Conference Proceeding
Refine
Year of publication
Institute
- Fachbereich Luft- und Raumfahrttechnik (208) (remove)
Document Type
- Conference Proceeding (208) (remove)
Keywords
- hydrogen (4)
- solar sail (4)
- Eisschicht (3)
- Karosseriebau (3)
- MASCOT (3)
- Sonde (3)
- GOSSAMER-1 (2)
- Hydrogen (2)
- Micromix (2)
- NOx emissions (2)
- PCM (2)
- Spacecraft (2)
- Trajectory Optimization (2)
- combustor development (2)
- fuels (2)
- industrial gas turbine (2)
- multiple NEA rendezvous (2)
- small spacecraft (2)
- Aircraft design (1)
- Ansaugsystem (1)
- Antarctica (1)
- Asteroid Deflection (1)
- Attitude dynamics (1)
- Autofluoreszenzverfahren (1)
- Automated Optimization (1)
- Bumblebees (1)
- Capacity Building Higher Education (1)
- Correlations (1)
- Design rules (1)
- Drag (1)
- ESATAN (1)
- Electrical Flight (1)
- Emissions (1)
- Erasmus+ United (1)
- European Framework and South East Asia (1)
- Evolutionary Neurocontrol (1)
- Flame residence time (1)
- Flame temperature (1)
- Flight Mechanics (1)
- Flight Tests (1)
- Flight control (1)
- Fuel-flexibility (1)
- GEO (1)
- Gas turbine combustion (1)
- Geometry (1)
- Gossamer (1)
- Gossamer structures (1)
- Green aircraft (1)
- Guide Tube (1)
- Hybrid Propellants (1)
- Hybrid-electric aircraft (1)
- ITS (1)
- Inflight Regeneration, Recuperation (1)
- Infused Thermal Solutions (1)
- Interplanetary flight (1)
- Jupiter (1)
- Kalman filter (1)
- Karosserieleichtbau (1)
- LEO (1)
- Laminare Strömung (1)
- Laminarprofil (1)
- Leichtbau (1)
- Leichtbauwerkstoffe (1)
- Lichtstreuungsbasierte Instrumente (1)
- Lightweight car body construction (1)
- Low-Thrust Propulsion (1)
- MAV (1)
- Malaysian Automotive Industry (1)
- Malaysian automotive industry (1)
- Mars (1)
- Materialmischbauweise (1)
- Multiphase (1)
- NOx (1)
- Nozzle (1)
- Obstacle avoidance (1)
- Orbital dynamics (1)
- PEM fuel cells (1)
- PHILAE (1)
- Planetary Protection (1)
- Planetary exploration (1)
- Profilumströmung (1)
- Propeller Aerodynamics (1)
- RaWid (1)
- Reusable Rocket Engines (1)
- Sequence-Search (1)
- Small Solar System Body Lander (1)
- Small Spacecraft (1)
- Solar Power Sail (1)
- Solar Sail (1)
- Solar sail (1)
- Spacecraft Trajectory Optimization (1)
- Stahlblech-Leichtmetall Verbundguss (1)
- Stahlblech-Leichtmetall-Hybride (1)
- Statistics (1)
- Suction (1)
- TICTOP (1)
- Technology Transfer (1)
- UAV (1)
- UTeM Engineering Knowledge Transfer Unit (1)
- Unmanned Air Vehicle (1)
- Verbundguss (1)
- aircraft engine (1)
- asteroid lander (1)
- asteroid sample return (1)
- autofluorescence-based detection system (1)
- avalanche (1)
- aviation application (1)
- car body construction (1)
- combustion (1)
- combustor (1)
- contamination (1)
- control system (1)
- electrically driven compressors (1)
- electro mobility (1)
- emission (1)
- emission index (1)
- engine demonstration (1)
- flotilla missions (1)
- fuel cell (1)
- fuel cell systems (1)
- gas turbine (1)
- habitability (1)
- health management systems (1)
- heliosphere (1)
- hybrid laminar flow (1)
- ice moons (1)
- icy moons (1)
- internal combustion engine (1)
- ion propulsion (1)
- latent heat (1)
- lattice (1)
- life detection (1)
- light scattering analysis (1)
- low-thrust (1)
- low-thrust trajectory optimization (1)
- near-Earth asteroid (1)
- nitric oxides (1)
- operational aspects (1)
- passive thermal control (1)
- planetary defence (1)
- responsive space (1)
- sample return (1)
- small solar system body characterisation (1)
- small spacecraft asteroid lander (1)
- small spacecraft solar sail (1)
- snow (1)
- solar sails (1)
- solar system (1)
- space missions (1)
- star tracker (1)
- subglacial aquatic ecosystems (1)
- subroutine (1)
- subsurface ice (1)
- subsurface ice research (1)
- subsurface probe (1)
- suction structure (1)
- suction systems (1)
- system engineering (1)
- technology transfer (1)
- thermo-physical (1)
- underwater vehicle (1)
Infused Thermal Solutions (ITS) introduces a method for passive thermal control to stabilize structural components thermally without active heating and cooling systems, but with phase change material (PCM) for thermal energy storage (TES), in combination with lattice - both embedded in additive manufactured functional structures. In this ITS follow-on paper a thermal model approach and associated predictions are presented, related on the ITS functional breadboards developed at FH Aachen. Predictive TES by PCM is provided by a specially developed ITS PCM subroutine, which is applicable in ESATAN. The subroutine is based on the latent heat storage (LHS) method to numerically embed thermo-physical PCM behavior. Furthermore, a modeling approach is introduced to numerically consider the virtual PCM/lattice nodes within the macro-encapsulated PCM voids of the double wall ITS design. Related on these virtual nodes, in-plane and out-of-plane conductive links are defined. The recent additive manufactured ITS breadboard series are thermally cycled in the thermal vacuum chamber, both with and without embedded PCM. Related on breadboard hardware tests, measurement results are compared with predictions and are subsequently correlated. The results of specific simulations and measurements are presented. Recent predictive results of star tracker analyses are also presented in ICES-2021-106, based on this ITS PCM subroutine.
Flow separation is a phenomenon that occurs in all kinds of supersonic nozzles sometimes during run-up and shut-down operations. Especially in expansion nozzles of rocket engines with large area ratio, flow separation can trigger strong side loads that can damage the structure of the nozzle. The investigation presented in this paper seeks to establish measures that may be applied to alter the point of flow separation. In order to achieve this, a supersonic nozzle was placed at the exit plane of the conical nozzle. This resulted in the generation of cross flow surrounding the core jet flow from the conical nozzle. Due to the entrainment of the gas stream from the conical nozzle the pressure in its exit plane was found to be lower than that of the ambient. A Cold gas instead of hot combustion gases was used as the working fluid. A mathematical simulation of the concept was validated by experiment. Measurements confirmed the simulation results that due to the introduction of a second nozzle the pressure in the separated region of the conical nozzle was significantly reduced. It was also established that the boundary layer separation inside the conical nozzle was delayed thus allowing an increased degree of overexpansion. The condition established by the pressure measurements was also demonstrated qualitatively using transparent nozzle configurations.
Manufacturing Process Simulation for the Prediction of Tool-Part-Interaction and Ply Wrinkling
(2019)
Manufacturing Process Simulation for the Prediction of Tool-Part-Interaction and Ply Wrinkling
(2015)
The quest for life on other planets is closely connected with the search for water in liquid state. Recent discoveries of deep oceans on icy moons like Europa and Enceladus have spurred an intensive discussion about how these waters can be accessed. The challenge of this endeavor lies in the unforeseeable requirements on instrumental characteristics both with respect to the scientific and technical methods. The TRIPLE/nanoAUV initiative is aiming at developing a mission concept for exploring exo-oceans and demonstrating the achievements in an earth-analogue context, exploring the ocean under the ice shield of Antarctica and lakes like Dome-C on the Antarctic continent.
Having well-defined control strategies for fuel cells, that can efficiently detect errors and take corrective action is critically important for safety in all applications, and especially so in aviation. The algorithms not only ensure operator safety by monitoring the fuel cell and connected components, but also contribute to extending the health of the fuel cell, its durability and safe operation over its lifetime. While sensors are used to provide peripheral data surrounding the fuel cell, the internal states of the fuel cell cannot be directly measured. To overcome this restriction, Kalman Filter has been implemented as an internal state observer.
Other safety conditions are evaluated using real-time data from every connected sensor and corrective actions automatically take place to ensure safety. The algorithms discussed in this paper have been validated thorough Model-in-the-Loop (MiL) tests as well as practical validation at a dedicated test bench.
This work proposes a hybrid algorithm combining an Artificial Neural Network (ANN) with a conventional local path planner to navigate UAVs efficiently in various unknown urban environments. The proposed method of a Hybrid Artificial Neural Network Avoidance System is called HANNAS. The ANN analyses a video stream and classifies the current environment. This information about the current Environment is used to set several control parameters of a conventional local path planner, the 3DVFH*. The local path planner then plans the path toward a specific goal point based on distance data from a depth camera. We trained and tested a state-of-the-art image segmentation algorithm, PP-LiteSeg. The proposed HANNAS method reaches a failure probability of 17%, which is less than half the failure probability of the baseline and around half the failure probability of an improved, bio-inspired version of the 3DVFH*. The proposed HANNAS method does not show any disadvantages regarding flight time or flight distance.
Hydrostatic propeller drive
(2011)
The industrial revolution IR4.0 era have driven many states of the art technologies to be introduced especially in the automotive industry. The rapid development of automotive industries in Europe have created wide industry gap between European Union (EU) and developing countries such as in South-East Asia (SEA). Indulging this situation, FH Joanneum, Austria together with European partners from FH Aachen, Germany and Politecnico Di Torino, Italy is taking initiative to close the gap utilizing the Erasmus+ United grant from EU. A consortium was founded to engage with automotive technology transfer using the European ramework to Malaysian, Indonesian and Thailand Higher Education Institutions (HEI) as well as automotive industries. This could be achieved by establishing Engineering Knowledge Transfer Unit (EKTU) in respective SEA institutions guided by the industry partners in their respective countries. This EKTU could offer updated, innovative, and high-quality training courses to increase graduate’s employability in higher education institutions and strengthen relations between HEI and the wider economic and social environment by addressing Universityindustry cooperation which is the regional priority for Asia. It is expected that, the Capacity Building Initiative would improve the quality of higher education and enhancing its relevance for the labor market and society in the SEA partners. The outcome of this project would greatly benefit the partners in strong and complementary partnership targeting the automotive industry and enhanced larger scale international cooperation between the European and SEA partners. It would also prepare the SEA HEI in sustainable partnership with Automotive industry in the region as a mean of income generation in the future.