Article
Refine
Year of publication
Document Type
- Article (3226) (remove)
Language
- English (3226) (remove)
Keywords
- Einspielen <Werkstoff> (7)
- avalanche (5)
- Earthquake (4)
- FEM (4)
- Finite-Elemente-Methode (4)
- LAPS (4)
- biosensors (4)
- field-effect sensor (4)
- frequency mixing magnetic detection (4)
- CellDrum (3)
- Heparin (3)
- Label-free detection (3)
- additive manufacturing (3)
- capacitive field-effect sensor (3)
- hydrogen peroxide (3)
- magnetic nanoparticles (3)
- shakedown analysis (3)
- snow (3)
- tobacco mosaic virus (TMV) (3)
- Acyl-amino acids (2)
- Aeroelasticity (2)
- Aminoacylase (2)
- Bacillaceae (2)
- Bacillus atrophaeus (2)
- Biotechnological application (2)
- Brake set-up (2)
- CFD (2)
- Capacitive field-effect sensor (2)
- Chemometrics (2)
- Drinfeld modules (2)
- Einspielanalyse (2)
- Empirical process (2)
- Field-effect sensor (2)
- Freight rail (2)
- Goodness-of-fit test (2)
- Hot S-parameter (2)
- IR spectroscopy (2)
- Independence test (2)
- Light-addressable potentiometric sensor (2)
- Lipopolysaccharide (2)
- MINLP (2)
- NMR spectroscopy (2)
- Paired sample (2)
- Parametric bootstrap (2)
- Principal component analysis (2)
- Pump System (2)
- Raman spectroscopy (2)
- Shakedown analysis (2)
- Simulation (2)
- Standardization (2)
- Stiffness (2)
- Subtilases (2)
- Subtilisin (2)
- Traglastanalyse (2)
- Transcendence (2)
- UAV (2)
- bacterial cellulose (2)
- bubble column (2)
- capacitive field-effect sensors (2)
- carbonized rice husk (2)
- constructive alignment (2)
- damage (2)
- energy efficiency (2)
- examination (2)
- factory planning (2)
- fused filament fabrication (2)
- gold nanoparticles (2)
- harmonic radar (2)
- immobilization (2)
- impedance spectroscopy (2)
- light-addressable potentiometric sensor (2)
- likelihood ratio test (2)
- limit analysis (2)
- locomotion (2)
- long-term retention (2)
- manufacturing flexibility (2)
- methanation (2)
- multimodal (2)
- muscle fascicle behavior (2)
- not identically distributed (2)
- penicillinase (2)
- plug flow reactor (2)
- practical learning (2)
- prebiotic (2)
- qNMR (2)
- rapid tooling (2)
- shakedown (2)
- t-modules (2)
- ultrasound (2)
- ultrasound imaging (2)
- (Bio)degradation (1)
- (Poly)saccharides (1)
- 1P hub loads (1)
- 3-D printing (1)
- 3D nonlinear finite element model (1)
- 802.15.4 (1)
- Acceleration (1)
- Achilles tendon (1)
- Acylation (1)
- Adaptive control (1)
- Additive Manufacturing (1)
- Afterload (1)
- Ageing (1)
- Air purification (1)
- Aircraft sizing (1)
- Algal Turf Scrubber (1)
- Algal–bacterial bioflm (1)
- Alginate beads (1)
- Alkalihalobacillus okhensis (1)
- Aloe vera (1)
- AlterG (1)
- Alternating plasticity (1)
- Alzheimer's disease (1)
- Analysis (1)
- Analytischer Zulaessigkeitsnachweis (1)
- Anammox (1)
- Anastomotic leakage (1)
- Anatomy (1)
- Annulus Fibrosus (1)
- Antarctic Glaciology (1)
- Antibias (1)
- Architectural design (1)
- Architectural gear ratio (1)
- Artificial intelligence (1)
- Assembly (1)
- Assistive technology (1)
- Asymptotic efficiency (1)
- Authenticity (1)
- Autolysis (1)
- Automated driving (1)
- Automatic control (1)
- Automotive application (1)
- Automotive safety approach (1)
- Autonomy (1)
- Avalanche (1)
- Axialbelastung (1)
- Axially cracked pipe (1)
- Bacillus atrophaeus spores (1)
- Bacillus sp (1)
- Bacterial cellulose (1)
- Balance (1)
- Balanced hypergraph (1)
- Bank-issued Warrants (1)
- Basis Reduktion (1)
- Basis reduction (1)
- Bauingenieurwesen (1)
- Behaviour factor q (1)
- Benchmark (1)
- Bicharakteristikenverfahren (1)
- Bioabsorbable (1)
- Biocatalysis (1)
- Biocomposites (1)
- Biofuel (1)
- Biogas (1)
- Biomass (1)
- Biomechanical simulation (1)
- Bioreaktor (1)
- Biorefinery (1)
- Biosolubilization (1)
- Biosurfactants (1)
- Blade element method (1)
- Bloom’s Taxonomy (1)
- Bluetooth (1)
- Blutzellenlagerung (1)
- Bone quality and biomechanics (1)
- Booster Station (1)
- Booster Stations (1)
- Bootstrap (1)
- Bootstrapping (1)
- Borehole heat exchanger (1)
- Bragg peak (1)
- Brake test (1)
- Braking curves (1)
- Broad pH spectrum (1)
- Brownian Pillow (1)
- Buffering Capacity (1)
- Butanol (1)
- CAD (1)
- CAV (1)
- CNOT (1)
- CO2 emission reduction targets (1)
- CRISPR/Cas9 (1)
- Calorimetric gas sensor (1)
- Capacitive field-effect (1)
- Capacitive model (1)
- Carbon sources (1)
- Cardiac myocytes (1)
- Cardiac tissue (1)
- Cardiovascular MRI (1)
- Categorial variable (1)
- Cell permeability (1)
- Cellular force (1)
- Cellulose nanostructure (1)
- Cement infiltration (1)
- Cementoblast (1)
- Censored data (1)
- Chance Constraint (1)
- Chaperone (1)
- Chaperone co-expression (1)
- Charging station (1)
- Chemical images (1)
- Chemical imaging sensor (1)
- Chemical sensor (1)
- Chondroitin sulfate (1)
- Circuit simulation (1)
- Circular Dichroism (1)
- Circular bioeconomy (1)
- Civil engineering (1)
- Clinical decision support systems (1)
- Clostridium acetobutylicum (1)
- Clusterion (1)
- Co-managed care (1)
- Collective risk model (1)
- Commercial Vehicle (1)
- Common Rail Injection System (1)
- Competence Developing Games (1)
- Competitiveness (1)
- Complex System (1)
- Complex-valued eigenvalues (1)
- Compliance (1)
- Compression (1)
- Computational biomechanics (1)
- Concomitant (1)
- Conductive Boundary Condition (1)
- Consensus (1)
- Constitutive model (1)
- Contractile tension (1)
- Contractility (1)
- Convex optimization (1)
- Cost function (1)
- Cost-effectiveness (1)
- Coverage probability (1)
- Cramér-von-Mises statistic (1)
- Cramér-von-Mises test (1)
- Crashworthiness (1)
- Cross border adjustment mechanism (1)
- Crude heparin (1)
- Crámer–von-Mises distance (1)
- Culture media (1)
- Cyclotron production (1)
- C–V method (1)
- DLR-ESTEC GOSSAMER roadmap for solar sailing (1)
- DNA biosensor (1)
- DNA hybridization (1)
- DPA (dipicolinic acid) (1)
- Damage mechanics theory (1)
- Decomposition (1)
- Decoupling (1)
- Deformation (1)
- Dehydrogenase (1)
- Design-by-analysis (1)
- Detergent protease (1)
- Deuterated solvents (1)
- Deuterium NMR (1)
- Diaphorase (1)
- Diesel Engine (1)
- Dietary supplements (1)
- Disc Degeneration (1)
- Discontinuous fractures (1)
- Discourse ethics (1)
- Discrete Optimization (1)
- Disposition Effect (1)
- Distributed Control Systems, (1)
- Diversity Management (1)
- Drag estimation (1)
- Driver assistance system (1)
- Driving cycle recognition (1)
- Druckbeanspruchung (1)
- Druckbehälter (1)
- Druckbelastung (1)
- Druckgeräte (1)
- Drug simulation (1)
- Dry-low-NOx (DLN) combustion (1)
- Duality (1)
- Dynamic simulation (1)
- E-Mobility (1)
- ECMS (1)
- EIS capacitive sensor (1)
- ELISA (1)
- ES-FEM (1)
- Effective modal mass (1)
- Eigenvalue trajectories (1)
- Einspiel-Analyse (1)
- Einspiel-Kriterium (1)
- Einspielen (1)
- Elastizität (1)
- Elderly (1)
- Electrolyte–insulator–semiconductor (1)
- Electromagnetism (1)
- Electromechanical modeling (1)
- Electronic vehicle (1)
- Elemental (1)
- Emilia-Romagna earthquake (1)
- Empirical consequence curves (1)
- Empirical fragility functions (1)
- End-to-end colorectal anastomosis (1)
- Endothelial cells (1)
- Endothelial dysfunction (1)
- Energy management strategies (1)
- Energy-intensive industry (1)
- Engineering Application (1)
- Engineering Habitus (1)
- Enterprise information systems (1)
- Environmental impact (1)
- Enzymatic biosensor (1)
- Enzyme coverage (1)
- Enzyme logic gate (1)
- Enzyme-linked immunosorbent assay (1)
- Epithel (1)
- Equivalence test (1)
- Esophageal Doppler monitor (1)
- European Transient Cycle (1)
- Eutectic Silver Copper alloy (1)
- Experiment (1)
- Experimental validation (1)
- Explainability (1)
- External knee adduction moments (1)
- Extracellular enzymes (1)
- Extraterrestrial Glaciology (1)
- FS-FEM (1)
- Fall prevention (1)
- Fault approximation (1)
- Fault detection (1)
- Feature selection (1)
- Fehlerstellen (1)
- Fibroblast (1)
- Field effect (1)
- Field-effect biosensor (1)
- Finite differences (1)
- Finite element analysis (1)
- Finite element method (1)
- Finite element modelling (1)
- Finland (1)
- Fließgrenze (1)
- Floor prices (1)
- Flutter (1)
- Force (1)
- Forces (1)
- Fracture classification (1)
- Fracture configuration (1)
- Fracture simulation (1)
- Frame structure (1)
- Freeze–thaw process (1)
- Frequency adaption (1)
- Frequency mixing magnetic detection (1)
- Full-vehicle crash test (1)
- Functional Delta Method (1)
- Furnace (1)
- Fusion (1)
- GOSSAMER-1 (1)
- Ga-68 (1)
- Game-based learning (1)
- Gamification (1)
- Gamma distribution (1)
- Genetic algorithm (1)
- Geriatric (1)
- German (1)
- Germany (1)
- Glaciological instruments and methods (1)
- Glaucoma (1)
- Global and local collapse (1)
- Glucosamine (1)
- Gold nanoparticles (1)
- Goodness-of-fit tests for uniformity (1)
- Grenzwertberechnung (1)
- Ground-level falls (1)
- Hadamard differentiability (1)
- Haemodialysis (1)
- Hall’s Theorem (1)
- Halotolerant protease (1)
- Handbike (1)
- Harnleiter (1)
- Hazard assessment (1)
- Heart tissue culture (1)
- Heat transport (1)
- Hemoglobin structure (1)
- Heterostructure (1)
- High hydrogen combustion (1)
- High-field NMR (1)
- Higher derivations (1)
- Hip fractures (1)
- Hodgkin–Huxley models (1)
- Hoeffding-Blum-Kiefer-Rosenblatt independence test (1)
- Homogenization (1)
- Hotelling’s T² test (1)
- Human factors (1)
- Human-Computer interaction (1)
- Hydrogen combustion (1)
- Hydrogen gas turbine (1)
- Hydrogen peroxide (1)
- Hyperdifferentials (1)
- Hypergraph (1)
- Hypersecretion (1)
- Hämoglobin (1)
- Hämoglobinstruktur (1)
- INSYSME (1)
- IP-based networks (1)
- IR (1)
- IT security education (1)
- Illustration (1)
- Image Reconstruction (1)
- Imaging (1)
- Impedance spectroscopy (1)
- In-plane performance, isolation (1)
- Incident analysis (1)
- Inclusion bodies (1)
- Incomplete data (1)
- Individual Investors (1)
- Induced pluripotent stem cells (1)
- Industrial Automation Technology, (1)
- Infill wall design (1)
- Information extraction (1)
- Inorganic ions (1)
- Inotropic compounds (1)
- Instructional design (1)
- Integrated empirical distribution (survival) function (1)
- Interior transmission problem (1)
- Interstellar objects (1)
- Intervertebral Disc (1)
- Intradiscal Pressure (1)
- Inverse Scattering (1)
- Inverse dynamic problem (1)
- Inverse kinematic problem (1)
- Inverse scattering problem (1)
- Ion channels (1)
- Ions (1)
- Iterative learning control (1)
- Justice (1)
- Keyword analysis (1)
- Kinetic energy (1)
- Knochen (1)
- Knochenbildung (1)
- Knochenchirugie (1)
- Knochendichte (1)
- Koenig’s Theorem (1)
- Kohlenstofffaser (1)
- LPS (1)
- Lab-on-Chip (1)
- Lactobacillus rhamnosus GG (1)
- Landslide tsunamis (1)
- Langevin theory (1)
- Large scale tests (1)
- Latvia (1)
- Layer-by-layer adsorption (1)
- LbL films (1)
- Left ventriular function (1)
- Level system (1)
- Lidar (1)
- Light-addressable Potentiometric Sensor (1)
- Lignocellulose (1)
- Limit analysis (1)
- Linear discriminant analysis (1)
- Linear elastic analysis (1)
- Liver (1)
- Local path planning (1)
- Long COVID (1)
- Low-field NMR (1)
- Luftreiniger (1)
- MCDA (1)
- MILP (1)
- MOS (1)
- MR-stethoscope (1)
- MST (1)
- MUT measurement; scanner (1)
- Machine learning (1)
- Magnetic field strength (1)
- Magnetic nanoparticles (1)
- Magnetic resonance imaging (MRI) (1)
- Mainstream (1)
- Manipulated variables (1)
- Manufacturer (1)
- Marginal homogeneity test (1)
- Marker-free mutagenesis (1)
- Masonry infill (1)
- Masonry partition walls (1)
- Matching (1)
- Materialermüdung (1)
- Measurement models (1)
- Measurement uncertainty (1)
- Mechanotransduction (1)
- Medical AI (1)
- Medical radionuclide production (1)
- Medusomyces gisevi (1)
- Metal contaminants (1)
- Metascintillator (1)
- Methane (1)
- Microcirculation (1)
- Microfluidic solvent extraction (1)
- Micromagnetic simulation (1)
- Micromix combustion (1)
- Mikrosystemtechnik (1)
- Mild cognitive impairment (1)
- Missions (1)
- Mobility (1)
- Mobility tests (1)
- Mobility transition (1)
- Mode converter (1)
- Model-driven software engineering (1)
- Modelica (1)
- Modeling (1)
- Modelling (1)
- Modern constructions (1)
- Molecular modelling (1)
- Molecular weight determination (1)
- Molten salt receiver system (1)
- Molten salt solar tower (1)
- Monte Carlo Tree Search (1)
- Morphing (1)
- Multi-criteria decision analysis (1)
- Multi-objective optimization (1)
- Multi-sample problem (1)
- Multi-storey (1)
- Multianalyte detection (1)
- Multicell (1)
- Multiple TOF kernels (1)
- Multiplexing (1)
- Multirotor UAS (1)
- Muscle (1)
- Muscle Fascicle (1)
- Muscle Force (1)
- Musculoskeletal model (1)
- Musculoskeletal system (1)
- Myocardial infarction and cardiac death (1)
- NGN (1)
- NMR (1)
- NMR exchange relaxometry (1)
- NONOate (1)
- Natural fibres (1)
- Natural frequency (1)
- Negative Feedback Trading (1)
- Negative impedance convertor (1)
- Neural Network (1)
- Nitric Oxide (1)
- Nitric Oxide Donor (1)
- Nitrogen removal (1)
- Non-parallel fissures (1)
- Nonequilibrium dynamics (1)
- Nonlinear Dynamics (1)
- Normative standards (1)
- Nucleus Pulposus (1)
- Numerical inversion of Laplace transforms (1)
- Numerical linear algebra (1)
- Numerical modelling (1)
- O2 plasma (1)
- Obstacle avoidance (1)
- Ocular blood flow (1)
- Organic acids (1)
- Organic light-emitting diode display (1)
- Organizational Culture (1)
- Organkultur (1)
- Osteoporose (1)
- Osteoporosis (1)
- Out-of-plane capacity (1)
- Overland flow (1)
- P2G (1)
- PBEE (1)
- PIV (1)
- PLS-regression (1)
- PROFINET (1)
- Paralympic sport (1)
- Parasitic drag (1)
- Parking (1)
- Partial nitritation (1)
- Path planning (1)
- Penicillin (1)
- Periods (1)
- Permeability (1)
- Permeabilität (1)
- Peroxidase (1)
- Pflanzenphysiologie (1)
- Pflanzenscanner (1)
- Pflanzenstress (1)
- Pharmacology (1)
- Physiology (1)
- Piping (1)
- Plant virus (1)
- Plasma (1)
- Plasma diagnostics (1)
- Plasmacluster ion technology (1)
- Plastizität (1)
- Poly(allylamine hydrochloride) (1)
- Poly(d,l-lacticacid) (1)
- Polyimide (1)
- Polylactide acid (1)
- Polymer-matrix composites (1)
- Polysaccharides (1)
- Porositat (1)
- Post-COVID-19 syndrome (1)
- Powertrain (1)
- Precast buildings (1)
- Predictive battery discharge (1)
- Preference assessment (1)
- Pressure loaded crack-face (1)
- Prevention (1)
- Probability distribution mapping (1)
- Process virtualization (1)
- Product bundling (1)
- Product-integration (1)
- Progressive plastic deformation (1)
- Propeller (1)
- Propeller elasticity (1)
- Propeller whirl flutter (1)
- Proper Orthogonal Decomposition (1)
- Prophylaxis (1)
- Proximal humerus fracture (1)
- Pulsations (1)
- Pumping systems (1)
- Q-criterion (1)
- Quality control (1)
- Quantum chemistry (1)
- RAMMS (1)
- RVA (1)
- Radar (1)
- Rapid Prototyping (1)
- Rapid Technologie (1)
- Rapid prototyping (1)
- Ratchetting (1)
- Raumluft (1)
- Real-time monitoring (1)
- Recombinant activated protein C (1)
- Red blood cell storage (1)
- Regionalization (1)
- Rehabilitation Technology and Prosthetics (1)
- Rehabilitation engineering (1)
- Reinforced concrete frame (1)
- Requirements prioritization (1)
- Requirements relations (1)
- Resampling test (1)
- Reservation system (1)
- Resistive temperature detector (1)
- Resolvent Operator (1)
- Resonance-mode measurement (1)
- Response Surface Method (1)
- Retinal vessel analysis (1)
- Retinal vessels (1)
- Robotic rehabilitation (1)
- Rohr (1)
- Rohrbruch (1)
- Rotary encoder (1)
- Rotator cuff (1)
- Running (1)
- S-FEM (1)
- SFCW (1)
- SLM (1)
- SOA (1)
- ScaLAPACK (1)
- Schwammknochen (1)
- Seismic design (1)
- Seismic loading (1)
- Selective Catalytic Reduction (1)
- Self-driving (1)
- Semi-parametric random censorship model (1)
- Septic cardiomyopathy (1)
- Services (1)
- Shakedown (1)
- Shakedown criterion (1)
- Shoulder (1)
- Shunting (1)
- Silk fibroin (1)
- Simultaneous determination (1)
- Skeletal muscle (1)
- Slab deflection (1)
- Small Aral Sea (1)
- Small spacecraft (1)
- Snow (1)
- Sn₃O₄ (1)
- Soft independent modeling of class analogy (1)
- Software and systems modeling (1)
- Solar sail (1)
- Solitary waves (1)
- Spectroscopy (1)
- Spleen (1)
- Stahl (1)
- Steel industry (1)
- Stenotrophomonas maltophilia (1)
- Sterilisation process (1)
- Stochastic Programming (1)
- Streptomyces griseus (1)
- Streptomyces lividans (1)
- Stress concentrations (1)
- Structural design (1)
- Strukturanalyse (1)
- Subclacial exploration (1)
- Subglacial lakes (1)
- Surgical Navigation and Robotics (1)
- Surgical staplers (1)
- Survival analysis (1)
- Suspension bridge (1)
- TMV adsorption (1)
- TOF PET (1)
- Tank (1)
- Ta₂O₅ gate (1)
- Technical Operations Research (1)
- Technical Operations Research (TOR) (1)
- Telecommunication (1)
- Temperaturabhängigkeit (1)
- Tendon Rupture (1)
- Tendon properties (1)
- Tendons (1)
- Tension (1)
- Thin shell finite elements (1)
- Tinetti test (1)
- Tissue Engineering (1)
- Tobacco mosaic virus (TMV) (1)
- Tool support (1)
- Trading Behavior (1)
- Traglast (1)
- Train composition (1)
- Trajectories (1)
- Transformation (1)
- Transient flux distribution (1)
- Transmission Eigenvalues (1)
- Two-phase modelling (1)
- Typographie (1)
- USP (1)
- Ultrasound (1)
- Uncertainty (1)
- Uniaxial compression test (1)
- Unreinforced masonry buildings (1)
- Unsteady aerodynamics (1)
- Uracil-phosphoribosyltransferase (1)
- User study (1)
- Utilization improvement (1)
- VM (1)
- VOF (1)
- Vapnik–Čhervonenkis class (1)
- Variable height stapler design (1)
- Vascular response (1)
- Vasomotions (1)
- Velocity (1)
- Vertebroplastie (1)
- Vertebroplasty (1)
- Vertex cover (1)
- Vibrio natriegens (1)
- Virtual reality (1)
- Virtuelle Maschine (1)
- Viscous flow (1)
- Viskose Strömung (1)
- Viskosität (1)
- Visual field asymmetry (1)
- Volterra integral equation (1)
- Volume of confidence regions (1)
- Volume status (1)
- Wastewater (1)
- Water Distribution (1)
- Water Supply Networks (1)
- Wiegand sensor (1)
- Wind milling (1)
- Wind tunnel experiments (1)
- Wireless Networks (1)
- Wolff's Law (1)
- Wolffsches Gesetz (1)
- Wundheilung (1)
- XOR (1)
- Zeta potential (1)
- Zug-Druck Belastung (1)
- acetoin (1)
- acetoin reductase (1)
- achilles tendon (1)
- actin cytoskeleton (1)
- actuator-sensor system (1)
- adaptive systems (1)
- adipose-derived stromal cells (ASCs) (1)
- adsorption (1)
- agility (1)
- alcoholic beverages (1)
- allocation (1)
- alternierend Verformbarkeit (1)
- aminooctanethiol (1)
- amperometric biosensors (1)
- anaesthetic complications (1)
- anammox (1)
- anisotropy (1)
- annealing (1)
- aortic perfusion (1)
- aromatic amines (1)
- artificial intelligence (1)
- artificial olfactory image (1)
- aseptic parameters (1)
- aspergillus (1)
- assistance system (1)
- asymptotic relative efficiency (1)
- atomic layer deposition (1)
- automated vehicles (1)
- autonomous navigation (1)
- availability (1)
- barium strontium titanate (1)
- batteries and fuel cells (1)
- bi-enzyme biosensor (1)
- biaxial tensile experiment (1)
- bicharacteristics (1)
- bio-methane (1)
- bioavailability (1)
- bioburdens (1)
- biocompatible (1)
- biocompatible materials (1)
- biodegradabl (1)
- biodegradable electronic devices (1)
- biodegradable polymers (1)
- biofilms (1)
- biological dosimeter (1)
- biomechanics (1)
- biomethane (1)
- biopotential electrodes (1)
- biosensor (1)
- body imaging at 7 T MRI (1)
- body limbs (1)
- bone density (1)
- bone structure (1)
- bootstrap (1)
- borefields (1)
- borehole disposal (1)
- brachytherapy (1)
- building energy modelling (1)
- building energy simulation (1)
- burst pressure (1)
- burst tests (1)
- calorimetric gas sensor (1)
- calorimetric gas sensor;hydrogen peroxide;wireless sensor system (1)
- cancellous bone (1)
- capacitive EIS sensor (1)
- capacitive electrolyte–insulator–semiconductor sensors (1)
- capacitive model (1)
- carbon electrodes (1)
- cardiac gating (1)
- cardiomyocyte biomechanics (1)
- cardiovascular MR imaging (1)
- catalytic metal (1)
- cell aerosolization (1)
- cell atomization (1)
- central symmetry test (1)
- cerebral small vessel disease (1)
- chance constrained programming (1)
- change management (1)
- chemical sensor (1)
- churches (1)
- civil engineering (1)
- climate change (1)
- coculture (1)
- cognitive impairment (1)
- coherent structures (1)
- colorization (1)
- community dwelling (1)
- complete block symmetry (1)
- compression behavior (1)
- computational fluid dynamics analysis (1)
- concentrating collector (1)
- conditional excess distribution (1)
- conditional expectation principle (1)
- confidence interval (1)
- connected automated vehicles (1)
- connective tissue (1)
- constitutive modeling (1)
- contactless conductivity sensor (1)
- control gate (1)
- correlation (1)
- coupled Néel–Brownian relaxation dynamics (1)
- covariance principle (1)
- crop yield (1)
- crystallization (1)
- cyber-physical production systems (1)
- dam-break (1)
- debris flow (1)
- deficit irrigation (1)
- dental trauma (1)
- deserts (1)
- design of technical systems (1)
- detection of charged macromolecules (1)
- detergent protease (1)
- dialysis (1)
- difficult airway (1)
- digital factory (1)
- direct method (1)
- disposal facility (1)
- distorted element (1)
- distribution grid simulation (1)
- diversity management (1)
- double-lumen tube intubation (1)
- drag force (1)
- drop jump (1)
- drug metabolising enzymes (1)
- drug–drug interactions (1)
- e-mobility (1)
- eVTOL development (1)
- eVTOL safety (1)
- earthquake engineering (1)
- ecological structure (1)
- eigensolvers (1)
- elastic solids (1)
- elastomers (1)
- electrocardiogram (1)
- electrolyte-insulator semiconductor sensor (EIS) (1)
- electrolyte-insulator-semiconductor capacitors (1)
- electromyography (1)
- electronic nose (1)
- electrospinning (1)
- encapsulation materials (1)
- endoluminal (1)
- endospores (1)
- energy (1)
- energy absorption (1)
- energy dissipation (1)
- energy transfer (1)
- engineering (1)
- entrepreneurship education (1)
- enzymatic (bio)degradation (1)
- enzymatic biosensor (1)
- enzyme cascade (1)
- enzyme kinetics (1)
- enzyme-logic gate (1)
- epithelization (1)
- equivalent circuit (1)
- equivalent stiffness (1)
- event-based simulation (1)
- exchangeability test (1)
- exopolysaccharides (1)
- experimental evaluation (1)
- extracorporeal membrane oxygenation (1)
- eye movement modelling examples (1)
- fatigue analyses (1)
- fibers (1)
- fibroin (1)
- field-effect structure (1)
- filamentous fungi (1)
- flaw (1)
- force generation (1)
- forecast (1)
- forehead EEG (1)
- fortschreitende plastische Deformation (1)
- frequency mixing (1)
- fuel cell vehicle (1)
- functional data (1)
- gait (1)
- gamification (1)
- gas sensor (1)
- gaseous hydrogen peroxide (1)
- genetic algorithm (1)
- genome engineering (1)
- geological disposal (1)
- geothermal (1)
- global optimization (1)
- glucose (1)
- glucose oxidase (GOx) (1)
- glycine (1)
- goodness-of-fit test (1)
- granular silo (1)
- graphene oxide (1)
- halotolerant protease (1)
- harmonic radar tags (1)
- healthy aging (1)
- heat demand (1)
- heat transfer coefficient (1)
- heating system (1)
- heavy metals (1)
- hiPS cardiomyocytes (1)
- high field MR imaging (1)
- high-alkaline subtilisin (1)
- high-intensity exercise (1)
- high-k material (1)
- horseradish peroxidase (HRP) (1)
- huge dimensional data (1)
- human dermal fibroblasts (1)
- human metabolites (1)
- humic acid (1)
- hydraulic modelling (1)
- hydrogel (1)
- hydrogels (1)
- hydroxylation (1)
- hyper-gravity (1)
- hyperelastic (1)
- hypo-gravity (1)
- hypoplasticity (1)
- ignition (1)
- impulsive effects (1)
- in-ear EEG (1)
- in-situ monitoring (1)
- incontinence (1)
- independence test (1)
- industrial agents (1)
- infill strategy (1)
- innovation management (1)
- intelligent control (1)
- intelligent energy management (1)
- intraclass correlation coefficient (1)
- irradiation (1)
- key performance indicators (1)
- konvexe Optimierung (1)
- lable-free detection (1)
- large language models (1)
- large-scale inspection (1)
- layer-by-layer technique (1)
- legal obligations (1)
- light-addressable electrode (1)
- light-addressing technologies (1)
- lignite (1)
- limit load (1)
- lipopolysaccharide (1)
- lipopolysaccharides (1)
- liquid-storage tank (1)
- liquid-structure interaction (1)
- lizards (1)
- load limit (1)
- low-rank coal (1)
- machine learning (1)
- macro-element (1)
- magnetic actuation (1)
- magnetic beads (1)
- magnetic biosensing (1)
- magnetic relaxation (1)
- magnetic resonance imaging (1)
- magnetic sandwich immunoassay (1)
- magnetic sensing (1)
- magnetic sensors (1)
- magnetic separation (1)
- magnetic tweezers (1)
- magnetophoretic velocity (1)
- mainstream deammonification (1)
- manufacturing (1)
- manufacturing data model (1)
- mathematical optimization (1)
- mechanical buffer (1)
- mechanical properties (1)
- metagenomics (1)
- metal-oxide-semiconductor structure (1)
- microbial diversity (1)
- microfluidics (1)
- micromagnetic simulation (1)
- micronutrients (1)
- microplasma (1)
- microwave (MW) plasma (1)
- microwave measurements (1)
- mix flexibility (1)
- mixed-integer linear programming (1)
- mobile manipulation (1)
- model performance (1)
- multi-agent systems (1)
- multi-functional material (1)
- multi-sensing platform (1)
- multianalyte detection (1)
- multinomial distribution (1)
- multiparametric immunoassays (1)
- multiplex detection (1)
- multivariate normal distribution (1)
- muscle mechanics (1)
- nanobelts (1)
- nanomaterials (1)
- nanoparticle coverage (1)
- nanostructured carbonized plant parts (1)
- nanostrukturierte carbonisierte Pflanzenteile (1)
- naphtols (1)
- neutrons (1)
- next generation network (1)
- nitrogen elimination (1)
- non-simplex S-FEM elements (1)
- nonlinear VNA measurements (1)
- nonlinear radar (1)
- nonlinear transient analyses (1)
- novel photoexcitation method (1)
- nuclear waste (1)
- numerical model (1)
- on-chip integrated addressable EISCAP sensors (1)
- onion (1)
- optical fibers (1)
- optical sensor setup (1)
- optical spore trapping (1)
- optical trapping (1)
- optimization (1)
- optimization system (1)
- organosilanes (1)
- overload (1)
- oxidative stable protease (1)
- pH sensors (1)
- parabolic flight (1)
- penicillin (1)
- performance analysis (1)
- performance testing (1)
- phenols (1)
- phonocardiogram (1)
- photoelectrochemistry (1)
- physical model (1)
- physiology (1)
- pipes (1)
- plant scanner (1)
- plant stress (1)
- plant virus detection (1)
- plasma jet (1)
- plug-based microfluidic device (1)
- point-focussing system (1)
- poly(d, l-lactic acid) (1)
- polyaniline (1)
- polyaspartic acid (1)
- polyetheretherketone (1)
- polyetheretherketone (PEEK) (1)
- polystyrene sulfonate (1)
- porous materials (1)
- portfolio risk (1)
- power-to-gas (1)
- prevention (1)
- product bundling (1)
- product liability (1)
- production planning and control (1)
- programming (1)
- prostate cancer (1)
- prostatectomy (1)
- proton therapy (1)
- protons (1)
- psychosocial (1)
- pullulan (1)
- quality of life (1)
- random effects (1)
- random effects meta-regression model (1)
- ratchetting (1)
- raytracing (1)
- recombinant expression (1)
- rehabilitation (1)
- relative dosimetry (1)
- reliability analysis (1)
- reliability of structures (1)
- remote sensing (1)
- research association (1)
- resilience (1)
- retention time (1)
- retinal microvasculature (1)
- retinal vessels (1)
- rubber (1)
- running (1)
- sEMG (1)
- sarcomere operating length (1)
- scanned light pulse technique (1)
- seismic response (1)
- semantic role labeling (1)
- separable Hilbert space (1)
- series elastic element behavior (1)
- service-oriented architectures (1)
- shakedown analyses (1)
- shotgun sequencing (1)
- shoulder (1)
- silanization (1)
- simulation (1)
- sizing (1)
- slum classification (1)
- smart-charging (1)
- smooth muscle contraction (1)
- soil amendment (1)
- soil health (1)
- soil remediation (1)
- solar process heat (1)
- spatial resolution (1)
- speaker attribution (1)
- spore kill rate (1)
- sprint start (1)
- standard error of measurement (1)
- sterilisation (1)
- sterility (1)
- sterility tests (1)
- sterilization (1)
- sterilization conditions (1)
- sterilization efficacy (1)
- sterilization methods (1)
- stiffness (1)
- stochastic optimization (1)
- stochastic programming (1)
- strain energy function (1)
- stretch reflex (1)
- stretch-shortening cycle (1)
- structure-soil-structure interaction (1)
- superabsorbent polymers (1)
- superparamagnetic bead (1)
- superparamagnetic nanoparticles (1)
- supramolecular structures (1)
- surface functionalization (1)
- surface modification (1)
- surface-orthogonal path planning (1)
- survival (1)
- sustainability (1)
- swelling properties (1)
- swimming (1)
- system optimization (1)
- system synthesis (1)
- technical operations research (1)
- technology planning (1)
- telecommunication (1)
- temperature (1)
- tendon rupture (1)
- tension–torsion loading (1)
- test-retest reliability (1)
- theory and modeling (1)
- thermal dose (1)
- thermal ratcheting (1)
- tilted constant illumination (1)
- tissue temperature (1)
- titanium dioxide photoanode (1)
- transmit antenna arrays (1)
- transponder (1)
- transporters (1)
- tri-lineage differentiation (1)
- truss (1)
- turnip vein clearing virus (TVCV) (1)
- twin-fluid atomizer (1)
- ultrasonography (1)
- ultrathin gate insulators (1)
- uniformly most powerful invariant test (1)
- unloading (1)
- urease (1)
- validation methods (1)
- vault (1)
- vessels (1)
- video learning (1)
- videolaryngoscopy (1)
- virgin passive (1)
- virtual clean room (1)
- viscoelasticity (1)
- visualization (1)
- volume flexibility (1)
- walking (1)
- walking gait (1)
- wastewater (1)
- water economy (1)
- water supply design (1)
- wind turbine production (1)
- wound healing (1)
- yield (1)
- yield stress (1)
- α-aminoacylase (1)
- ε-lysine acylase (1)
Institute
- Fachbereich Medizintechnik und Technomathematik (1343)
- INB - Institut für Nano- und Biotechnologien (501)
- Fachbereich Chemie und Biotechnologie (466)
- IfB - Institut für Bioengineering (408)
- Fachbereich Elektrotechnik und Informationstechnik (401)
- Fachbereich Energietechnik (360)
- Fachbereich Luft- und Raumfahrttechnik (247)
- Fachbereich Maschinenbau und Mechatronik (147)
- Fachbereich Wirtschaftswissenschaften (106)
- Fachbereich Bauingenieurwesen (68)
- Solar-Institut Jülich (43)
- ECSM European Center for Sustainable Mobility (27)
- Sonstiges (21)
- Institut fuer Angewandte Polymerchemie (20)
- Freshman Institute (17)
- Nowum-Energy (16)
- MASKOR Institut für Mobile Autonome Systeme und Kognitive Robotik (15)
- Fachbereich Gestaltung (12)
- Fachbereich Architektur (9)
- ZHQ - Bereich Hochschuldidaktik und Evaluation (5)
The aerodynamic performance of propellers strongly depends on their geometry and, consequently, on aeroelastic deformations. Knowledge of the extent of the impact is crucial for overall aircraft performance. An integrated simulation environment for steady aeroelastic propeller simulations is presented. The simulation environment is applied to determine the impact of elastic deformations on the aerodynamic propeller performance. The aerodynamic module includes a blade element momentum approach to calculate aerodynamic loads. The structural module is based on finite beam elements, according to Timoshenko theory, including moderate deflections. Several fixed-pitch propellers with thin-walled cross sections made of both isotropic and non-isotropic materials are investigated. The essential parameters are varied: diameter, disc loading, sweep, material, rotational, and flight velocity. The relative change of thrust between rigid and elastic blades quantifies the impact of propeller elasticity. Swept propellers of large diameters or low disc loadings can decrease the thrust significantly. High flight velocities and low material stiffness amplify this tendency. Performance calculations without consideration of propeller elasticity can lead to decreased efficiency. To avoid cost- and time-intense redesigns, propeller elasticity should be considered for swept planforms and low disc loadings.
High aerodynamic efficiency requires propellers with high aspect ratios, while propeller sweep potentially reduces noise. Propeller sweep and high aspect ratios increase elasticity and coupling of structural mechanics and aerodynamics, affecting the propeller performance and noise. Therefore, this paper analyzes the influence of elasticity on forward-swept, backward-swept, and unswept propellers in hover conditions. A reduced-order blade element momentum approach is coupled with a one-dimensional Timoshenko beam theory and Farassat's formulation 1A. The results of the aeroelastic simulation are used as input for the aeroacoustic calculation. The analysis shows that elasticity influences noise radiation because thickness and loading noise respond differently to deformations. In the case of the backward-swept propeller, the location of the maximum sound pressure level shifts forward by 0.5 °, while in the case of the forward-swept propeller, it shifts backward by 0.5 °. Therefore, aeroacoustic optimization requires the consideration of propeller deformation.
On the Vanishing Displacement Current Limit for Eddy-Current Problems / Quell, P. ; Reißel, M.
(1996)
This paper investigates the interior transmission problem for homogeneous media via eigenvalue trajectories parameterized by the magnitude of the refractive index. In the case that the scatterer is the unit disk, we prove that there is a one-to-one correspondence between complex-valued interior transmission eigenvalue trajectories and Dirichlet eigenvalues of the Laplacian which turn out to be exactly the trajectorial limit points as the refractive index tends to infinity. For general simply-connected scatterers in two or three dimensions, a corresponding relation is still open, but further theoretical results and numerical studies indicate a similar connection.
Antibias training is increasingly demanded and practiced in academia and industry to increase employees’ sensitivity to discrimination, racism, and diversity. Under the heading of “Diversity Management,” antibias trainings are mainly offered as one-off workshops intending to raise awareness of unconscious biases, create a diversity-affirming corporate culture, promote awareness of the potential of
diversity, and ultimately enable the reflection of diversity in development processes. However, coming from childhood education, research and scientific articles on the sustainable effectiveness of antibias in adulthood, especially in academia, are very scarce. In order to fill this research gap, the article aims to explore how sustainable the effects of individual antibias trainings on participants’ behavior are. In order to investigate this, participant observation in a qualitative pre–post setting was conducted, analyzing antibias training in an academic context. Two observers actively participated in the training sessions and documented the activities and reflection processes of the participants. Overall, the results question the effectiveness of single antibias trainings and show that a target-group adaptive approach is mandatory owing to the background of the approach in early childhood education. Therefore, antibias work needs to be adapted to the target group’s needs and realities of life. Furthermore, the study reveals that single antibias trainings must be embedded in a holistic diversity management approach to stimulate sustainable reflection processes among the target group. This article is one of the first to scientifically evaluate antibias training effectiveness, especially in engineering sciences and the university context.
One-chip integrated dual amperometric/field-effect sensor for the detection of dissolved hydrogen
(2011)
Purpose:
At 1.5 T, real-time MRI of joint movement has been shown to be feasible. However, 7 T, provides higher SNR and thus an improved potential for parallel imaging acceleration. The purpose of this work was to build an open, U-shaped eight-channel transmit/receive microstrip coil for 7 T MRI to enable high-resolution and real-time imaging of the moving ankle joint.
Methods:
A U-shaped eight-channel transmit/receive array for the human ankle was built.urn:x-wiley:00942405:mp3399:equation:mp3399-math-0001-parameters and urn:x-wiley:00942405:mp3399:equation:mp3399-math-0002-factor were measured. SAR calculations of different ankle postures were performed to ensure patient safety. Inhomogeneities in the transmit field consequent to the open design were compensated for by the use of static RF shimming. High-resolution and real-time imaging was performed in human volunteers.
Results:
The presented array showed good performance with regard to patient comfort and image quality. High acceleration factors of up to 4 are feasible without visible acceleration artifacts. Reasonable image homogeneity was achieved with RF shimming.
Conclusions:
Open, noncylindrical designs for transmit/receive coils are practical at 7 T and real-time imaging of the moving joint is feasible with the presented coil design.
Operational Modal Analysis (OMA) is a promising candidate for flutter testing and Structural Health Monitoring (SHM) of aircraft wings that are passively excited by wind loads. However, no studies have been published where OMA is tested in transonic flows, which is the dominant condition for large civil aircraft and is characterized by complex and unique aerodynamic phenomena. We use data from the HIRENASD large-scale wind tunnel experiment to automatically extract modal parameters from an ambiently excited wing operated in the transonic regime using two OMA methods: Stochastic Subspace Identification (SSI) and Frequency Domain Decomposition (FDD). The system response is evaluated based on accelerometer measurements. The excitation is investigated from surface pressure measurements. The forcing function is shown to be non-white, non-stationary and contaminated by narrow-banded transonic disturbances. All these properties violate fundamental OMA assumptions about the forcing function. Despite this, all physical modes in the investigated frequency range were successfully identified, and in addition transonic pressure waves were identified as physical modes as well. The SSI method showed superior identification capabilities for the investigated case. The investigation shows that complex transonic flows can interfere with OMA. This can make existing approaches for modal tracking unsuitable for their application to aircraft wings operated in the transonic flight regime. Approaches to separate the true physical modes from the transonic disturbances are discussed.
The present work aimed to study the mainstream feasibility of the deammonifying sludge of side stream of municipal wastewater treatment plant (MWWTP) in Kaster, Germany. For this purpose, the deammonifying sludge available at the side stream was investigated for nitrogen (N) removal with respect to the operational factors temperature (15–30°C), pH value (6.0–8.0) and chemical oxygen demand (COD)/N ratio (≤1.5–6.0). The highest and lowest N-removal rates of 0.13 and 0.045 kg/(m³ d) are achieved at 30 and 15°C, respectively. Different conditions of pH and COD/N ratios in the SBRs of Partial nitritation/anammox (PN/A) significantly influenced both the metabolic processes and associated N-removal rates. The scientific insights gained from the current work signifies the possibility of mainstream PN/A at WWTPs. The current study forms a solid basis of operational window for the upcoming semi-technical trails to be conducted prior to the full-scale mainstream PN/A at WWTP Kaster and WWTPs globally.
Operator
(2009)
Opioid Analgesia in P450 Gene Cluster Knockout Mice: A Search for Analgesia-Relevant Isoforms
(2015)
Optical coherence tomography : a potential tool to predict premature rupture of fetal membranes
(2013)
Optical constants from the far infrared to the X-ray region: Mg, Al, Cu, Ag, Au, Bi, C, and Al₂O₃
(1975)
Optical Fibers as Dosimeter Detectors for Mixed Proton/Neutron Fields - A Biological Dosimeter
(2023)
In recent years, proton therapy has gained importance as a cancer treatment modality due to its conformality with the tumor and the sparing of healthy tissue. However, in the interaction of the protons with the beam line elements and patient tissues, potentially harmful secondary neutrons are always generated. To ensure that this neutron dose is as low as possible, treatment plans could be created to also account for and minimize the neutron dose. To monitor such a treatment plan, a compact, easy to use, and inexpensive dosimeter must be developed that not only measures the physical dose, but which can also distinguish between proton and neutron contributions. To that end, plastic optical fibers with scintillation materials (Gd₂O₂S:Tb, Gd₂O₂S:Eu, and YVO₄:Eu) were irradiated with protons and neutrons. It was confirmed that sensors with different scintillation materials have different sensitivities to protons and neutrons. A combination of these three scintillators can be used to build a detector array to create a biological dosimeter.
Optical flow estimation is known from Computer Vision where it is used to determine obstacle movements through a sequence of images following an assumption of brightness conservation. This paper presents the first study on application of the optical flow method to aerated stepped spillway flows. For this purpose, the flow is captured with a high-speed camera and illuminated with a synchronized LED light source. The flow velocities, obtained using a basic Horn–Schunck method for estimation of the optical flow coupled with an image pyramid multi-resolution approach for image filtering, compare well with data from intrusive conductivity probe measurements. Application of the Horn–Schunck method yields densely populated flow field data sets with velocity information for every pixel. It is found that the image pyramid approach has the most significant effect on the accuracy compared to other image processing techniques. However, the final results show some dependency on the pixel intensity distribution, with better accuracy found for grey values between 100 and 150.
The porosity of surgical meshes makes them flexible for large elastic deformation and establishes the healing conditions of good tissue in growth. The biomechanic modeling of orthotropic and compressible materials requires new materials models and simulstaneoaus fit of deformation in the load direction as well as trannsversely to to load. This nonlinear modeling can be achieved by an optical deformation measurement. At the same time the full field deformation measurement allows the dermination of the change of porosity with deformation. Also the socalled effective porosity, which has been defined to asses the tisssue interatcion with the mesh implants, can be determined from the global deformation of the surgical meshes.
Thin films of poly(ethyleneterephthalate) [PET]were exposed to radiation dose ranging from 10 to 30 kGy by using gamma rays in the range 12.8-177.8 MGy using swift light ions of hydrogen. There was no effect of the radiation dose on the optical behaviour of PET as a result of exposure to radiation dose up to 30 kGy brought about by gamma rays but a significant decrease in the optical band gap values was observed when PET was exposed to swift light ions of hydrogen. The data obtained are discussed in terms of optical studies carried out on PET using swift heavy ions.
Optimal Adjustment Policies
(1990)
Given industrial applications, the costs for the operation and maintenance of a pump system typically far exceed its purchase price. For finding an optimal pump configuration which minimizes not only investment, but life-cycle costs, methods like Technical Operations Research which is based on Mixed-Integer Programming can be applied. However, during the planning phase, the designer is often faced with uncertain input data, e.g. future load demands can only be estimated. In this work, we deal with this uncertainty by developing a chance-constrained two-stage (CCTS) stochastic program. The design and operation of a booster station working under uncertain load demand are optimized to minimize total cost including purchase price, operation cost incurred by energy consumption and penalty cost resulting from water shortage. We find optimized system layouts using a sample average approximation (SAA) algorithm, and analyze the results for different risk levels of water shortage. By adjusting the risk level, the costs and performance range of the system can be balanced, and thus the
system’s resilience can be engineered
Optimisation of a urea selective catalytic reduction system with a coated ceramic mixing element
(2017)
The application of mathematical optimization methods for water supply system design and operation provides the capacity to increase the energy efficiency and to lower the investment costs considerably. We present a system approach for the optimal design and operation of pumping systems in real-world high-rise buildings that is based on the usage of mixed-integer nonlinear and mixed-integer linear modeling approaches. In addition, we consider different booster station topologies, i.e. parallel and series-parallel central booster stations as well as decentral booster stations. To confirm the validity of the underlying optimization models with real-world system behavior, we additionally present validation results based on experiments conducted on a modularly constructed pumping test rig. Within the models we consider layout and control decisions for different load scenarios, leading to a Deterministic Equivalent of a two-stage stochastic optimization program. We use a piecewise linearization as well as a piecewise relaxation of the pumps’ characteristics to derive mixed-integer linear models. Besides the solution with off-the-shelf solvers, we present a problem specific exact solving algorithm to improve the computation time. Focusing on the efficient exploration of the solution space, we divide the problem into smaller subproblems, which partly can be cut off in the solution process. Furthermore, we discuss the performance and applicability of the solution approaches for real buildings and analyze the technical aspects of the solutions from an engineer’s point of view, keeping in mind the economically important trade-off between investment and operation costs.
The immobilization of NAD+-dependent dehydrogenases, in combination with a diaphorase, enables the facile development of multiparametric sensing devices. In this work, an amperometric biosensor array for simultaneous determination of ethanol, formate, d- and l-lactate is presented. Enzyme immobilization on platinum thin-film electrodes was realized by chemical cross-linking with glutaraldehyde. The optimization of the sensor performance was investigated with regard to enzyme loading, glutaraldehyde concentration, pH, cofactor concentration and temperature. Under optimal working conditions (potassium phosphate buffer with pH 7.5, 2.5 mmol L-1 NAD+, 2.0 mmol L-1 ferricyanide, 25 °C and 0.4% glutaraldehyde) the linear working range and sensitivity of the four sensor elements was improved. Simultaneous and cross-talk free measurements of four different metabolic parameters were performed successfully. The reliable analytical performance of the biosensor array was demonstrated by application in a clarified sample of inoculum sludge. Thereby, a promising approach for on-site monitoring of fermentation processes is provided.
A light-addressable potentiometric sensor (LAPS) is a field-effect-based potentiometric device, which detects concentration changes of an analyte solution on the sensor surface in a spatially resolved way. It uses a light source to generate electron–hole pairs inside the semiconductor, which are separated in the depletion region due to an applied bias voltage across the sensor structure and hence, a surface-potential-dependent photocurrent can be read out. However, depending on the beam angle of the light source, scattering effects can occur, which influence the recorded signal in LAPS-based differential measurements. To solve this problem, a novel illumination unit based on a field programmable gate array (FPGA) consisting of 16 small-sized tunable infrared laser-diode modules (LDMs) is developed. Due to the improved focus of the LDMs with a beam angle of only 2 mrad, undesirable scattering effects are minimized. Escherichia coli (E. coli) K12 bacteria are used as a test microorganism to study the extracellular acidification on the sensor surface. Furthermore, a salt bridge chamber is built up and integrated with the LAPS system enabling multi-chamber differential measurements with a single Ag/AgCl reference electrode.
High gradient magnetic separation (HGMS) has been established since the early 1970s. A more recent application of these systems is the use in bioprocesses. To integrate the HGMS in a fermentation process, it is necessary to optimize the separation matrix with regard to the magnetic separation characteristics and permeability of the non-magnetizable components of the fermentation broth. As part of the work presented here, a combined fluidic and magnetic force finite element model simulation was created using the software COMSOL Multiphysics and compared with separation experiments. Finally, as optimal lattice orientation of the separation matrix, a transversal rhombohedral arrangement was defined. The high suitability of the new filter matrix has been verified by separation experiments.
Optimization of Interplanetary Rendezvous Trajectories for Solar Sailcraft Using a Neurocontroller
(2002)
Generally, the quality of a weld joint is directly influenced by the welding input parameter settings. Selection of proper process parameters is important to obtain the desired weld bead profile and quality. In this research work, numerical and graphical optimization techniques of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets were carried out using response surface methodology (RSM) based on Box–Behnken design. The procedure was established to improve the weld quality, increase the productivity and minimize the total operation cost by considering the welding parameters range of laser power (2–2.2 kW), welding speed (40–50 mm/s) and focus position (−1 to 0 mm). It was found that, RSM can be considered as a powerful tool in experimental welding optimization, even when the experimenter does not have a model for the process. Strong, efficient and low cost weld joints could be achieved using the optimum welding conditions.
Optimization of passivation layers for corrosion protection of silicon-based microelectrode arrays
(2000)
Bacillus subtilis and Bacillus licheniformis are widely used for the large-scale industrial production of proteins. These strains can efficiently secrete proteins into the culture medium using the general secretion (Sec) pathway. A characteristic feature of all secreted proteins is their N-terminal signal peptides, which are recognized by the secretion machinery. Here, we have studied the production of an industrially important secreted protease, namely, subtilisin BPN′ from Bacillus amyloliquefaciens. One hundred seventy-three signal peptides originating from B. subtilis and 220 signal peptides from the B. licheniformis type strain were fused to this secretion target and expressed in B. subtilis, and the resulting library was analyzed by high-throughput screening for extracellular proteolytic activity. We have identified a number of signal peptides originating from both organisms which produced significantly increased yield of the secreted protease. Interestingly, we observed that levels of extracellular protease were improved not only in B. subtilis, which was used as the screening host, but also in two different B. licheniformis strains. To date, it is impossible to predict which signal peptide will result in better secretion and thus an improved yield of a given extracellular target protein. Our data show that screening a library consisting of homologous and heterologous signal peptides fused to a target protein can identify more-effective signal peptides, resulting in improved protein export not only in the original screening host but also in different production strains.
Optimization of the immobilization of bacterial spores on glass substrates with organosilanes
(2016)
Spores can be immobilized on biosensors to function as sensitive recognition elements. However, the immobilization can affect the sensitivity and reproducibility of the sensor signal. In this work, three different immobilization strategies with organosilanes were optimized and characterized to immobilize Bacillus atrophaeus spores on glass substrates. Five different silanization parameters were investigated: nature of the solvent, concentration of the silane, silanization time, curing process, and silanization temperature. The resulting silane layers were resistant to a buffer solution (e.g., Ringer solution) with a polysorbate (e.g., Tween®80) and sonication.
Searching optimal interplanetary trajectories for low-thrust spacecraft is usually a difficult and time-consuming task that involves much experience and expert knowledge in astrodynamics and optimal control theory. This is because the convergence behavior of traditional local optimizers, which are based on numerical optimal control methods, depends on an adequate initial guess, which is often hard to find, especially for very-low-thrust trajectories that necessitate many revolutions around the sun. The obtained solutions are typically close to the initial guess that is rarely close to the (unknown) global optimum. Within this paper, trajectory optimization problems are attacked from the perspective of artificial intelligence and machine learning. Inspired by natural archetypes, a smart global method for low-thrust trajectory optimization is proposed that fuses artificial neural networks and evolutionary algorithms into so-called evolutionary neurocontrollers. This novel method runs without an initial guess and does not require the attendance of an expert in astrodynamics and optimal control theory. This paper details how evolutionary neurocontrol works and how it could be implemented. The performance of the method is assessed for three different interplanetary missions with a thrust to mass ratio <0.15mN/kg (solar sail and nuclear electric).
Cardiopulmonary bypass (CPB) is a standard technique for cardiac surgery, but comes with the risk of severe neurological complications (e.g. stroke) caused by embolisms and/or reduced cerebral perfusion. We report on an aortic cannula prototype design (optiCAN) with helical outflow and jet-splitting dispersion tip that could reduce the risk of embolic events and restores cerebral perfusion to 97.5% of physiological flow during CPB in vivo, whereas a commercial curved-tip cannula yields 74.6%. In further in vitro comparison, pressure loss and hemolysis parameters of optiCAN remain unaffected. Results are reproducibly confirmed in silico for an exemplary human aortic anatomy via computational fluid dynamics (CFD) simulations. Based on CFD simulations, we firstly show that optiCAN design improves aortic root washout, which reduces the risk of thromboembolism. Secondly, we identify regions of the aortic intima with increased risk of plaque release by correlating areas of enhanced plaque growth and high wall shear stresses (WSS). From this we propose another easy-to-manufacture cannula design (opti2CAN) that decreases areas burdened by high WSS, while preserving physiological cerebral flow and favorable hemodynamics. With this novel cannula design, we propose a cannulation option to reduce neurological complications and the prevalence of stroke in high-risk patients after CPB.
Optoelectronic Properties of Nanostructured Ensembles Controlled by Biomolecular Logic Systems
(2008)
In proton therapy, the dose from secondary neutrons to the patient can contribute to side effects and the creation of secondary cancer. A simple and fast detection system to distinguish between dose from protons and neutrons both in pretreatment verification as well as potentially in vivo monitoring is needed to minimize dose from secondary neutrons. Two 3 mm long, 1 mm diameter organic scintillators were tested for candidacy to be used in a proton–neutron discrimination detector. The SCSF-3HF (1500) scintillating fibre (Kuraray Co. Chiyoda-ku, Tokyo, Japan) and EJ-260 plastic scintillator (Eljen Technology, Sweetwater, TX, USA) were irradiated at the TRIUMF Neutron Facility and the Proton Therapy Research Centre. In the proton beam, we compared the raw Bragg peak and spread-out Bragg peak response to the industry standard Markus chamber detector. Both scintillator sensors exhibited quenching at high LET in the Bragg peak, presenting a peak-to-entrance ratio of 2.59 for the EJ-260 and 2.63 for the SCSF-3HF fibre, compared to 3.70 for the Markus chamber. The SCSF-3HF sensor demonstrated 1.3 times the sensitivity to protons and 3 times the sensitivity to neutrons as compared to the EJ-260 sensor. Combined with our equations relating neutron and proton contributions to dose during proton irradiations, and the application of Birks’ quenching correction, these fibres provide valid candidates for inexpensive and replicable proton-neutron discrimination detectors
Organization and management of German-Russian joint ventures. Bock, Jürgen; Thielemann, Frank
(1994)
Purpose
The aim of this study was to compare several osteosynthesis techniques (intramedullary headless compression screws, T-plates, and Kirschner wires) for distal epiphyseal fractures of proximal phalanges in a human cadaveric model.
Methods
A total of 90 proximal phalanges from 30 specimens (index, ring, and middle fingers) were used for this study. After stripping off all soft tissue, a transverse distal epiphyseal fracture was simulated at the proximal phalanx. The 30 specimens were randomly assigned to 1 fixation technique (30 per technique), either a 3.0-mm intramedullary headless compression screw, locking plate fixation with a 2.0-mm T-plate, or 2 oblique 1.0-mm Kirschner wires. Displacement analysis (bending, distraction, and torsion) was performed using optical tracking of an applied random speckle pattern after osteosynthesis. Biomechanical testing was performed with increasing cyclic loading and with cyclic load to failure using a biaxial torsion-tension testing machine.
Results
Cannulated intramedullary compression screws showed significantly less displacement at the fracture site in torsional testing. Furthermore, screws were significantly more stable in bending testing. Kirschner wires were significantly less stable than plating or screw fixation in any cyclic load to failure test setup.
Conclusions
Intramedullary compression screws are a highly stable alternative in the treatment of transverse distal epiphyseal phalangeal fractures. Kirschner wires seem to be inferior regarding displacement properties and primary stability.
Clinical relevance
Fracture fixation of phalangeal fractures using plate osteosynthesis may have the advantage of a very rigid reduction, but disadvantages such as stiffness owing to the more invasive surgical approach and soft tissue irritation should be taken into account. Headless compression screws represent a minimally invasive choice for fixation with good biomechanical properties.
Our world is well ordered in measurement and number : or why natural constants are as they are
(2013)
All the important natural constants can be logically explained with and derived from the first four ordinal numbers, 1, 2, 3 and 4, its addition to ten and finally the standard values for obviously maximal feasibility Ω and the optimum in our world, the Golden Section (GS), i.e. the number sequences 273 and 618. They both are the first three numbers of irrational results by an arithmetical transformation of simple geometrical relationships by creating multiplicity out of singularity. Both of them show that the infinite is inherent in finiteness and explain in a simple way the smallest deviations and fluctuations between the physical AS-IS state and the obvious spiritual ideal behind: Wherever we look in this world, and especially in important key-positions, we regularly find these sequences. All of the above mentioned numbers so seem to be key players in our world, what can be demonstrated by the derivation of natural constants.
Outlier Robust Estimation of an Euler Equation Investment Model with German Firm Level Panel Data
(2002)
In this study we observed courses of micturition symptoms and differentiated degrees of symptoms for each point in time while also considering the impact of bothersomeness. Our data show that not only significantly more patients who have undergone BT suffer from OAB than those who have undergone RP, but also that those affected show significantly higher values for severity of OAB symptoms throughout the whole observation period of 36 months. Our data analysis further shows that variability of OAB symptoms as well as fluctuation of severity of OAB symptoms vary to a significantly higher degree after BT than after RP. Looking only at mean figures at a given point in time clearly underestimates the underlying problem. This fact is not reflected in the literature.
Landslides, rock falls or related subaerial and subaqueous mass slides can generate devastating impulse waves in adjacent waterbodies. Such waves can occur in lakes and fjords, or due to glacier calving in bays or at steep ocean coastlines. Infrastructure and residential houses along coastlines of those waterbodies are often situated on low elevation terrain, and are potentially at risk from inundation. Impulse waves, running up a uniform slope and generating an overland flow over an initially dry adjacent horizontal plane, represent a frequently found scenario, which needs to be better understood for disaster planning and mitigation. This study presents a novel set of large-scale flume test focusing on solitary waves propagating over a 1:14.5 slope and breaking onto a horizontal section. Examining the characteristics of overland flow, this study gives, for the first time, insight into the fundamental process of overland flow of a broken solitary wave: its shape and celerity, as well as its momentum when wave breaking has taken place beforehand.
The fundamental modeling of energy systems through individual unit commitment decisions is crucial for energy system planning. However, current large-scale models are not capable of including uncertainties or even risk-averse behavior arising from forecasting errors of variable renewable energies. However, risks associated with uncertain forecasting errors have become increasingly relevant within the process of decarbonization. The intraday market serves to compensate for these forecasting errors. Thus, the uncertainty of forecasting errors results in uncertain intraday prices and quantities. Therefore, this paper proposes a two-stage risk-constrained stochastic optimization approach to fundamentally model unit commitment decisions facing an uncertain intraday market. By the nesting of Lagrangian relaxation and an extended Benders decomposition, this model can be applied to large-scale, e.g., pan-European, power systems. The approach is applied to scenarios for 2023—considering a full nuclear phase-out in Germany—and 2035—considering a full coal phase-out in Germany. First, the influence of the risk factors is evaluated. Furthermore, an evaluation of the market prices shows an increase in price levels as well as an increasing day-ahead-intraday spread in 2023 and in 2035. Finally, it is shown that intraday cross-border trading has a significant influence on trading volumes and prices and ensures a more efficient allocation of resources.
Paracoccus denitrificans for the effluent recycling during continuous denitrification of liquid food
(2010)
Nitrate is an undesirable component of several foods. A typical case of contamination with high nitrate contents is whey concentrate, containing nitrate in concentrations up to 25 l. The microbiological removal of nitrate by Paracoccus denitrificans under formation of harmless nitrogen in combination with a cell retention reactor is described here. Focus lies on the resource-conserving design of a microbal denitrification process. Two methods are compared. The application of polyvinyl alcohol-immobilized cells, which can be applied several times in whey feed, is compared with the implementation of a two step denitrification system. First, the whey concentrate's nitrate is removed by ion exchange and subsequently the eluent regenerated by microorganisms under their retention by crossflow filtration. Nitrite and nitrate concentrations were determined by reflectometric color measurement with a commercially available Reflectoquant® device. Correction factors for these media had to be determined. During the pilot development, bioreactors from 4 to 250 mg·L-1 and crossflow units with membrane areas from 0.02 to 0.80 m2 were examined. Based on the results of the pilot plants, a scaling for the exemplary process of denitrifying 1,000 tons per day is discussed.