGEB CY - Aachen ER - TY - CHAP A1 - Meskouris, Konstantin A1 - Butenweg, Christoph T1 - Aktuelle Themen des Erdbebeningenieurwesens und der Baudynamik : D-A-CH-Tagung 2005 in Köln / K. Meskouris, Chr. Butenweg (Hrsg.). Organisiert von der Deutschen Gesellschaft für Erdbebeningenieurwesen und Baudynamik. T2 - DGEB-Publikation ; 13 Y1 - 2005 SN - 3-930108-09-7 PB - DGEB CY - Aachen ER - TY - CHAP A1 - Kuhlmann, W. A1 - Bettzieche, V. A1 - Roesler, F. A1 - Butenweg, Christoph A1 - Könke, C. A1 - Meskouris, Konstantin T1 - Baudynamische Untersuchung von Talsperren des Ruhrverbandes T2 - Neubewertung der Erdbebensicherheit von Talsperren in Deutschland : DGEB-Workshop, 28. November 2003 in Potsdam = Assessment of the seismic safety of dams in Germany / organisiert von der Deutschen Gesellschaft für Erdbebeningenieurwesen und Baudynamik. K. Meskouris ... (Hrsg.) (DGEB-Publikation ; Nr. 12) Y1 - 2005 SN - 3-930108-08-9 SP - 37 EP - 48 PB - DGEB CY - Aachen ER - TY - CHAP A1 - Gömmel, Andreas A1 - Butenweg, Christoph A1 - Kob, Malte T1 - Towards a complete finite-element model of human phonation: modeling phonatory maneuvers T2 - 12th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields : Ulm, Germany, 20 - 21 July 2005 / University of Ulm, Department of Orthodontics ... Y1 - 2005 SN - 978-3-9806183-8-0 PB - Univ., Dep. of Orthodontics CY - Ulm ER - TY - CHAP A1 - Butenweg, Christoph A1 - Bettzieche, Volker A1 - Kuhlmann, Wolfram A1 - Meskouris, Konstantin T1 - Die baudynamische Beurteilung von Talsperren am Beispiel der Fürwiggetalsperre T2 - Berichte der Fachtagung Baustatik - Baupraxis 9 am 14. und 15. März 2005 in Dresden / Institut für Statik und Dynamik der Tragwerke, TU Dresden, Deutschland Y1 - 2005 SN - 3-00-015456-6 SP - 73 EP - 84 PB - Inst. für Statik und Dynamik der Tragwerke CY - Dresden ER - TY - CHAP A1 - Karimi, Iman A1 - Butenweg, Christoph A1 - Toll, Britta T1 - Vulnerability assessment of industrial facilities T2 - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping Y1 - 2005 SN - 1-905088-00-0 U6 - http://dx.doi.org/10.4203/ccp.81.34 SP - 34, 73 EP - 75 PB - Civil-Comp Press CY - Stirling ER - TY - CHAP A1 - Mistler, Michael A1 - Butenweg, Christoph T1 - A seismic design procedure for masonry buildings T2 - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping Y1 - 2005 SN - 1-905088-00-0 U6 - http://dx.doi.org/10.4203/ccp.81.193 SP - 465 EP - 467 PB - Civil-Comp Press CY - Stirling ER - TY - CHAP A1 - Renault, Philippe A1 - Butenweg, Christoph A1 - Mistler, Michael T1 - Seismic vulnerability assessment system for bridges T2 - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping Y1 - 2005 SN - 1-905088-00-0 SP - 1 EP - 14 PB - Civil-Comp Press CY - Stirling ER - TY - CHAP A1 - Grunendahl, A. A1 - de Rochefort, E. A1 - Butenweg, Christoph T1 - Numerical models for investigating the causes of low back pain due to whole-body vibrations T2 - 2nd International Conference on Computational Bioengineering : Lisbon, September 14-16 2005. Volume 2. Y1 - 2005 SN - 978-972-8469-37-3 SP - 905 EP - 914 PB - IST Press CY - Lisbon ER - TY - CHAP A1 - Kalker, Ines A1 - Neumann, M. A1 - Butenweg, Christoph A1 - Holler, Stefan T1 - Modelling of textile strengthened masonry T2 - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping Y1 - 2005 SN - 1-905088-00-0 U6 - http://dx.doi.org/10.4203/ccp.81.184 SP - 447 EP - 448 PB - Civil-Comp Press CY - Stirling ER - TY - CHAP A1 - Gömmel, Andreas A1 - Krämer, Sebastian A1 - Butenweg, Christoph A1 - Kob, Malte T1 - A combined FE and multiple-mass model for numerical simulation of phonatory maneuvers T2 - Proceedings / Forum Acusticum, Budapest, 29 Aug - 2 Sep, 2005 : [Acoustics: science and technology for knowledge based society and healthy environment] / ed. by: Fülöp Augusztinovicz ... Y1 - 2005 SN - 978-963-8241-68-9 SP - 2759 EP - 2764 PB - OPAKFI Tud. Egyesület CY - Budapest ER - TY - CHAP A1 - Renault, Philippe A1 - Butenweg, Christoph T1 - Seismic vulnerability assessment of bridges T2 - First Munich Bridge Assessment Conference, MBAC 2005 : Munich, 20.-25. June 2005 Y1 - 2005 SP - 1 EP - 16 ER - TY - CHAP A1 - Bitz, Andreas A1 - El Ouardi, A. A1 - Streckert, J. A1 - Hansen, V. T1 - Efficient calculation of human exposure in front of base station antennas by a combination of the FDTD and Hybrid(2)-method T2 - Proceedings of the 16th International Zurich Symposium on Electromagnetic Compatibility, Topical Meeting on Biomedical EMC, Zurich, Switzerland, February 2005 Y1 - 2005 SN - 3-9521199-9-7 SP - 115 EP - 118 PB - ETH Zentrum CY - Zürich ER - TY - JOUR A1 - Franke, Helmut A1 - Streckert, Joachim A1 - Bitz, Andreas A1 - Goeke, Johannes A1 - Hansen, Volkert A1 - Ringelstein, E. Bernd A1 - Nattkämper, Heiner A1 - Galle, Hans-Joachim A1 - Stögbauer, Florian T1 - Effects of Universal Mobile Telecommunications System (UMTS) electromagnetic fields on the blood-brain barrier in vitro JF - Radiation Research Y1 - 2005 U6 - http://dx.doi.org/10.1667/RR3424.1 SN - 1938-5404 VL - 164 IS - 3 SP - 258 EP - 269 ER - TY - JOUR A1 - Wissen, M. A1 - Bogdanski, N. A1 - Scheer, H.-C. A1 - Bitz, Andreas A1 - Ahrens, G. A1 - Gruetzner, G. T1 - Implication of the light polarisation for UV curing of pre-patterned resists JF - Microelectronic Engineering Y1 - 2005 U6 - http://dx.doi.org/10.1016/j.mee.2004.12.099 SN - 0167-9317 VL - 78-79 SP - 659 EP - 664 ER - TY - JOUR A1 - Braband, Henrik A1 - Yegen, Eda A1 - Paulßen, Elisabeth A1 - Abram, Ulrich T1 - [{ReN(PMe2Ph)3}{ReO3N}]2 – Structural Evidence for the Nitridotrioxorhenate(VII) Anion, [ReO3N]2− JF - Zeitschrift für anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry Y1 - 2005 U6 - http://dx.doi.org/10.1002/zaac.200500240 SN - 1521-3749 VL - 631 IS - 12 SP - 2408 EP - 2410 ER - TY - JOUR A1 - Schuh, G. A1 - Höhne, Tim A1 - Kampker, A. T1 - Auftragsmanagement in der Supply Chain wird "lean" JF - wt Werkstattstechnik online Y1 - 2005 SN - 1436-4980 VL - 95 IS - 4 SP - 282 EP - 285 ER - TY - BOOK A1 - Barnat, Miriam T1 - Lernen und Macht in einer Non-Profit-Organisation. Discussion Paper SPIII 2005-103 Y1 - 2005 PB - Wissenschaftszentrum Berlin für Sozialforschung CY - Berlin ER - TY - CHAP A1 - Hammer, Andreas A1 - Vieth, Matthias A1 - Maier, Frank T1 - Co-Plot as a new multivariate analysis method for operations management research? T2 - Papers of the 12th International EurOMA Conference on Operational and Global Competitiveness, Budapest, Hungary, June 19-22, 2005 / Editor: Krisztina Demeter Y1 - 2005 SN - 963-218-455-6 SP - 1007 EP - 1016 ER - TY - RPRT A1 - Vieth, Matthias A1 - Hammer, A. A1 - Maier, F. T1 - A critical analysis of the co-plot method T2 - International University in Germany, School of Business Administration / Working paper Y1 - 2005 IS - 32 PB - School of Business Administration, Intern. Univ. in Germany CY - Bruchsal ER - TY - CHAP A1 - Kroll-Ludwigs, Kathrin ED - Kosmehl, Guido T1 - Rechtssicherheit oder Verwirrspiel? - Die Beurteilung vorehelicher Unterhaltsverzichte nach dem Urteil des BGH vom 11.2.2004 T2 - Liber amicorum : Thomas Rauscher zum 50. Geburtstag Y1 - 2005 SN - 3936308721 SP - 95 EP - 113 PB - Ille und Riemer CY - Leipzig ER - TY - CHAP A1 - Kunfermann, Philipp A1 - Drumm, Christian T1 - Lifting XML schemas to ontologies - the concept finder algorithm T2 - MEDIATE 2005 First International Workshop on Mediation in Semantic Web Services Proceedings of the First International Workshop on Mediation in Semantic Web Services (MEDIATE 2005) Y1 - 2005 SP - 113 EP - 122 ER - TY - CHAP A1 - Dachwald, Bernd T1 - Global optimization of low-thrust space missions using evolutionary neurocontrol T2 - Proceedings of the international workshop on global optimization N2 - Low-thrust space propulsion systems enable flexible high-energy deep space missions, but the design and optimization of the interplanetary transfer trajectory is usually difficult. It involves much experience and expert knowledge because the convergence behavior of traditional local trajectory optimization methods depends strongly on an adequate initial guess. Within this extended abstract, evolutionary neurocontrol, a method that fuses artificial neural networks and evolutionary algorithms, is proposed as a smart global method for low-thrust trajectory optimization. It does not require an initial guess. The implementation of evolutionary neurocontrol is detailed and its performance is shown for an exemplary mission. KW - Evolutionary Neurocontrol KW - Spacecraft Trajectory Optimization KW - Low-Thrust Propulsion Y1 - 2005 SP - 85 EP - 90 ER - TY - CHAP A1 - Dachwald, Bernd A1 - Baturkin, Volodymyr A1 - Coverstone, Victoria A1 - Diedrich, Ben A1 - Garbe, Gregory A1 - Görlich, Marianne A1 - Leipold, Manfred A1 - Lura, Franz A1 - Macdonald, Malcolm A1 - McInnes, Colin A1 - Mengali, Giovanni A1 - Quarta, Alessandro A1 - Rios-Reyes, Leonel A1 - Scheeres, Daniel J. A1 - Seboldt, Wolfgang A1 - Wie, Bong T1 - Potential effects of optical solar sail degredation on trajectory design T2 - AAS/AIAA Astrodynamics Specialist N2 - The optical properties of the thin metalized polymer films that are projected for solar sails are assumed to be affected by the erosive effects of the space environment. Their degradation behavior in the real space environment, however, is to a considerable degree indefinite, because initial ground test results are controversial and relevant inspace tests have not been made so far. The standard optical solar sail models that are currently used for trajectory design do not take optical degradation into account, hence its potential effects on trajectory design have not been investigated so far. Nevertheless, optical degradation is important for high-fidelity solar sail mission design, because it decreases both the magnitude of the solar radiation pressure force acting on the sail and also the sail control authority. Therefore, we propose a simple parametric optical solar sail degradation model that describes the variation of the sail film’s optical coefficients with time, depending on the sail film’s environmental history, i.e., the radiation dose. The primary intention of our model is not to describe the exact behavior of specific film-coating combinations in the real space environment, but to provide a more general parametric framework for describing the general optical degradation behavior of solar sails. Using our model, the effects of different optical degradation behaviors on trajectory design are investigated for various exemplary missions. Y1 - 2005 N1 - 2005 AAS/AIAA Astrodynamics Specialist Conference, 7-11.08.2005. Lake Tahoe, California https://www.space-flight.org/AAS_meetings/2005_astro/2005_astro.html SP - 1 EP - 23 ER - TY - JOUR A1 - Grajewski, Matthias A1 - Hron, Jaroslav A1 - Turek, Stefan T1 - Dual weighted a posteriori error estimation for a new nonconforming linear finite element on quadrilaterals JF - Applied Numerical Mathematics N2 - After a short introduction of a new nonconforming linear finite element on quadrilaterals recently developed by Park, we derive a dual weighted residual-based a posteriori error estimator (in the sense of Becker and Rannacher) for this finite element. By computing a corresponding dual solution we estimate the error with respect to a given target error functional. The reliability and efficiency of this estimator is analyzed in several numerical experiments. Y1 - 2005 U6 - http://dx.doi.org/10.1016/j.apnum.2004.09.016 SN - 0168-9274 VL - 54 IS - 3-4 SP - 504 EP - 518 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Dahmen-Beumers, Judith T1 - Eine exemplarische Untersuchung zur Regionalität in der Kunst : der Aachener Bildhauer und Maler Benno Werth (*1929) KW - Kunstmarkt KW - Geschichte KW - Aachen Y1 - 2005 SN - 3-8334-3014-1 SN - 9783833430145 PB - Books on Demand CY - Norderstedt ER - TY - JOUR A1 - Dachwald, Bernd T1 - Optimization of very-low-thrust trajectories using evolutionary neurocontrol JF - Acta Astronautica N2 - Searching optimal interplanetary trajectories for low-thrust spacecraft is usually a difficult and time-consuming task that involves much experience and expert knowledge in astrodynamics and optimal control theory. This is because the convergence behavior of traditional local optimizers, which are based on numerical optimal control methods, depends on an adequate initial guess, which is often hard to find, especially for very-low-thrust trajectories that necessitate many revolutions around the sun. The obtained solutions are typically close to the initial guess that is rarely close to the (unknown) global optimum. Within this paper, trajectory optimization problems are attacked from the perspective of artificial intelligence and machine learning. Inspired by natural archetypes, a smart global method for low-thrust trajectory optimization is proposed that fuses artificial neural networks and evolutionary algorithms into so-called evolutionary neurocontrollers. This novel method runs without an initial guess and does not require the attendance of an expert in astrodynamics and optimal control theory. This paper details how evolutionary neurocontrol works and how it could be implemented. The performance of the method is assessed for three different interplanetary missions with a thrust to mass ratio <0.15mN/kg (solar sail and nuclear electric). Y1 - 2005 SN - 1879-2030 VL - 57 IS - 2-8 SP - 175 EP - 185 PB - Elsevier CY - Amsterdam [u.a.] ER - TY - JOUR A1 - Groß, Rolf Fritz A1 - Berger, J. T1 - Quo Vadis - Ausblick in die Gebäudeleittechnik der Zukunft T1 - Whitherfacility management? An outlook to the future JF - HLH. Heizung, Lüftung/Klima, Haustechnik N2 - Auf dem Weg zum vernetzten Haus stoßen Hersteller und Planer, insbesondere im privaten Wohnungsbau, zur Zeit noch auf erhebliche Widerstände bei der Durchdringung des Marktes. N2 - Producers and planners of facility management systems are still faced with building owners' reluctance, especially when it comes to private homes. Y1 - 2005 SN - 1436-5103 VL - 56 IS - 1 SP - 39 EP - 41 PB - Springer CY - Düsseldorf ER -